I'm 82 years old, my dad was a sawmill man, got his 1st mill when I was about 4 years old when I was 14 off bearing was my job .I never saw a mill like this one. Would love to see more
@coupe66211 ай бұрын
Thanks for stoping by, and nice to hear about your dad. He bought it to restore a house my father had. It was really handy for sawing the timber. The engine is an old Diesel volvo scania 6 cylinder. We bought the whole sawmill from a small village nearby. The bench is fed by the drivechaft from the engine. I miss using it. But we might do some more sawing And Ill upload more videos. Thanks for watching. Take Care Jack.
@sandrarodriquez60776 жыл бұрын
great looking sawmill we have a belsaw it works great I wish we had one like yours we cut timber with our family its really just so we can hang out together
@coupe6624 жыл бұрын
Its really great fun. I love it. It has brought so much time spent together like you say through the years. Hard woek but fun😎
@Brewster62311 жыл бұрын
Don't listen to all the negative people. Keep up your good work! Wish I was there to help out!
@coupe66212 жыл бұрын
I´m having a hard time understanding why people like you would ever comment stuff like that.. I mean this was our first attempt trying this mill, we set up our self, had my 85 year old gradfather helping us, completley just for our own making planks and board for my fathers house.... You know what, WHAT EVER.. Man,
@gregedwards1921Ай бұрын
Interesting, I could tell you were new,ignore the ignorant people, that's the world we have today, you will learn and be fine, enjoyed your video, stay focused and good luck
@coupe66213 жыл бұрын
Hehe, well it was just a start. and by the way, we´ve managed to saw a LOT of lumber for my fathers house´, works terrific
@kangkasbun16242 жыл бұрын
Good job 👍🏻👍🏻💪🏻
@coupe6622 жыл бұрын
Thanks👌
@tractorman44618 жыл бұрын
Interesting mill....I'd like to see more videos of this mill with such an unusual design. Is the log carriage powered? What is the hp of the power unit for the mill ? There are very few things much more fun than sawing lumber when its not a job !!! ...and pay no attention to the 'arm-chair quarterbacks' that have never even been near a mill but seem to know everything you're doing wrong.... Keep up the good work and its good to see your 85 year old grandpa still out there 'gettin it' !!!
@coupe6628 жыл бұрын
+Tractorman44 Hello Sorry for the late respond. I´d say its about 80 hp. See the other clip Vbeck Lumber saw2This link might help kzbin.info/www/bejne/sKCpkqKleMiLe5Y
@coupe66211 жыл бұрын
Thanks brewster;)
@maonaskjine14 жыл бұрын
@joferg70 excuse me this one is made 1941 in sweden but the engine is an earlie scania 7l diesel it were used in a crucher plant
@coupe6628 жыл бұрын
this might be the first time using the mill, it was recorded for fun. it was not intended to be viewed in a big way like it became to be. We have managed to saw a tons of timber building forexample big garage. thanks for watching, if you ever get to be around one or try one out yourself,especially old one like this .make suredoing that. my grandfather was a woodsman and born 1924. take care please watch the other video using the mill for good angle hehe
@edrobbins11466 жыл бұрын
I am very happy to see that mill in production.People today don't appreciate iron and sweat like this mill anymore. I wish I had it sitting on my property to use .Great video!Keep on milling.
@robertk385011 жыл бұрын
Good job !!!!!!!!!!!
@coupe6628 жыл бұрын
this is an family operation, those off you who dont understand that can get off my back and watch something else
@coupe66215 жыл бұрын
No there´s a plate on it that says 1946, Do you know where your´s was made
@mikelamothesr.89988 жыл бұрын
A little more hearing protection to go 'round and a cant hook or two with maybe a peeve handle and Bob's your uncle! First I have seen with the blade set up that way. Nice operation. Just think of all the money you are saving on gym memberships for the family.
@ИгорьКиселёв-м3хАй бұрын
Пилотами огонь.работники де......мо.
@coupe66212 жыл бұрын
Hey Guys! Check out My new VIDEO VBECK LUMBER SAW 2 set the volume Low!!!!!
@BFloProductions11 жыл бұрын
Don't see that too often, your grandfather was hacking and hacking when you just tap it twice from the bottom and boom! You showed the old timer how it's done.
@grazynazambeanie5963 Жыл бұрын
How did that old man live so long
@coupe662 Жыл бұрын
born 1924 he worked as a timberman most off his his life. Miss him. He had strong hands, My grandfather🕊
@grazynazambeanie5963 Жыл бұрын
@@coupe662 the guy was ahead of his time the mill is nearly a new slide tech . With a well benched saw I bet that thing cut some awesome lumber
@coupe6628 жыл бұрын
carriage is driven by flat drive belts
@eskilkarlstrom4807 Жыл бұрын
Man sågar alltid ensam Eskil Karlström
@coupe662 Жыл бұрын
Eller så sågar man fan som man sågar
@kalmurphy5254 Жыл бұрын
Turn the. Log a Round
@jackypinson435 жыл бұрын
It looks like 1946 except the painted finger nailers
@coupe6625 жыл бұрын
Hehe Maybe youre right, my sister is filming, so thats whats up with the nails
@raimomantynen6592Ай бұрын
KÄYTTÄKÄÄ MOOTORI SAHAA.
@coupe662Ай бұрын
@@raimomantynen6592 vain
@coupe662Ай бұрын
@@raimomantynen6592 mutta se ei ole kilpailu, tämä on hyvä muisto minulle, kun isoisäni oli elossa, se oli ensimmäinen kerta, kun yritimme, lähetä oma videosi sen sijaan
@raimomantynen65922 ай бұрын
Ompa nyhräämistä. 40 vuotta sahannut
@MrLeonard5514 жыл бұрын
Nice nails.
@maonaskjine16 жыл бұрын
Akta fingarna farfaaar!
@Skip-n1c Жыл бұрын
Buy a cant hook or a Peavey. Stop struggling.
@coupe662 Жыл бұрын
We have many, this was the first time! And many many many years ago man😀