Vauxhall Opel security pin retrieval - the 4 different ways to obtain the code.

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
In order to answer some questions, and to clarify things, here is a video where I take you through the 4 different ways to retrieve the pin code on Vauxhalls/Opel. (The ones I know about...)
Link on how to dump EPROM : • Clio UHC EPROM 93C66 D...
Link on how to dump MCU : • Renault Scenic Dump UH...
Hope you enjoy the video.
Any questions please put them below.
Like always, thank you for watching!

[@blake5101]

I am a diesel engineer and have not had much to do with cars at all, i have a vectra here with the same engine and this looks exactly like the fault. now i can do some more checking and hopefully solve the problem. this one has now stopped starting altogether. First class video very well put together and content very easy to follow WELL DONE!!!

[@LMAutoRepairs]

Thanks!😊 👍👍👍

[@jamshadahmed3126]

Hi, would you know of this compatible with corsa d 1.3cdti dtj engine?

[@Hellember]

Thank you so much for the video , Would you please provide a link for the OBD cable

[@alderinerush]

Is this the original CarProg or Clone that you are using? Does Clone has the functionality of getting pin code?

[@robbocop33r12]

Just bought that carprog on the strength of this video,unfortunately it didn't read the ECU at all on my 2002 vectra 2.2 dti which has the same ecu in this video,bosch psg16!? Seems a handy little tool though.

[@litiamulala2976]

Hi,I've got an Astra H 2006 model, lost the last key but managed to get a new blade with a virgin chip. I cut the blade, key is able to lock/unlock the car manually and turn ON the engine. I have a Silca tool to programme the key but unfornately I do not have the security /immo code. I'm for a cheaper solution to read the security code. i,ve been thinking of getting carprog v10.05 or v9.31 but I'm not sure whether it can read /extract pin. What is your advice?

[@fiksukadet2492]

Hei I have question about corsa 2007 1.2 desel . My quation is about the chain engen my car driven 230000 , when do you thing should chang the belt chain ,I’m wahtching you from Finland and we like your way for the explaining

[@antodenn381]

How do you know what one is the EEPROM on a Opel zafari 2006 Bcm thanks for your reply great video I have seen all of them and love all of them

[@LMAutoRepairs]

You need to identify them... usually through the number written on them...😉 Thank you for watching and for your comment!

[@joshbennett6293]

Hi mate I tried reading the pin from a astra H 1.7 cdti using carprog but got a message saying unknow device already running . Can you help thanks ?

[@DrivenDIYer]

Nice laptop. I like those HP's. Useful video.

[@LMAutoRepairs]

Yes... they are not bad! Thank you for watching and for your comment! 👍👍

[@annab351]

Hello mate have a Corsa d with the Magneti Marelli ecu 55198931 cj when I connect carprog I can not find it on the ecu list as need to extract pin ....please help

[@aleksandrzizberg6947]

Hello Luis. Could u help .i have 08 vectra c . Have bought op com. When im connecting to diagnostic socket i can see everything. But i cant reset dashboard computer. Op com say : no code index selected. From factory it shows radio and timer. But i want fuel, coolant temperature etc. Thanks

[@moviemania123]

Hi, Can uou please suggest which CarProg version will extract pin code on Corsa D ME7.6 CAN? Thank you

[@LMAutoRepairs]

moviemania123 Hi Check the latest version... Thank you for watching!

[@raimispavardenis5183]

Just what i need now,thanks mate

[@LMAutoRepairs]

😊 👍👍👍

[@doof551]

Great video. I am having difficulty using Carprog and reading Vectra C Siemens Simtec 75 via EOBD to retrieve the pin code. I does not appear to commuicate with the vehicle. I have tried many different configurations. Vaux-Com does connect /read / write to ALL ECU's . Is this normally a probem Any ideas please?

[@LMAutoRepairs]

I never had an issue... it must be your carprog... have you tried it successfully on other ECUs? Thanks for watching and for your comment!

[@andycusworth3323]

Hi and thanks for the videos, you say you use carprog for retreiving pin codes from vauxhalls! I have a corsa d 1.3 cdti on a 09 plate and ive looked and enquired about the chinese carprog software with all 21 leads but they tell me it wont retrieve pin codes from my car? I dont understand because ive watched you do it on your videos. I desperately need to get my ecu pin number , I have opcom latest version but it doesnt let me get the pin numbers. Could you put me right on what software would work for me please?- many thanks Andy

[@LMAutoRepairs]

Hi Yes, carprog does it depending on the ecu fitted on the car... For corsa D I use the Maxisys... Now, with carprog, you can still retrieve the pin, by reading the cluster eeprom... but you need to open the cluster... A quick google search, and you will find other tools dedicated to pin retrieval... You can always go the the dealer... if is a one off, is probably more cost effective... Hope that helps! Thank you for watching!

[@Nkhet]

I just bought a 2005 holden astra AH cdx, it has a cdc 40 opera radio and it keeps displaying DISPLAY SAFE. I don't seem to find the key in its manual. Nor is there an AS button to get to the menu to enter pin. Any suggestion how this can be solved.

[@LMAutoRepairs]

Nikunj Khetani Hi It is more complicated than just find the code... most likely you are going to also need tech2 to reset the display... as it sounds like is not paired with the unit...

[@geoffhunter2970]

If I sent you my SDM from a Corsa D 1.6 vxr 2007 could you reset it without the pass code

[@BRIrwin]

When you say the ECU goes offline to be read by Carprog, is this because you need to have the ECU in boot mode to read the EEPROM? Thanks for the video.

[@LMAutoRepairs]

Pretty much yes... Thank you for watching!

[@claudiotaquedir4062]

I saw your video and enjoyed it a lot. I would like to clarify a doubt, I have a vectra c that broke the ecu, however I was able to buy an ecu from a similar car that lost the keys. Is it possible to communicate the car with the ecu of the other car? Regards

[@LMAutoRepairs]

Cláudio Taquedir Thank you for watching and for your comment! Yes, with the correct connections you should be able to communicate...

[@aymanarabian3003]

my opel vectra c engine ecu is YCLS Can I output the code the same way?

[@LMAutoRepairs]

Ayman Arabian Hi One of this ways will definitely work...

[@timporter4516]

Hi, Foxwell NT530 scanner Opel/Vauxhall special functions will also retrieve and display the car’s security pin code. It worked on my 2001 Vauxhall Corsa c 1.2 16v. I believe you can also erase and program keys.

[@LMAutoRepairs]

Nice to know... I now have the IM608, which also does it... Thank you for the information... 👍👍👍

[@sadikmamoun2847]

hi there thanks for this good video i appriciate what you have did and my name is hicham by the way those are the same proceedures i do but sometimes when the car in much newer when i am stuck thanks again for the video

[@LMAutoRepairs]

sadik mamoun No worries... Thank you for the comment.

[@patelvivek4888]

Very informative 👍👍

[@LMAutoRepairs]

Thanks! 👍👍👍

[@melikhayangalo108]

Hi Sir i have problem with my 2005 opel zafira 2.2se .i took the immobilizer box to program a new key as they were all lost and it was successfully the key is programmed but when I connect to the immo box back to the vehicle it shows a blinking light seemingly that the key doesn't match.can you please help me out what to do now 🙏

[@digitalmonkey3286]

Thanks for the info! Managed to get the PIN from a Zafira B with the Carprog and to program the DRL's. Learned a lot from you! Cheers!

[@LMAutoRepairs]

😉 Really appreciate your feedback! Thank you for watching! 👍

[@thefinestjamelia5029]

Do you reckon it would work for Zafira A ?

[@digitalmonkey3286]

@@thefinestjamelia5029 I think it would. Carprog is a great device!

[@c20let1000]

Another great video with good info 💪, question though, will carprog access the cim to retrieve the pass code as it doesn't have a code with it and it's different to the rest of my bcms, cheers again

[@digitalmonkey3286]

@@c20let1000 you have to locate the eeprom 95160 if I'm not mistaking and you can get the pin from it. But I'm sure that here we have people that are more expirienced than me and can give better advice.

[@joshbennett6293]

Hi mate i need to fit new ECU into a Corsa c bit don't have the Carr pass . If I fit the new ECU can I extract the carpass before I programme the ECU or does it need to be programmed first ?

[@LMAutoRepairs]

Hi You can't program the replacement ecu without the car pin. If the replacement ecu has not been reset, you need the pin from the car the ecu came from... Or as you have seen on this video, you might be able to extract it with carprog... or other capable tool. Thank you for watching and for your comment!

[@abigaillackey357]

Hi I have a corsa 2009 model. my radio if you hold the power bottom and scn together 7 SAFE comes up...and nothing more. It does't want to skip to the code to punch in.

[@LMAutoRepairs]

Abigail Lac Key Hi That means you still have 7 attempts to input the code... which means you have already tried 3 times... leave the radio on for some time and it will eventually allow you to input the code. Should work about 10 or 20 minutes later...

[@johnshere4922]

Hi I just connect op-com to the dash and read the pin bottom left by clicking read eeprom for most models JS

[@LMAutoRepairs]

john shere There is certain models released during a certain period that you can do it... Thank you for watching!

[@Piekartz]

Hi! Awesome video. I have a corsa C with a broken ecu. I installed another one including the transponder detector and keys. How can I program it so the car will start again? Do I have to reset the bcm?

[@LMAutoRepairs]

Piekartz Hi Yes you do... you need program everything in the right order... Thank you for watching and for your comment!

[@Piekartz]

Thanks for the quick reply. I don't have the old security code from the broken ecu. Can I make everything work with the new code (from the second hand ecu)?

[@LMAutoRepairs]

Piekartz You need both codes... You need the code from the car to program the Immobilizer...

[@darrenmicklewright2008]

@@LMAutoRepairs hi I have changed the leds in the speedo and have broken the ribbon for the odometer. Obviously the mileage is not displayed but also the speedo is intermittent and sometimes don't turn on and car won't start and I have to unclip then reclip the wires multiple times then eventually it turns on and car starts and works until the car is turned off and locked then when returning to the car sometimes it will not work again the immobiliser will not turn off and the headlights turn on with the ignition. Plz help me with this

[@LMAutoRepairs]

@@darrenmicklewright2008 Looks like you know exactly what is wrong... How do you want me to help? Repair what you broke, and should work... 👍👍👍

[@sav56125]

Hello, thank you for the video! Where did you buy a carprog programmer and the software for it?

[@LMAutoRepairs]

Andriy S Carprog will come with the software... Google will help you to find it... the original and the clone versions... There is plenty of online sellers... eBay being one of them... Hope that helps.

[@sav56125]

Well, I know what you mean. I have been searching for Carprog in internet. The variety of offers is exactly my problem. I don't know what to buy. I am not sure if the clone will work but obviously there are only clones in internet. That's why I am asking you to tell me a particular offer with a Carprog that definitively works.

[@LMAutoRepairs]

Andriy S I can't really advise you on that... as a clone is always a gamble... it might work jut fine or might not... I am on the second clone carprog... Although I think I have been lucky on this last one.... If you really want to be sure, buy the original...

[@sav56125]

Good, but is it possible to buy an original? I am not sure it exists. I only found a 600USD proposal from Codecard/Atomis. This is some kind of legalized clone. That sounds weird. And to give 600USD for that + SW. I don't know. Probably I'll buy an original OP-COM that seems to work well and is from a serious manufacturer. But unfortunately a basic OP COM version doesn't allow to reset an engine CU. Only 2k€ OP-COM can do that.

[@LMAutoRepairs]

Andriy S The codecard website is the original seller of carprog. The legalisation is something that they started to offer not long ago. The clone car prog is when connected to the Internet, and or uploaded with the original software, the ATMEL chip is killed. What they are offering is the adding of the clone carprog to their database... and that way make it legal. The problem is that clone car progs can fail hardware wise... not sure if you buy another clone, the same legalised software still works... Original op-com is about £700... Carprog and op-com do different things, you need to think what you need the tools for, and from there decide which one to buy...

[@garyprice9544]

Where do u get car prog from thanks?

[@LMAutoRepairs]

Gary Price eBay...

[@martinguitarhd28]

Hi Will carprog read pin code on a 2006 vectra c 1.8 z18xer? Thanks

[@LMAutoRepairs]

Possibly... check the ecu you have against carprog supported ECUs... Thank you for watching!

[@mohammedpervez]

Hi bro nice little video u did there I got opcom myself but I don't have car pass code but I Rang vauxhall and they said we can get u car pass but it will cost u 65pounds Inc VAT.

[@LMAutoRepairs]

Not sure how much they charge... But yes, probably about right... Thank you for watching!

[@silentaviation]

Hi, I tried to use opcom to retrieve the pin from the dash of a 2006 tigra (corsa c), using the read eprom function. It didn’t work, and now when it tries to read the clocks the connection drops and resets every few seconds. I think it’s my fault, because I forgot to press and hold the trip button. :-( So I guess my question is, do you know if there is a way to recover the clocks or is in now toast? The clocks still function as the should but just don’t communicate properly with opcom. I hope you can help. Thank you so much for all your help so far, I’ve learned so much from you already. :-)

[@LMAutoRepairs]

Try to disconnect the battery for a few minutes... see if that resets the cluster... Don't know it is going to work, as I never had that issue, but might worth a try... Thank you for watching!

[@AldiShuli]

Hi Luis. Please can you help on a case with a 2002 corsa c 1.0 petrol. I need to replace ecu. But firstly need to reset / virign the donor ecu or extract pincode and don't know how to do that. I actually have opcom, xprog, galletto, kess, fvdi 2014. Is there any way how to do that? Thank you in advance.

[@LMAutoRepairs]

Hi I never used FVDI... see if that one can read the pin from the engine ecu...

[@AldiShuli]

Just to report back and maybe help someone in the future, I used fvdi to retrieve the pin and it did it successfully. Problem solved :) Thanks again.

[@LMAutoRepairs]

@@AldiShuli Great stuff! Thanks for the feedback!

[@DavidWhite-rf1ki]

Liked your video. I noticed that when you tried to get the ECU info using vaux-com, that it was blank then you did something then the information appeared. What did you do, please? Thankyou.

[@LMAutoRepairs]

David White Hi Well... first I forgot to turn the ignition on... lol Then for some reason opcom stopped communication... perhaps because all the attempts I did before... all I did was disconnect the interface and reconnect...

[@DavidWhite-rf1ki]

lmsvvavr thankyou.

[@LMAutoRepairs]

David White No worries...

[@soptea]

I see that you also have Xprog ,are Carprog and Xprog both necessarily ?Or they complete each other ?

[@LMAutoRepairs]

They complete each other... Although I do prefer Xprog for bench programming...

[@OnP0int]

Hi LM Auto Repairs , recently purchased a Carprog device as yours in this video, managed to read the code following your instructions but however this code is not recognized by the car when trying to program a new key transponder it says is wrong. Any reason for this ?

[@LMAutoRepairs]

Andrei Ciobanu Hi Which tool are you using to program the keys? If you read the code again, does it gives you the exactly same code? Make sure you selected the correct ecu... although you should get no communications if you select the wrong one... Thank you for watching!

[@OnP0int]

LM Auto Repairs Hi, I’m using the OpCom (a chinese clone one not the original) yep l’ve did the read operation a few times and it gives me the same security code, pretty sure the right ECU is selected as the VIN is shown correctly, however this code does not get validated on any operation requiring it within OpCom not only when attempting to program a key ( that was my main purpose). From experience have you seen this behaviour ? Thank you !

[@LMAutoRepairs]

Andrei Ciobanu Unfortunately no... it worked every single time for me... 🤔

[@tommyt4062]

I've been having the exact same problem on an 07 plate astra van, it always gives me the same 4 digit code but I noticed it is actually the first 4 numbers in the VIN and after looking in the dump, carprog is just taking this from the other 10 numbers of the VIN which is next to every line of code. it's so frustrating :-(

[@hsmautoservice158]

Don't know about Carprog (have it, did not use it yet) but I guess you don't have official one, so that might be the problem. Just call the dealer and buy the code, or use official OpCom (some cars you can read code), or Abrites (avdi) for Opel, which I always use (official one) which works fine. If you won't pay for software, might be bitten by wrong codes or non working software, that's evident to the investment you make (the clones are great for service resets, codes reading etc, but deep going stuff... no go)

[@grapewater123]

Hi to you have a link for purchasing carprog?

[@LMAutoRepairs]

Check on eBay...😉 Thank you for watching!

[@gunti80]

excellent video.can you do a video on programming a used bmw cas module.

[@LMAutoRepairs]

gunti80 Hi Thank you for watching and for your comment! If I come across that one, of course I do...

[@borisugljevar2670]

Is there any way to get a security code for me? I have astra h 2005year 1.7 dth. Can i give you some information and you get the code? Thanks anyway

[@LMAutoRepairs]

Hi Have you watched the entire video? I can't just get you the code... unless you have read the eprom of the ECU or similar... Thank you for watching!

[@iduk478]

Which tool can I use to retrieve PIN via OBD port in Peugeot 307?

[@LMAutoRepairs]

There is a few... I believe the obdstar H108 can do it... but I never used such tool... So, don't take my work for it, do your own research first... Thank you for watching!

[@robbocop33r12]

Does your carprog have a listing to do the sagem ecu on the 2004 vivaro?I sold my first Carprog as it couldn't read my vectra,my new Carprog I just bought 'now' reads it? Anyway,back to the vivaro,instead of using the ecu option in carprog,will I be able to extract information to make a spare Key through the eeprom option under Opel?

[@LMAutoRepairs]

The keys on the Vauxhall are not stored on the ecu... as far as I am aware... You just need the pin from the van, and a blank key... I have some videos on that... I think...🤔 If not, there is some to come out... 😋

[@robbocop33r12]

@@LMAutoRepairs ok,guy just doesn't want to give Vauxhall the money for the pin.I've seen people working out pin from dump,maybe try that.

[@LMAutoRepairs]

@@robbocop33r12 Yes... that's possible... 👍

[@robbocop33r12]

@@LMAutoRepairs I have gone into the DASHBOARD-RENAULT section of carprog,and i've discovered the Sagem 93c66 i was looking for,which is the same as the 2004 vivaro!:-) So i just have to work out now how to get the pin code now from the dump i read!

[@localdrone5124]

Hi, i have my car pass, can I pair any ecu with my car pass? Or does the new ecu have to be reset?

[@LMAutoRepairs]

Marcus Venn The "new" ecu needs to be reset first using its own pin code...

[@localdrone5124]

lmsvvavr So I've got a new ecu with a passcode, and I plug that in to my car, and reset it, then repair it with my car using the passcode? Is that ok?

[@LMAutoRepairs]

Marcus Venn Pretty much so... Watch this one, it will might help to clarify some questions... kzbin.info/www/bejne/bWHQpZiLirqtoMk

[@EngrBaljare]

Hi, great Vid.

[@LMAutoRepairs]

Thanks! 👍👍👍

[@dandwrasan2342]

Great vid well done 😊👍🏻 I have one question to Ask you sir regarding changing the immobiliser unit for one from another car

[@LMAutoRepairs]

Hi Which module do you want to change? Thank you for watching and for your comment!

[@dandwrasan2342]

LM Auto Repairs hi thanks so much for your quick reply , I’m interested in buying a corsa combi van 1.9 td it’s a salvage vehicle without the keys and a missing immobiliser unit , could I go to my local scrap yard get another unit from a Vauxhall type car and fit that with the new keys? Would it start or would I need to code it in with the pump like on the fords system

[@LMAutoRepairs]

@@dandwrasan2342 1.9? Are you sure? Which combo chassis is that? C?

[@dandwrasan2342]

LM Auto Repairs sorry about that it’s a 1.7 di 2003

[@LMAutoRepairs]

@@dandwrasan2342 Which modules are missing? The module in the ingnition barrel, is there?

[@antodenn381]

Can you get the code from a use bcm

[@LMAutoRepairs]

You can... need to read the eprom data... Thank you for watching and for your comment!

[@rtt931979]

If i buy another used ecu which is not done a reset from its original vehicle. My question now is there anyway so i can adapt this ecu to my car which has a faulty ecu.

[@LMAutoRepairs]

Yes... clone it... Thank you for watching and for your comment!

[@camilledavid6936]

hello great video, I would like to have your help, because I bought a new module cim, I reprogammed everything, but I locked the cim with bad handling and the car still does not start. when i type the security code to unlock the cim it does not work. you think i can do a reset the ecu and reprogram the cim? or else i have to buy a cim again, which is very expensive in my country. thank you for your response it's been 6 months that I am down. if i do an ecu reset, is it possible to reprogram it?

[@LMAutoRepairs]

It should allow you to reset again... Using the pin you programmed it... But I never did that particular module, nor have researched that... What do you have in live data? Can you see why is locked? Thank you for watching and for your comment!

[@camilledavid6936]

@@LMAutoRepairs in fact i started programming with the lautch 430 pro interface. and when entering the key program, I am mistaken because the program asked for the vehicle's 4-digit pass mode and without paying attention I entered the key code. then by wanting to rectify everything by going through a friend's com op. the car refused the security code to modify the cim .. that's why i want to reset the ecu to see if i can reprogram the cim with the correct security code. I saw in one of your videos how to reset ecu. in order to change the ecu. but how to reprogram the ecu without changing it? DO I have to write down all the data before doing a reset or will it go back to normal automatically if I reprogram the ECU? thank you

[@LMAutoRepairs]

@@camilledavid6936 If the machine you are using, allows you to reset the cim, do it using the 4 digits you used to program it... That should then allow you to program it again using the correct pin... You can save the settings to make it easy afterwards...

[@MrRcarney2010]

I have just had to change the ecu kit on my zafira B ? I did not get the pin can I do this to get the pin code for the car ?

[@LMAutoRepairs]

Yes... one of the techniques explained in the video should help you... 👍👍👍

[@deaniepops1]

Great information. Just 1 question please could you tell me could I put my EPROM chip from my car into a used part which have the same part numbers.😎 .

[@LMAutoRepairs]

Yes! 👍

[@deaniepops1]

@@LMAutoRepairs Thank you for that.😁

[@deaniepops1]

@@LMAutoRepairs just a update on the EPROM chip swap I just have completed... It worked perfectly a relief for me.. thanks again for the help.😎👍

[@LMAutoRepairs]

👍👍👍

[@theaquilaalba]

This is why I love OpCom so much... Never works when you need it.

[@LMAutoRepairs]

🤣🤣🤣🤣 Thank you for watching and for your comment!

[@jureskok1419]

Hi, I have CarProg but I dont know what ECU should I use... from OP-COM i get: System Discripton: DENSO0100 Hardware manufacturer... : DECe01 in CarProg you have only 2 denso both options give me strange characters for pin. Do you have any Idea how to fix my problem?

[@LMAutoRepairs]

If shows "strange characters", that is most like because the ecu is not supported. Thank you for watching and for your comment!

[@omerward9261]

Hi would love to see what opel pin codes You can read with im 608

[@LMAutoRepairs]

👍

[@TheShaunBateman]

Hello mate do you know where i can get vauxcom from I can’t seem to get mine to work!

[@LMAutoRepairs]

Plenty of places out there... vauxcom or Op-com... they are the same... Google will help you...😉 👍👍👍

[@arjunsidhu1140]

hi mate is there anyway to get the carpass code for a corsa d

[@LMAutoRepairs]

Dealer... The pin only, I have videos on the channel on how to get it using different methods... 👍👍👍

[@robbocop33r12]

Im trying to get the immo pin code/security code for a 2004 vauxhall vivaro van,im wondering if you can help me? I know that they use sagem 9936 immobilser that is shared with renault trafics,movano's,masters etc.Now i know for a fact vivaros etc are in the renault pin extractor tool(ive seen them in immobox when doing my vectra)but how can i get renault clip software to recognise the vivaro?,so i can get the isk then get the pin code? How would 'you' go about doing this?Thanks.

[@LMAutoRepairs]

You can try to not read the vin, and manually select a similar Renault, and see if you can trick clip to do it... I never tried, and to be honest, doubt it will work... I would open the bcm, and would read the eeprom... Hope that helps. Thank you for watching and for your comment!

[@robbocop33r12]

@@LMAutoRepairs thanks for the reply,it's just that it mentions Vivaro in the immobox so i thought it would recognise vin ok. Instead of WOL vin it comes up with VSK vin when i try to put in renault trafic for instance,it finds VSK vin too when i try to get vin to Autodetect it. I will try the eeprom BCM route,thanks

[@Fire-gv2wz]

Hi the programme tool where is the best place to get one and a part number?. So I get the right one. thanks

[@LMAutoRepairs]

Try Ebay... There is other places... just Google it...😉 Thank you for watching!

[@Fire-gv2wz]

Thanks for your help What it is I have to do a 2008 1.3 Cdti Corsa d ecu kit. I have removed the 75 hp engine and box. Dtj And fitting the 90hp with the 6 speed gear box. Dth. Because I’m not sure if the dtj 75 ecu will Run the 90 dth. I got a dth ecu kit and I need to correct the Mileage on the clocks. And learn how it’s done Thank you

[@thekeyguy4886]

Hi can you please help at all I have a customer that has a Vauxhall Corsa and they have lost all the keys I cannot access the vehicle but do I need to pick the lock to decode it or is there another way I can get the bitting.

[@LMAutoRepairs]

If all the keys are lost you either get a used ignition barrel with a key, so you can turn the ignition on and from there program a key key, or, if you have the security car have a key cut with the mechanical key code and proceed from there... Thank you for watching!

[@gabrielemancuso2219]

great video, congratulations, can you tell me where I can buy this instrument, I have a control unit taken from the scrapper, it does not remember the license plate of the old car, I would like to recover the car pass, of the "" new "" control unit, and reprogram the control unit with the old key , but I need the cae pass, with this tool you use, can I retrieve the car pass from a 1996 ople tigra? thank you very much

[@LMAutoRepairs]

What unit are we talking about? Engine ecu? Which module is that? Thank you for watching!

[@gabrielemancuso2219]

@@LMAutoRepairs hello, sorry for the English translation, but I'm using a translator, we are talking about an opel tigra 1.4 16v ECU from 1996, months ago, my alternator burned out, shorting the ecu, I got one from the wrecker, same same car year, I would like to reprogram the existing key in this competition ecu, again thanks for your availability

[@gabrielemancuso2219]

@@LMAutoRepairs the control unit is a delco d96017 from 1996, TIGRA 1.4 PETROL 16V INITIALS - X14XE

[@LMAutoRepairs]

Carprog reads and decodes the data, but is by reading the HC11F1 directly... You might be able to read yours as well, and just transfer the data....

[@gabrielemancuso2219]

@@LMAutoRepairs OK thank you very much

[@adgepearce4788]

Hi, I need some help. I'm trying to retrieve the security code on a Vauxhall corsa 1.2 EXP. 2007 .with system name ME7. 62 using op-com and Carprog V10.05 . When I press read all Info it comes up with. Could not send CAN KWP packet. I've also tried it on Key_line. It comes up with. Can't read ECU. Any help Thanks Ade

[@LMAutoRepairs]

Hi I don't have that version... Does it gives you other options for reading? Can you read anything with it? Thank you for watching!

[@adgepearce4788]

@@LMAutoRepairs hi thanks for getting back to me. No it doesn't seem to read anything. Could it be the lap top needs win 10 . I'm running with a lap top win 7 . Thanks Ade

[@LMAutoRepairs]

@@adgepearce4788 Doubts... but might worth to try... Have you used that tool successfully before?

[@adgepearce4788]

@@LMAutoRepairs no just bought it off ebay.

[@LMAutoRepairs]

@@adgepearce4788 I don't want to de-motivate you... but you can have a bad carprog... try it on another OS... and perhaps do something else... just to prove it works... Hope that helps...

[@ReadGospelOfJohn]

Will that method work for ECU of 2011 Corsa D 1.3 (A13DTH) ?

[@LMAutoRepairs]

Which one? 🤷‍♂️

[@ReadGospelOfJohn]

​@@LMAutoRepairs I was asking about CarProg method, but if you ask about exact ECU - I don't know model number I know it's Bosh, but would have to get it out to read the numbers :)

[@craigpetersdeg5cwp877]

Can you extract the IMMO code from the IMMO module itself, as I've just bought an astra g, and the previous owner has had the ecu and IMMO replaced, but it's still coded for the previous vehicle, so Im wanting to correct this but I dont know what code is stored in the IMMO module, or if it even matches with the ecu etc, as the car is flagging up a whole list of DTC's

[@LMAutoRepairs]

Hi You, you should be able to... Thank you for watching!

[@alderinerush]

Carprog does not support Vectra 2.2 z22se engine. Do you know any other similar tool that does?

[@LMAutoRepairs]

Hi There is other tools out there... like OpelScannerCANProPT... Thank you for watching!

[@alderinerush]

LM Auto Repairs Thankyou. I will check it out and hopefully it works haha. This is a complicated car.

[@LMAutoRepairs]

Siddharth Sharma No worries... let us know how it goes... Once you get your head around it it not that bad...

[@Diko.bg_]

@@LMAutoRepairs, yep I am with Vectra 2.2 z22se too.

[@securecloud76]

Hi, i bought the zafira but after that i changed battery and now asking for pin code. Pls ca u help.

[@LMAutoRepairs]

For the radio you mean... correct? Thank you for watching!

[@danielgreen4213]

Can you enter the new pin code with carprog I see you can reset but can you enter the new code? Cheers

[@LMAutoRepairs]

Hi Yes. But once you reset it, you can use any capable tool, like Op-com, to code the new code... Hope that helps. Thank you for watching!

[@danielgreen4213]

@@LMAutoRepairs Hi thanks for the reply yes that's very helpful. Can I also reset a new/second hand ECU if it is installed in my car with carprog also? Basicly I need to change my ecu due to water damage. I have managed to get the pin code of the original ECU and I have a second hand ECU but it has not been reset. Thanks

[@LMAutoRepairs]

Ok So I presume your ecu is not readable... you can use carprog to reset the second hand... but you need the pin from your car to program it...

[@sandyande]

hi sir thanks for video, I have a vauxhall/opel corsa D 2006 the airbag (SDM) unit is faulty car won't crank/start because it's part of immobiliser system. I can source a second hand airbag unit with exact same letters and part code but I cannot get security pin code because they have lost car pass. my question is have u had to program in module on a Vauxhall and could carprog retrieve code from airbag module once connected to the car cheers sandy

[@LMAutoRepairs]

sandy anderson Hi CARPROG retrieves the code from the engine module... You can try to dump the airbag module and then retrieve the pin from there... however, providing that the eeprom from you faulty module is good, you only need the swapped them...

[@folafola007]

lmsvvavr hi, please just to ask if u know if the VAGtacho + opel immo device, will get the ECU pin code (i got astra H)

[@LMAutoRepairs]

fola fola Can't advise on that one... I do not have that tool...

[@nicoskazantzis]

lmsvvavr and what about china clone carprog?for astra h 1.9cdti ecu edc16?

[@folafola007]

Hi nicos, Did u see any clone carprog tho? Please send me link to it, thanks

[@barajasautodiagnostico9925]

thanks bro

[@LMAutoRepairs]

👍

[@NiduDingsda]

Hi, I have a Astra H 2005 with a broken MT35E ECM. I´ve buy a used not reseted ECM. Can i pinout the "new" ECM by connecting to my vehicle to reset the ECM?

[@LMAutoRepairs]

Yes... you can just plug it on the car and then reset... you need however the original pin from the ecu... You need a tool that you going to be able to retrieve the pin directly from the ecm... carprog might be able to it... Thank you for watching!

[@NiduDingsda]

@@LMAutoRepairs Thanks for your answer,... You say might be able,... What is the best program i have to buy? I was close to buy carprog but when you say i hvae to buy another stuff i will do,... I love watching your channel :)

[@LMAutoRepairs]

Just check that carprog is compatible with that ecu... if it is, you should actually be able to do everything with it...

[@kasapis6]

great work thanks can you please give us the link where the best place to buy carpro and the Oppcom thanks

[@LMAutoRepairs]

Op-com or carprog if not original, any place is good... eBay is a trusted place for example...

[@emmanuelachiume3069]

Hi, I have a 2004 Vauxhal Vectra C 2.2 with a Z22SE engine code. The ecu is faulty and I need to change it. I have an ecu from a accident car which intend to use. Which version of CARPROG can I use to read the pin on both ecus?

[@LMAutoRepairs]

Emmanuel Achiume Hi If you are going to buy it, just get hold of the latest version...

[@dirkbrabands5024]

Can you help me how to to retrieve the pin code of a Corsa 1999, engine x12xe?

[@LMAutoRepairs]

Dirk Brabands Hi How can I help? All the info you need is in this video and in the comments...

[@dirkbrabands5024]

Does not work for my car is an immo 1.

[@LMAutoRepairs]

Dirk Brabands Which tool are you using to retrieve the pin?

[@dirkbrabands5024]

Tried with Op-com and Car-prog.

[@hammyhammerson980]

Hey :) is there a way to get the Security Code for a Opel Corsa D 1.2?

[@LMAutoRepairs]

All explained on the video... Here is another way... kzbin.info/www/bejne/qKm0nnmmd7l5oZY Thank you for watching!

[@tulizoneema2523]

@@LMAutoRepairs hi can I get cod for meriva opel 2004 year model?

[@tulizoneema2523]

This is about car radio

[@LMAutoRepairs]

That you need to take it straight from the radio... As the immobiliser code is not the same as the radio...

[@LUSIZO_M]

which OPCOM firmware are you using? v1.59, v1.65, v1.70 or v1.99?

[@LMAutoRepairs]

Hi I have one running on 1.39, and another one that I have updated to 1.65 if I recall correctly... 👍👍👍

[@LUSIZO_M]

Thanks Man 👍🏽

[@romaiz321]

Hi What opcom do you use ? Thanks

[@LMAutoRepairs]

Mr. R.A Hi 2010 and 2012... if I am not mistaken... Thank you for watching!

[@romaiz321]

LM Auto Repairs is it the clone opcom or original ? And have you got a link where you brought your one ? Thanks again

[@LMAutoRepairs]

Mr. R.A My one is clone... I have been thinking in getting the original, and will might do once this one fails... I got my one from eBay... to be fair, wherever you buy it, they all came pretty much from the same place... 👍

[@romaiz321]

LM Auto Repairs do you no what version / firmware opcom you bought? Because I have a opcom clone v1.45 but I cant seem to do what you do like on the astra h my opcom only let's me go on 1 or 2 modules and that's it other modules it can't read them. And when I try to read dtcs on most modules it says can't read ecu make ignition is on etc. Do you get the same or isit just me? Thanks again

[@LMAutoRepairs]

Mr. R.A No... I don't have that issue... but I have two interfaces, one with 1.45, the other one with 1.39 if I am not mistaken...

[@omerward9261]

Can you get the pin with im608

[@LMAutoRepairs]

Yes...

[@Tahsin_Hussain]

Can you Program a key fob for Vauxhall Insignia 2009 with Autel Mk808BT Pro?

[@LMAutoRepairs]

Never used that tool... but I would say, that if you have the pin code of the car, you might be able to... But again, I never used that one... 👍👍👍

[@Tahsin_Hussain]

@@LMAutoRepairs do you know which Model of Autel scanners can Program car keys

[@LMAutoRepairs]

@@Tahsin_Hussain IM608

[@grapewater123]

Can you just try and read all the ECU's until you get the right one?

[@LMAutoRepairs]

You can... Thank you for watching!

[@UKrissy]

Genious, genious, genious! How come I did not check the car pass? Ehhmmm... because i did not have one in the first place? And then the Vauxhall dealer idea! Can't wait to spend another 20 minutes of my life to discover the other two splendid ideas...

[@LMAutoRepairs]

Can't figure out from your comment if your are serious or just trolling... 🤔

[@funfairandthemeparkrides2189]

Hi cod u tell what what the other device was called as I can't hear what you're saying car something to get pin think u

[@LMAutoRepairs]

Carprog... 👍👍👍

[@ashleyjones1976]

I got vectra c sri 2.2 engine code z22yh will carprog recover the car pass

[@LMAutoRepairs]

Depends on the ecu... Check compatibility... Thank you for watching!

[@ashleyjones1976]

@@LMAutoRepairs it a siem 8.1

[@cossiejay1]

hi where do you plug carprog is it in the diagnostic port

[@LMAutoRepairs]

jason redfern Hi Yes it is.

[@thekeyguy4886]

Ok where can i get the key code for the lock so i can cut a key

[@LMAutoRepairs]

As I said... security card... If you don't have it, dealer can issue a new one... in the UK is about £30...(or used to be...😋)

[@geophreymillinga8910]

HOW CAN I BUY THE CARPRO AND SOFTWARE

[@LMAutoRepairs]

Geophrey Millinga Google will help you find it...

[@alexis_gyselinx]

@@LMAutoRepairs Is it not cheaper to directly buy the code?

[@LMAutoRepairs]

@@alexis_gyselinx If you only need it once probably... if you work on multiple cars, probably not... Thank you for watching and for your comment!

[@bitsnbobs1969]

got this kit today same as yours carprog, cant seem to get it to work on my corsa 2005, its 1.1 ecu is bos 01260261208393. tried all menus on left listing ecu

[@LMAutoRepairs]

holly may Are you sure it is compatible with that ecu? What are you trying to do?

[@bitsnbobs1969]

pin code mate i have noticed you have v05.94 mine is v10.05

[@LMAutoRepairs]

holly may You should be able to read the pin code from the dash using opcom... is that the Corsa c?

[@bitsnbobs1969]

yes mate its 2005 will try that tomorrow

[@vvgsi]

clone carprog?

[@LMAutoRepairs]

yep...

[@omerward9261]

Can this work when all key are lost

[@LMAutoRepairs]

Yes...

[@omerward9261]

Even 2009 zafira We're did you get the opcom Software from and carprog For opcom do you need special obd conetion Thanks for your reply

[@fanel-laurentiubuiciuc5428]

Hi...I have a vauxhall astra h with EDC16 ecu....the car prog does don want to connect..i get unknown unit already running...can you help?

[@LMAutoRepairs]

+Fanel-Laurentiu Buiciuc Hi Never come across that problem... Sorry...

[@fanel-laurentiubuiciuc5428]

what about Could not receive CAN kwp frame error?

[@LMAutoRepairs]

Hi Once again, I never came across that problem, so never had to investigate... Have google it, to see what comes up with?

[@Apexmn]

I have my car pass, but it contains many letters and numbers. Then my dashboard requires 4 digit code. How do I proceed ?

[@LMAutoRepairs]

Does the car pass does not have the 4 digits pin/security code? 👍👍👍

[@Apexmn]

@@LMAutoRepairs update : my radio 4 digit pin was inside those 12 digit letters and numbers. So dumb way to put the pin code lol. Thanks for fast reply tho. Goodluck and have a nice day

[@LMAutoRepairs]

👍👍👍

[@carolinaalexandre5473]

carprog read via obd2??

[@LMAutoRepairs]

Depends on the ECU installed... but yes... Thank you for watching and for your comment!

[@carolinaalexandre5473]

@@LMAutoRepairs ok, info opcom: EcuHardware:DEL 012A244500, ManufacEcu 24580393PL, Ecu Soft FLKN, Engine Y18NE, vin 9BGHX19U0BC248070, It s Delco Multec?

[@abdalwahhabbkrosh15]

Hii bro I'm too late in watching this 😅 Bro i hav opel vectra all keys lost how can i get the acsess code 🤔 I wish if uoy can reply🌹

[@LMAutoRepairs]

I thought i have explained it in the video....🤔 What is your doubt? The only other way, if you don't want to go to the dealer, is remove a module, like the cluster or similar, read the data and extract the pin... Thank you for watching!

[@abdalwahhabbkrosh15]

Thank for quick reply

[@abdalwahhabbkrosh15]

The last thing i want to ask ? It's a sily qution how can i knwo the typ of immo in opel cars in general Like vectra c . Vectra h

[@LMAutoRepairs]

@@abdalwahhabbkrosh15 What you mean, with type of immo?

[@abdalwahhabbkrosh15]

@@LMAutoRepairs yep the type of immo

[@medd1951]

mon afficheur devient noir comment svp le reparer opel astra h cdti 1.3

[@LMAutoRepairs]

Mohamed Abdelwahed Hi Which screen are we talking about? The one between the dials on the cluster, or the one for the radio?

[@Mambre79]

You buy units to be able to use carprog? 14 units left (in the message).

[@LMAutoRepairs]

Mambre Khachatryan You can just reprogram the ATMEL chip and that just loads it with 50 units...

[@folafola007]

lmsvvavr hi, its car prog, different from the op com tool? how do i get and use the car prog please? i follow it properly to the using of op.com tool

[@folafola007]

lmsvvavr can op.com tool not be able to read the pin code??

[@LMAutoRepairs]

fola fola Hi CARPROG is a different tool all together... Op-com is not intended to read pin codes, and therefore very limited on that...

[@folafola007]

Oh thnks. I will be needing that too. Plz, Do u know if the ecu pin normally available on the op.com? Or i av to find it all the time with d carprog?

[@inked5145]

Am I imagining things or did you do a video on how to extract the security code directly from the ECU? I can't seem to find it 🥺

[@LMAutoRepairs]

Yes... I have some... Which one are you looking for? On the corsa? 👍👍👍

[@inked5145]

@@LMAutoRepairs I need to replace the ECU on a Astra H. The ECU is dead and I don't think we have the security code for the new second hand ECU.

[@LMAutoRepairs]

You need that case to retrieve the pin from the ecu itself... Depending on the ecu, some tools can read it through OBD... like Carprog... Otherwise, you need to open the ecu to read the data and then retrieve the pin... Which car/ecu are we talking about?

[@inked5145]

@@LMAutoRepairs thanks mate. It's a Astra H. I do have carprog but I didn't think it worked with cars like the Astra H or Corsa D?

[@LMAutoRepairs]

Hi Sorry... missed the Astra H part...😋 Better probably read the eeprom on the bench and extract the pin then...

[@dtmtecnologic7259]

hi.

[@LMAutoRepairs]

Rengny Jose Montas Feliz Hi...

[@ruggerosiap8552]

will the pin come up even if you DON’T have a key with a transponder already pared with the ecu?

[@LMAutoRepairs]

Yes. Thank you for watching!

[@albertngozanguni4248]

can i send you the vin number to my car you retrieve the security code for me?

[@LMAutoRepairs]

albert ngoza nguni I can't do it through the VIN...

[@Wayne-Jones]

Op-com v1.39 can read the security pass (pin code) on selected vehicles, Corsa is one of them. Google "Op-com v1.39" 👍

[@jenjens8684]

Hello LM Auto Repairs. I was looking at dumping a chip, can we find a security code from a Vauxhall CD30? I dont need the Radio/Type Code i need the security code to use op-com. In this video kzbin.info/www/bejne/f2Gbcn9-iKyXm9U do you know what code he's retrieving, any ideas?