I'm getting a vivaro and will definitely copy this! Brilliant 👏
@renaulttraficconversion2 жыл бұрын
Thanks for the video, Ally. Nice van layout. I converted a 2014 Renault Trafic LWB into a "Touring Van". I hope to see more videos of your van in the future. You have a new subscriber. Have a nice day.
@jc_beats_ Жыл бұрын
Nice mate. Just bought my vivaro today. Can’t v wait to get started
@allyfrasermakes Жыл бұрын
Thank you. Have fun with yours.
@danbelltrainerАй бұрын
How'd you get on?
@magnejohansen964017 сағат бұрын
How is the quality on your van?
@kaczor7075 Жыл бұрын
Podoba mi się, wszystko praktyczne i ładnie wygląda. 👍
@choolisa4998 Жыл бұрын
So cool, brilliant ideas, the ID for the dinning and bed are perfect. I would prefer to have a simple kitchen pod unit that I can bring it outdoor for cooking instead of indoor unless it's raining ☔...to minimise any oily fumes dispersion, house keeping or cleaning after cooking ....
@Aprilforevergreen2 жыл бұрын
Very neat design, especially the table/bed board.
@rubytobin92842 жыл бұрын
The woodwork is even more beautiful close up!
@lewisjacksonv17 күн бұрын
Really slick conversion. Like it
@alanwkerr8 ай бұрын
Love this layout. Could i have a copy of the sketch up gor the bed plans please.
@allyfrasermakes8 ай бұрын
Yes of course, just send an email to afwoodworks@gmail.com
@stevezodiac491 Жыл бұрын
Had a Fiat Talento onyx edition 70 reg ( newer version of this van ) fully converted.With a traditional layout you can have side cupboards,a swivel bench seat, 120 cm wide rib bed, fridge, sink, cylinder drop out cabinet, burners etc. Pop top from Drivelodge fitted as well as canopy, diesel heater, two liesure batteries and solar panel. Makes a more useful van than a VW because it is bigger and in LWB form like mine capacious for this type of van and also much cheaper than a VW.
@composedlight685024 күн бұрын
Nice conversion . Do you have any plans and ply/timber details ie thickness etc
@JonChurcher4 ай бұрын
Hi Ally . Is this a lwb vivaro ? Love your work . Any plans or links to where you bought materials and finishes would be greatly appreciated
@allyfrasermakes4 ай бұрын
Hi Jon. Yes it's a lwb. Email afwoodworks@gmail.com and i'll send you the sketchup drawings.
@amywilliams31587 ай бұрын
How did you insulate the side doors?
@allyfrasermakes6 ай бұрын
Same as the rest of the van. I used self adhesive 10mm closed cell foam that comes on a roll. It's awkward to get in through the metalwork, but just do the best you can and then fill where possible with recycled plastic wadding type insulation.
@sawekp8961 Жыл бұрын
Super , urobione,gratuluje
@orlandonelthorpe9027 Жыл бұрын
Just the kind of setup we're looking for Ally, thanks. Just one thing - is your van L1, L2 or L3? We're hoping to get a van that is no more than 5 metres in length; so we can park easily on the street. Cheers
@allyfrasermakes Жыл бұрын
Hi orlando. Thanks for your kind words. I am not aware of there being an L3 version of this van, but this is the LWB Vivaro. It's 2.8m long load space.
@orlandonelthorpe9027 Жыл бұрын
@@allyfrasermakes Thanks
@sinetwo5 ай бұрын
Great conversion!
@AzazelSounds4 ай бұрын
That's mint matey, I've got a 2019 vivaro, how much would you convert mine for bud
@allyfrasermakes3 ай бұрын
Thanks for your interest. Please contact me allyfrasermakes@gmail.com for a consultation and price.
@473specop3 ай бұрын
I have a Vivaro Double cab/Crew van, we made an awning that hangs over the back doors, I use extending poles as it is about a meter proud of the doors and we peg it down. You can 'sit out' with a table and chairs even when raining. Think such an Awning would be useful for yourself.
@Walkingdead695 ай бұрын
Hi Ally. I was looking for ideas to make simple conversation and I come across your ideas and think it’s amazing. Can you describe process please and some materials to use for insulation and other stuff like electrics if you got time. Thank you for sharing
@allyfrasermakes5 ай бұрын
In brief: I used self adhesive closed cell foam to insulate the side panels and roof-this is also good for sound deadening. I used a sheet of 25mm celotex under the plywood floor. Behind all the interior panelling is recycled plastic insulation from B&Q. I carpeted all the metalwork with stretch carpet applied with spray glue. I've used Birch plywood throughout, opting for the thinnest boards to save weight without sacrificing strength where needed. The doors are Valchromat (essentially MR MDF) that I had offcuts of. Electrics were all from Bimble Solar except a few little bits. I'd recommend using a DC-DC charger to charge your leisure battery from the engine battery over a split charger-you get what you pay for. All the rest is head scratching, sketches, measurements and calculations. If you would like my sketchup models please email afwoodworks@gmail.com
@Walkingdead695 ай бұрын
@@allyfrasermakes thank you for replying. Great advice. Cheers
@Ocrivodahistoria2410 ай бұрын
Ficou muito top 🔝 e qual o custo para um realizar um projeto desse numa van Vauxhall VIVARO 2015 ?
@allyfrasermakes10 ай бұрын
Obrigado. Não falo português e isso não foi bem traduzido no Google.
@Ocrivodahistoria2410 ай бұрын
@@allyfrasermakes How much did you spend in cash?
@allyfrasermakes10 ай бұрын
@@Ocrivodahistoria24 The mateerial cost was about £2500.
@PaddyYankee Жыл бұрын
Really like this setup. Would you have any build plans for the furniture to sell?
@allyfrasermakes Жыл бұрын
I basically just made it up as I went along so I don't have any proper plans as such. But if you email afwoodworks@gmail.com I'll send you the sketchup drawings I did. namaste
@SocksWithSandals2 жыл бұрын
Nicely done!
@mirola73Ай бұрын
Nothing that keeps food cold ? (not necessarily a built in fridge)
@pettycassettes3562 Жыл бұрын
Hi mate. Love the build! Is there any chance you have plans for this conversion I could have?
@allyfrasermakes Жыл бұрын
Hello. If you send me an email to afwoodworks@gmail.com I will send you the sketchup drawings I did for this van. It doesn't have measurements on it, I always just calculate them as I go along and they will have been thrown away on a scrap of paper ages ago (although the drawing will be to scale), but you are welcome to see the layout and take inspiration from it. Namaste
@juanjosegarciag10728 ай бұрын
Good afternoon, I've been watching videos of the Renault Trafic camper for quite some time, and the truth is that yours is the one I liked the most. Really, great work. Could you tell me how thick the wood you used for the bed furniture is? Thanks greetings
@allyfrasermakes8 ай бұрын
Hello Juan, Many thanks for your kind words! I used 12mm birch plywood for the table/bed. The fixed units are made from 15 and 12mm plywood. Ally
@magnejohansen964017 сағат бұрын
How is the quality on this type of van?
@gavinmccormack40642 жыл бұрын
totally sick!!!
@mirola7325 күн бұрын
That would create a mess though, sick.
@skelligsauna2315 Жыл бұрын
Nice job. Where did you get that cooker/sink combo?
@allyfrasermakes Жыл бұрын
Hi, it's the Lavanda sink and hob combination unit. Can't remember where from, my client bought it online somewhere.
@daveopenz Жыл бұрын
pretty rad bro. nicely done
@gregorymendyka Жыл бұрын
Great job. Thanks for sharing
@phoonoh5 ай бұрын
Most awkward intro ever 😂 Love it.
@allyfrasermakes5 ай бұрын
You seem to have misspelt awesome. 😉
@phoonoh5 ай бұрын
@@allyfrasermakes It genuinely is awesome. I didn’t even mean it in a negative light. Haha.
@davidmills38272 жыл бұрын
Hi great conversion could you let me know what length of bed did you end up with please also where did you put your leisure batteries in the design thanks great job
@allyfrasermakes2 жыл бұрын
Hi David. The bed is a small double mattress. 1200mm x 1900mm. Obviously any build in a van of this size is going to be a compromise but the bed is one thing I personally think is vital to be comfortable. If I don't sleep the whole trip is dooomed! The leisure batteries were housed on the floor of the van at the far end of the kitchen unit.
@notionarray2 жыл бұрын
Behind the driver's seat
@notionarray2 жыл бұрын
Is what you mean?
@HighlandDetectorist Жыл бұрын
Hey Nice Build. Could you tell me what type and thickness board you used? Have a great day.
@allyfrasermakes Жыл бұрын
Well, I've used different thickness boards everywhere. The roof is panelled with 7mm T&G cladding, the walls are done with 6mm Birch ply to flex in the curves of the van, the furniture is a mix of 12 and 15mm birch ply to keep the weight down but be strong where needed, I used 6 and 9mm for the drawer boxes. The doors are 18mm Valchromat and the floor is 15mm hardwood ply.
@HighlandDetectorist Жыл бұрын
@@allyfrasermakes Thanks for the fast reply, looking at conversion on same year and type van, will be starting soon. Going to use for metal detecting journey's and your build fits my needs. Thanks again.
@bonniecurtis2 ай бұрын
I was wondering what height you’ve done the unit?
@allyfrasermakesАй бұрын
Hi. I assume you mean the height of the kitchen unit, It's 700mm. The seating units are 420mm.
@hughoreillyy Жыл бұрын
Hi just wondering how tall you are? Planning a similar build and worried about hitting my head while sitting. Cheers
@allyfrasermakes Жыл бұрын
I'm 1810mm tall, aka 5' 11" andabit. It's a tight fit as you can see. It's a compromise between seat height and head space.
@myname72842 жыл бұрын
looks good but what does the rest of the bed rest on
@madhairally2 жыл бұрын
There is a fold out leg that supports the far corner of the bed base.
@rightright6582 Жыл бұрын
Nice, can sleep east to west, what is the interior width of the bed?
@allyfrasermakes Жыл бұрын
The bed is 1200 x 1900.
@allanb526 ай бұрын
So when it's cold/raining (every day in the UK) you have go out to make the bed or get you clothes? This is not just an idle moan, a lot of people are looking for ideas building their vans and so many are not using the best system of a rock-n-roll bed. Down in one second up in 5 seconds and with a swivel front seat seating for 4.
@allyfrasermakes5 ай бұрын
You make a valid point, but you're comparing chalk with cheese. I, and many other people here, know which one I prefer the taste of.
@allanb525 ай бұрын
@@allyfrasermakes I am sure lots of people like to get cold and wet, they sell millions of tents. But the point of a camper is a thing called a metal roof so you dont....get you chalk wet. Have you actually tried cooking in the wind of the rain?
@Getknottedjoinery10 ай бұрын
Hey where did you get the gas hob and sink combo
@allyfrasermakes10 ай бұрын
Hi, it's the Lavanda sink and hob combination unit. Can't remember where from, my client bought it online somewhere.
@alicocker32562 жыл бұрын
Tidy 👌🏼
@oasnap6 ай бұрын
Is this a long wheel base or short wheel base van?
@allyfrasermakes6 ай бұрын
It's the long wheel base
@oasnap6 ай бұрын
@@allyfrasermakes Thanks
@HantixGaming2 жыл бұрын
Did you insulate the floor?
@allyfrasermakes2 жыл бұрын
Hi, Yes the floor was insulated with a 25mm sheet of foil board insulation which was bonded down directly to the metal floor of the van.
@HantixGaming2 жыл бұрын
@@allyfrasermakes thanks for the reply. Love the layout I'm going to take a lot of inspiration for my van from yours :)
@alanwkerr8 ай бұрын
I love this layout, could i have a copy of the bed plan sketch please
@davidmills38272 жыл бұрын
Sorry another question how do you access your fresh and waste water
@allyfrasermakes2 жыл бұрын
Hi David. The fresh water is held in 2 x 10L water containers that can be swapped over when they run out. This makes filling easy as you can just carry the bottles to the tap instead of having to drive the van to the tap and have a hose to connect to the water inlet. The waste water drains straight out the bottom of the van. But a collapsible bucket can be used to capture the waste if the situation demands that grey water not be spilled. Such as in a car park.
@webtrekkeruk24878 ай бұрын
Great, but would have preferred the toilet to be more accessible with the bed down for any nighttime 'visits.'
@villesimonen6 ай бұрын
Yöllä nukutaan eikä kakita
@ThorsTreasure Жыл бұрын
Any template for bed please
@allyfrasermakes Жыл бұрын
The bed is just the tabletop, and it just needs to be made to fit between the floor units. I will send you the sketch up plans I made for this van if you email me afwoodworks@gmail.com
@AndrewAyresPodiatry3 ай бұрын
what wheel base is it?
@allyfrasermakes3 ай бұрын
It's the LWB
@MindWaveTransformation Жыл бұрын
22k views! ❤
@allyfrasermakes10 ай бұрын
122K views
@MindWaveTransformation9 ай бұрын
@@allyfrasermakes if only you also wanted another career 😂
@TimesWithJR2 жыл бұрын
Do you have any protects your for sale?
@allyfrasermakes Жыл бұрын
Hi. I currently make everything on commission, but I will soon be making wooden products for sale. Watch this space.
@TimesWithJR Жыл бұрын
@@allyfrasermakes I’ll keep a close eye I’ve just started doing Vanlife so I’ll give your bits a shout when they are made 👍👍
@allyfrasermakes Жыл бұрын
Hi, I do now. Please visit my Etsy shop AllyFraserOriginals.etsy.com
@dugidugi70883 ай бұрын
super brat..!!
@raulako2 жыл бұрын
how big is the bed?
@madhairally2 жыл бұрын
1200 x 1900
@commentdeleted7943 Жыл бұрын
Evening Tawny hooting 2mins in
@pedromoura988811 ай бұрын
Olá. Não colocou sanita química porquê?
@allyfrasermakes11 ай бұрын
El cliente no quería uno. Era sólo para una emergencia, no para uso regular. La furgoneta es demasiado pequeña para cagar en ella.
@jj8526 Жыл бұрын
Very neat design. Only thing I notice in quite a few builds is that you have to get out of the cosy van to set up the bed..? 🚐👏👏☘
@allyfrasermakes Жыл бұрын
This is true, but building anything in a van of this size is going to be a compromise. Maybe with a more sophisticated folding bed design that could be avoided, but then you'd have to give up something else. You can't have it all, unless maybe you convert a 7.5ton truck. The dream!
@Whitburn.Surfboards2 ай бұрын
Could you possibly have the table top without the hinges that way you can stay inside the van and slot them in individually?
@zekewood7625 Жыл бұрын
But you can't STAND up!!
@Flowria3411 ай бұрын
Quel gâchis ! Y a des gens qui honte de rien !!
@allyfrasermakes11 ай бұрын
Pouvez-vous expliquer plus?
@Flowria3411 ай бұрын
@@allyfrasermakes Non.
@paulgwilliam498525 күн бұрын
How tall are you ? Was the edge of your bed rubbing on your heels?? 😂😂😂
@allyfrasermakes24 күн бұрын
I am 5'11", and no, the bed base and mattress are full size double-1900mm long.
@Tids_ Жыл бұрын
You don't see intros like that much these days 😂
@allyfrasermakes Жыл бұрын
It really pleases me that that's the part of this video you commented on. Glad to be of service.
@alanwade8114 Жыл бұрын
GREAT conversion Ally!! .... Would you be kind enough to share your plans/drawings ... will send my email to your email .... Thankyou!