Vauxhall/Opel Insignia 2017 onwards Halogen Headlight Replacement TUTORIAL

[@martynrumble3994]

Also same as Holden Commodore ZB in Australia and Buick Regal in the USA except for with LED headlights

[@ailwyngregory1716]

Any advice for the full beam bulb, that’s even more buried under metalwork etc.

[@Jin-Ro]

Take the headlight unit out. It's very easy, and you won't disturb your alignment.

[@ViperMan420]

​@Jin-Ro do you have a video to show how to pull out ?

[@lukebeattie1237]

It’s so hard taking these out and putting them back in. Those 3 metal clips that hold the bulb are awful. Wish they designed it better

[@michaeljhastings72]

Did you manage to do it, any pointers please. I'm struggling to get the bulb out and don't want to use too much force and break them.

[@dano8012]

@@lukebeattie1237 yes made me think he hadn’t explained it properly because my bulb wasn’t coming out. Yeah so use a screw driver to push those two metal bars below one by one and use a pliers to pull the upper one further up. Thats how I got mine done. It just dropped lose. After fixing the bulb in pull the ones below and push the upper metal back in place 👍🏾

[@GSXMAN04]

How do you get to the high beam bulb thanks

[@mattygaga2013]

Honestly, I don't know. I've been looking at how to get there myself but there's so much in the way of the highbeams. I'll do some digging for you and get back

[@GSXMAN04]

@mattygaga2013 just the bar across the opening of the light looks a nightmare

[@mattygaga2013]

@@GSXMAN04 yeah I've wedged my hand in there and got stuck 🤣 ill tinker around when I get a chance and see if there's a way to do it haha

[@GSXMAN04]

@@mattygaga2013 nightmare eh🤣🤣

[@mattygaga2013]

@@GSXMAN04 it's a bloody ballache is what it is 🤣🤣 way to go Vauxhall haha I've got LEDs I wanna put in too lmao

[@giuliodifrancesco6141]

I can't remove the metal plate... I don't want to force too much. You could not have a more detailed explanation, from the video you can see little or nothing. Sorry, I used google translate. I'm Italian and I speak little English...

[@mattygaga2013]

non preoccuparti! è necessario esercitare un po' di pressione su di esso. non si rompe!

[@mattygaga2013]

le alette di metallo sono facili. tirare indietro ciascuno di essi.

[@edwarhys1]

improvement over the Astra then

[@mattygaga2013]

By a mile lol

[@dano8012]

Would’ve been better if you had actually done it.

[@mattygaga2013]

@@dano8012 it was tricky to film one-handed and this was just a reference to how to change the bulbs or to give a rough idea. Thanks for the feedback though!

[@dano8012]

@@mattygaga2013 I finally figured it out and got the exact dimmed light changed. You did help me out! Didn’t have to watch another video 🙏🏽