Hey Vince! I love your channel because of episodes like this. I think you should do your own version of the old, "The more you know!" thing at the end of these types of videos.
@VCGConstruction5 жыл бұрын
We can add that!!
@jdreynolds295 жыл бұрын
I believe the questions asked once before on a life stream what that was for and I mentioned it was a 1/4 - 20 threaded insert for a magnet accessory that was originally offered for an m12 work light, but that they also offered a hook
@VCGConstruction5 жыл бұрын
I believe you are correct fine sir!
@jameslewis21025 жыл бұрын
Thanks again for the info always good to informed on things like this
@rowanmarriott94594 жыл бұрын
VCG Construction 90
@ryansco125 жыл бұрын
This should have been a 1 minute video
@TheBUGZNTA4 жыл бұрын
80% of this channel could be 1 minute videos however even if you wanted too you cannot do that on youtube. The algorithms that decide what content to promote on youtube will almost never recommend a video thats less than 5 minutes. Just gotta skip.
@jimhansen53953 жыл бұрын
But then he wouldn't have had the pleasure to hear himself talk for 7+ minutes ...
@johnysilver18533 жыл бұрын
No
@carolinojed3 жыл бұрын
Your mom is a 1 minute video
@0987__3 жыл бұрын
Exactly what I was thinking
@lifeisgood0705 жыл бұрын
the hardest thing about those bits is taking them out of the damn box. I always feel like my finger is going to slip and get cut on an adjacent bit. I use needle nose to get them out - it's ridiculous.
@woodcrafter73615 жыл бұрын
agreed to both of you guys. I have the one set with drill bits, and almost diced my fingers trying to get the out. Pliers or something to wedge them from underneath is the way to go.
@simplemanduke71285 жыл бұрын
So true
@musclemad165 жыл бұрын
Lucky I'm an electrician and always have pliers handy just to pull them out
@pharaohacura36185 жыл бұрын
that is the truth 😂😂😂....
@wdr83035 жыл бұрын
lifeisgood070 idk what it’s like for all the kits but some of the bit holders flip up
@willnx2 Жыл бұрын
You are an awesome guy!!! We all appreciate your reviews and all your videos. Keep up the awesomeness!!!
@Jose-fw5gu Жыл бұрын
Go ahead with a great order and order a second meal
@nicgarcia73965 жыл бұрын
They planned on attaching them to the pack out boxes, it went all the way to production on the bit boxes, but VP veto'ed it because they make the pack out organizer box, so it would have took from profits on the new pack out organizer. My uncle works for Milwaukee
@odijamco5 жыл бұрын
Surprised this didn't get more likes. Good info lol
@autonomous445 жыл бұрын
Ah the old “my uncle works for” line of bullshit.
@travis86235 жыл бұрын
@@autonomous44 you know real people work there right? Those people have family one can assume and even friends. No need to be a D Bag your whole life
@autonomous445 жыл бұрын
@@travis8623 You new to the internet or something? The "my uncle works there" shit is an age old classic. Don't jerk my jive, son.
@travis86235 жыл бұрын
@@autonomous44 yawn
@howardcohen27674 жыл бұрын
I store my drill bits with the cutting edges in, not out. First, you never worry about cutting your fingers when putting them in or taking them out. Second, it is easier to see and compare rod sizes than imagining the rod size when looking at the sharp end. It is easier to hold a bolt up to the flat back and see if the bit is a good size. I like the carriage bolt honorable mention idea. The magnet would quickly attract sharp iron filing that would have to be removed or risk injuring skin. The other ideas are good but esoteric for my own use.
@BannedByMe2 жыл бұрын
I never cut my finger doing that I store them normally.
@tommypack9187 Жыл бұрын
@@BannedByMe oh man I have. When new they are hard to remove and I did it first try. Been very careful since, but I'm gonna flip em over now
@TheUpRemix Жыл бұрын
I have to say, “I REALLY appreciate your content and your personality, with your channel and videos!” Provides me a lot of insight into tools and systems. Thank You!!!
@ralphvalkenhoff28875 жыл бұрын
Dude, you have a rare talent. Being able to talk a lot about very little. I for one envy you.
@maxwaters14613 жыл бұрын
You mean his a great bull shitter
@FDWIndisch3 жыл бұрын
@@maxwaters1461he'd be a terrific political candidate; to expound virtues of 1/4"-20 female threads in a mere 7+ minutes. And who watching this couldn't MAKE a belt clip or loop to hang from belt, ladder rung, maybe ear gauge? At least they have a clue what size screw to allow for!
@jeremygrubbs48545 жыл бұрын
I've got 2 sets, and I put a small carabiner clip attached to short nylon webbing on each. Then I just clip them to the D rings for the shoulder strap of my main tool bag. Keeps them hanging conveniently on the side and frees up a lot of real estate inside.
@stefanhaustein5035 жыл бұрын
If they want to go fancy with these boxes, they should design them, so you can remove the bits with on hand. Some times I even need pliers to remove them, especially with oily hands
@yorkrojas145211 ай бұрын
Vince you Blew my Mind Off!! Amazing!!!
@ATLPhotography84 жыл бұрын
For any photographers, we have Peak Design Capture Clips that can be bolted to the Milwaukee tool boxes. Then you can attach the boxes to ANY belt quickly and easily. We also have 1/4”20 neodymium magnet mounts that can hold about 10 lbs.
@larrytheplumber98512 жыл бұрын
Where at ?
@markcraig37022 жыл бұрын
Thanks Vince. Great video. The Kick stand is my Favorite option.
@joefischetti99714 жыл бұрын
Just wondering how long it takes him to complete a home improvement project?
@marekkrepa99823 жыл бұрын
Celebrity's do not do home renovations so probably million years
@Army4Runner3 жыл бұрын
Dude seems to operate in overdrive when he’s motivated and has a goal. Probably surprisingly quicker than most people out there. Not to mention he’s likely the owner of the construction company and not the one swinging a hammer anymore. Can you imagine working for someone who operates at 2x speed?
@Victor829415 жыл бұрын
Kickstand makes the most sense. Thanks for educating viewers like me. #DIY #VCGfamilyforlife #Goodtimes
@VCGConstruction5 жыл бұрын
I like the kickstand myself! What other ways of using the fitting can you think of Victor?
@Victor829415 жыл бұрын
VCG Construction I think retrofitting a screw/nut and bracket like an old phone belt clip so I can pop off when needed. somehow make a row of clip on/off storage. Makes sense in my head but could be an idea. Lol 🤔😂
@VCGConstruction5 жыл бұрын
That’s a good idea, I’ll get on it!!
@Victor829415 жыл бұрын
VCG Construction patent pending lol
@VCGConstruction5 жыл бұрын
Yeah buddy 🤣🤣
@ronaldpellettier34733 жыл бұрын
Hi Vince, you recently reviewed Milwaukee’s little red shockwave toolboxes. Any idea why the bits are so hard to get out? I’m not fond of having my fingers slipping on a drillbit trying to pull it up and out of a too tight holder, and slicing my finger open. DeWalt has a much better style. Flip up 90° and pull the tool out with no effort. I’ve resorted to putting a small stubby screwdriver in the box, and prying up from the bottom on the bit shank until it breaks free. Much savings on Band-Aids!!!!
@davekimbler23085 жыл бұрын
My case came with 3 belt clips along with my m18 drill and 1/4 drive impact and I made my own magnet for it and made a carabiner clip and strap . The clip you had didn’t look like mine , mine looks like the one on you impact on the shelf behind you . My favorite one is the strap w/ carabiner it’ll hook onto anything !
@NickJPDT5 жыл бұрын
Sometimes Milwaukee thinks a little too hard... it’s a bit case
@VCGConstruction5 жыл бұрын
I can see what you're saying!!
@tiebear15 жыл бұрын
I need a drink after watching this
@VCGConstruction5 жыл бұрын
Where you been Big_A? We put your face on a milk carton last week!!
@tiebear15 жыл бұрын
@@VCGConstruction by the time i have been getting home the live streams have been done. But i will be back representing the 609 ... lol
@VCGConstruction5 жыл бұрын
Yooo cuz we need the representation!! Good to hear from you! Glad you’re busy and doing well!
@ivanestrada34685 жыл бұрын
I love what Milwaukee is doing. They are coming up with all kinds of ideas
@VCGConstruction5 жыл бұрын
Many tradespeople use this feature, Milwaukee listens to their customers!!
@andrewdrozd8475 жыл бұрын
Well, time to buy a bag of 1/4-20's, a few magnets, and some epoxy. Thank you for revealing the answer to "What the hell is this for?" My guess for why they dropped the belt clip is that someone went up a ladder and the bit box came down way before they did.
@VCGConstruction5 жыл бұрын
Good idea, and good guess, I’m gonna ask Milwaukee why they “Dropped” the belt clip!!
@barrettalen4 жыл бұрын
If the magnet doesn't go on sale im thanking you ahead of time for the DIY tip.
@ironman1518.3 жыл бұрын
Thank you Vince great to see you demonstrate many uses of tools we are not aware of.
@Mickocarbomb5 жыл бұрын
Probably their tests for the belt clip was turning up multiple failures one and the most major of which I can only assume was that the nut in the case would eventually after X amount of times tear out or the latter of my two ideas was the case would open/it'd get snagged.
@2get2Terrapin3 жыл бұрын
"For some of you watching this, maybe it's not ridiculous." LOL
@makermentality10315 жыл бұрын
Something awesome about those boxes that I found out recently is if you have an old one they will hold Bosch daredevil paddle bits perfectly
@VCGConstruction5 жыл бұрын
Whoa sweet!!
@billmacfukington30105 жыл бұрын
They also fit prefect in the hard cases if you cut spots out for them in the inner liner. I have a hard case for the 1/2” drill and 1/4” impact combo, I keep my 1/2” drill in it and cut out for 4 bit cases and can still put my charger in when I need it.
@VCGConstruction5 жыл бұрын
Nice Mac!!
@rjjrrailsgscalesolenske52315 жыл бұрын
Interesting, but your killing me with the way you say RARE EARTH MAGNET 😂😂😂😂😂 love this channel
@VCGConstruction5 жыл бұрын
🤣🤣🤣
@johnyoho26033 жыл бұрын
I'm wondering if the belt clip is no longer available because it wasn't a tight fit on your belt and they slipped off and fell. Hitting a co-worker with a falling object is a safety issue and they probably got tired of replacing the cases after breaking from the fall. 🤷🏻♂️
@danieljulian44265 жыл бұрын
These cases also nestle very nicely in to the back cavity of the rolling Packout box. The angles match up perfectly.
@VCGConstruction5 жыл бұрын
Beautiful thanks for the feedback Daniel!!
@SLAM63485 жыл бұрын
I think the reason Milwaukee doesn't sell the belt clip anymore is because the nut will pull out of the case. If you look at the case, it shows the nut was pressed in from the outside instead of the inside. So when walking around with the clip on, the case would fall off & spill everything.
@rayring86795 жыл бұрын
I did build a unistrut bracket with 1/4 rod and stand off claps worked pretty good but found out it’s better to have them with me where the works at,so most of my kits made it back into my packout.great vid Vince love the intro music!!!
@VCGConstruction5 жыл бұрын
I feel the same way as you about setting them up, I’d rather have them in my bag!! Thanks Ray!!
@williamking60195 жыл бұрын
And this is why you are #1 the best tool show on the web 🥇🥇🥇🥇🥇🥇🥇🏆🏆🏆
@VCGConstruction5 жыл бұрын
Thanks William we appreciate it!
@stephengreco51155 жыл бұрын
Dude I like the meat of your vids but the intros are too long. Get to the point. Keep up the good info
@danlo40424 жыл бұрын
Lmao said something damn sometimes I just want them to say what video is I don’t need the “jokes” and pointless skits just show me some thing damn it not everyone got mins to waste lol
@StrykerEcks4 жыл бұрын
I've said that before, but he doesn't listen. Now I just skip through the beginning, because I know he's going to rattle-off for a good three to five minutes.
@robertpaige75073 жыл бұрын
Guys. Y'all do realize that these guys are in business of gathering the largest crowd and getting the most views possible on here right? If you don't have the time to waste. Then get off of fkn youtube. It's called personality and a sense of humor. Get one
@alexhendrixxx3 жыл бұрын
Wait what ...You like his meat ? 🤔
@maxwaters14613 жыл бұрын
Exactly, he can easily cut 80% of the BS out and be more productive.
@terry39063 жыл бұрын
Your voice and manner of speaking make me think of a motivational speaker, but one who's really mean about it. "THINGS ARE GONNA GET BETTER! YOU GOT NO CHOICE!" "YOU'RE GONNA BE THE BEST, AND THAT IS A /THREAT/!"
@josephblazei11265 жыл бұрын
It can also be used to attach to a lanyard for overhead work.
@Adam-gn4oo5 жыл бұрын
that was what I was thing beforehe showed us th real attachments
@EternityForest3 жыл бұрын
The tripod thing is ridiculous, but it's an awesome reminder of how handy a 1/4-20 could be on various things.
@davehamilton97425 жыл бұрын
7 minutes of my life I'm never gonna get back
@Echo9034 жыл бұрын
Johnny Doe i think its a joke. Lol
@frescoservice51244 жыл бұрын
Sam Cade I think Johnny doe was joking
@RadDadisRad4 жыл бұрын
Johnny Doe you must be fun...
@jdreynolds295 жыл бұрын
Yep I knew it talkin about the 1/4 - 20 thread insert. originally that was an accessory for a magnet on an M12 work light and they also offer hooks
@VCGConstruction5 жыл бұрын
We couldn’t find any hooks!!
@kenburns12715 жыл бұрын
The magnet can hold fasteners and make them temporarily magnetic to stick to your tool...
@keoniahlo3 жыл бұрын
You beat me to it!
@chrisdenny21405 жыл бұрын
Thank you so much I love milwaukee products and had no idea...
@redsingh19905 жыл бұрын
You could probably put a screw and lanyard to strap it to your tool belt if your working up high.
@jf2mad2 жыл бұрын
Where can you get the bit inserts for the boxes? If you flip the insert so the short b its are pointing at you when the box is open you can fit several more rows of inserts in making it hold a LOT of bits. One box can hold the short version s of pretty much everything you might ever need including redundancies. But I can't find more inserts.
@ToolReviewZone5 жыл бұрын
Always learning something new here bro!
@VCGConstruction5 жыл бұрын
Thanks TRZ we appreciate it !!
@petewoodfine21005 жыл бұрын
Hi Vince. Thanks for the heads up. I would never have guessed.
@VCGConstruction5 жыл бұрын
Thanks Pete, we’re trying to let people know about some of the smaller features built in to their tools to make them more productive!!
@mpetrik15 жыл бұрын
I made my own screw-on magnet before those were available. Bought rare earth magnets at the local surplus store, with holes already in them. I also have one of the smaller boxes with a belt clip, which came from the surplus store as well. Been using these for quite sometime now. I think the kickstand idea is brilliant! Cheers, keep up the great videos.
@dicasolrac5 жыл бұрын
Wow! Thanks again Vince for enlightening us on the use of our tools and accessories!
@VCGConstruction5 жыл бұрын
Thanks buddy we appreciate it!!
@ibrazeau30445 жыл бұрын
Yah, I use the magnet exactly for that purpose... great for up high work! Thanks for the video Vince
@VCGConstruction5 жыл бұрын
What kind of work do you do?
@stephenleepmg1135 жыл бұрын
Good job sir. Love the video. I never those of the magnet. Lol !!!!!!
@ibrazeau30445 жыл бұрын
VCG Construction GC/Project Lead (Director of Operations and Technical Services) for a large multi-res building owning pension fund. I lead crews for renos/turns/construction and take care of asset problems and all procurements. A foot soldier with some influence ;) but I still wear the apron on the go.
@VCGConstruction5 жыл бұрын
A good leader will always lead the charge I Brazeau !!
@VCGConstruction5 жыл бұрын
Thanks Stephen Lee!
@jmwarden13 жыл бұрын
Hey Vince I just bought two of those tool boxes and neither have the 1/4-20 inserts, what's up with that? Also it takes a pair of pliers to pry out the hex inserts.
@philjung90475 жыл бұрын
Thread in a bolt and put the bolt through one of the screwdriver holder holes on top of your ladder so the box doesn't fall off.
@fbeale35372 жыл бұрын
Wow interlocking cases, and a nit hole too, geez I'm so excited I must rush and by two.
@jamesnelson94825 жыл бұрын
The toolboxes have 1/4-20 bolt holes as well so you could use a double threaded stud to attach too the tool box.
@DAROYALTY0015 жыл бұрын
As a Milwaukee resident, not affiliated with the company, the most resourceful way to utilize this is with the magnet and attaching to the top lid of a steel tool box. The profile may just meet that of the lid to conserve space.
@DAROYALTY0015 жыл бұрын
By this, I mean the inside, if you still require direction. In all honesty, are we reviewing a plastic case, or the tool itself?
@stephenleepmg1135 жыл бұрын
Good job sir. I never thought of the magnet. Love the video !!!!!!
@VCGConstruction5 жыл бұрын
Glad the video is helpful Stephen Lee!
@elviszhirzhan44594 жыл бұрын
Just book got my first set of tool and I picked up a set of those and was wondering! Thank you! From Jersey
@VCGConstruction4 жыл бұрын
Thanks Elvis!!
@anthonycaron22655 жыл бұрын
There was just no reason for this to be a 7 minute video
@spacecruisers5 жыл бұрын
Could have done this in 30 seconds or less.
@UnknownUser4355 жыл бұрын
Couldn’t agree more man
@GEK69NY5 жыл бұрын
Come on, it is SHOW.. Don’t like it, don’t watch it!! Simple as that..
@robertjpercival63865 жыл бұрын
Yes! This vid was 5-6 minutes too long. I was reading the Comments on this vid while I was watching it. About the 5 minute mark I realized I had been bamboozled! And so had everyone else. You want to make this a 7 minute vid (and be fair to your audience) you should have had a smoking hot blond in a bikini demo’ing the things you tried fitting to the Milwaukee box.
@bobbyo.84845 жыл бұрын
Gotta love that 10 sec. Skip function KZbin offers. Agreed too long unless you skip in order to get what you're looking for.
@FOXRANGERTAILS4 жыл бұрын
New guy here , just want to say I'm learning a lot thinking of switching careers to electrician, I have IT and heavy mechanic also infantry and cybersecurity experience , but holy cow I like Milwaukee, and my sthils and thanks for information brother , my brother and I are finishing basment on your tips with dry wall , you tube needs more Vince !
@VCGConstruction4 жыл бұрын
Thanks Smokey!
@Klocaine2375 жыл бұрын
Just like most people I like having my kickstand Vinny doing an awesome job keep it up
@VCGConstruction5 жыл бұрын
yeah cuz the kickstand!!
@Jamestorn483 жыл бұрын
Its for belt clips and magnet attachments Milwaukee used to sell. its 1/4 by 20 thread fri, throw a bolt in it of you want. Saved you 6 and a half minutes.
@ryanwilson59364 жыл бұрын
Now I can keep my bits on my fridge!
@Deathbyswordpoint3 жыл бұрын
I like the little Tripod , it has a war of the worlds thing going..... lol
@reaction94495 жыл бұрын
My guess is to hang them on a wall in your garage or shop, peg board or a sheet of wood, whatever you can think up, everyone’s got different and good ideas 👍🏻
@owl3312 жыл бұрын
The magnet; note your music reminded me of of watching videos in school rooms
@nickvandernet4 жыл бұрын
I had to check to see if this was released on April Fools. 😂😂
@refaelss24 жыл бұрын
Hi, I'm from Israel, I love your channel, you are funny, and I also love Milwaukee's tools. Thanks for all the ideas and reviews.
@nbrowser5 жыл бұрын
Oddly as a mechanic...that magnet on the bit case...helps keep the case stay put under the hood of a car while your working on it. I've known about it for years actually!
@VCGConstruction5 жыл бұрын
Awesome Kenneth!!
@John...44...5 жыл бұрын
You do much drilling on an engine like??
@Svendrys5 жыл бұрын
he drill a oil sump when he change oil ;)
@Pippinm72 жыл бұрын
What is the “drill bit” clamp 🗜 on the right side of Milwaukee impact drivers and drills? Bc they don’t hold any Milwaukee drill bits, but it appears it is for drill bits-“the clamp” seems too big for drill bit. Please advise. I have one impact driver and two drills with this. Thanks!-Mike
@erallen975 жыл бұрын
I've always wondered how that would attach to something. To bad the cases don't flip together like the DeWalt cases. Thanks for doing the video!
@Splatterpunk_OldNewYork2 жыл бұрын
You answered that One question. Now I can grow old happy.
@hawkie3335 жыл бұрын
That magnet is slick....slap it right on the side of the drill press!
@HunterXray4 жыл бұрын
So slick that it will slide down other slick surfaces and fall off anyway.
@devoncole4413 жыл бұрын
@@HunterXray he was sticking it on stainless steel
@Dannyaudio692 жыл бұрын
So what is that hole actually used for?
@edwardmartinez45963 жыл бұрын
The gorilla mount on a scaffold is genius!!!! Can’t tell you how many times I have my Milwaukee box flipping back and forth from screw tip to 5/8 drill bit.
@SC_XOLOs5 жыл бұрын
I watch a lot of dumb videos on KZbin, but this one takes the prize !
@luisivan12 жыл бұрын
I must admit, this video was fun to watch. I was wondering the same thing about this box…
@jdreynolds295 жыл бұрын
I haven't watched yet, but fixing to. I'm guessing you're going to talk about the 1/4 -20 threaded insert on the back that is meant for magnets and hooks
@VCGConstruction5 жыл бұрын
Yes sir!
@danstheman333 жыл бұрын
I sometimes use it to check the threads of a 1/4" bolt to confirm that it is in fact 1/4"-20 (which is what I often use with SnapToggle anchors). That's the most useful function I can think of. I've tried the kickstand thing just for fun, that could potentially be useful, but I never carry that bulky case with me anyway. I always wondered why anyone would want to attach a drill bit case to a tripod..
@carlpavey71674 жыл бұрын
7 minutes of my life I will never get back
@jimmyreed60514 жыл бұрын
Annoying personality geeez
@TomlinsTE4 жыл бұрын
8 Minutes if you check back on comments ;p
@AridescentArt4 жыл бұрын
Carl Pavey hahahhahahhaa
@Mrmhibbert5 жыл бұрын
I always just use the thread in the case for sticking them on a peg board. I have always found the shockwave stuff longer lasting than Dewalt and Irwin
@VCGConstruction5 жыл бұрын
Thanks for the feedback Martin, we appreciate it!!
@jeffparker3605 жыл бұрын
That’s pretty funky!
@VCGConstruction5 жыл бұрын
i know right!! You think you'll use the feature now Jeff?
@jeffparker3605 жыл бұрын
VCG Construction it would come in handy when I have a vehicle up on my lift in my garage.
@VCGConstruction5 жыл бұрын
Yup attach right to the undercarriage!!
@electricalron5 жыл бұрын
Been watching for awhile. Subscribed. Nice to know about that Makita case hidden storage. Def never knew that. I'm an electrician almost 30 years now. Point Pleasant NJ over here,
@VCGConstruction5 жыл бұрын
Yoo buddy we're practically neighbors!! Thanks we appreciate it!!
@mjc87615 жыл бұрын
Wow! Great information! I like the magnet use! 😊
@VCGConstruction5 жыл бұрын
thanks MJC!!
@lightbulb77205 жыл бұрын
Another great video Vince. Love the 99% of people don't know about... videos. I don't even own a single Milwaukee tool but I had to watch. I had no idea and now I do.
@VCGConstruction5 жыл бұрын
Awesome light bulb thanks!!
@wootexclusive84995 жыл бұрын
The main reason they have the super duper secret 1/4 20 nut is because guys have waisted miles of good 3m electrical tape, hiding the helpers tools in the ceiling... So Milwaukee said *Voila* ... screw the box right to some all thread! The kid freaks out, everyone laughs and the boss is very happy because only time was wasted... no tape!
@VCGConstruction5 жыл бұрын
🤣🤣
@jasons70445 жыл бұрын
IBEW local?
@dwebbtn87135 жыл бұрын
Can yall do a comparison on mac tools bel 151 vs milwaukee 1/2 impact? Thanks
@gregblau80825 жыл бұрын
I never even thought about what it was for but when you started the video I immediately thought of taking the belt clip off the drill. I have to admit I tried putting the drill on my belt and it's just not practical.
@kelleybruce445 жыл бұрын
Id rather have my drill cliped to my belt... A drill falling from a ladder is much more thant 10.99 that these bits cases start at... I speak from exp.
@davidr25154 жыл бұрын
I use the belt clip to hang a drill on my pant pocket if i'm just putting in a couple screws and dont have a tool belt on. If I'm really working and have my tool belt on, I actually find the best place for the belt clip is to hang the drill in my hammer loop. I also find the belt clip handy to hang drills in the part or a step ladder that connects the 2 legs. But yeah, never actually use a belt clip on a belt. Ryobi used to make a drill bit set storage rack called the "dock it". The mikwaukee sets look like they should fit, but dont. I really wish Milwauke would come out with something similar because my problem isn't what to do with the sets when I'm using them. It's how to store them nicely when I'm done. I probably have at least 10 of these mikwaukee boxes.
@amoscardoza52535 жыл бұрын
The kickstand idea is pretty cool!! I think they got rid of the beltclip idea because where are you supposed to fit it with a toolbelt on. That's my guess, but what do i know. Always hitting us with the great tips brother!! Nice vid! VCG4LIFE!!!!!
@VCGConstruction5 жыл бұрын
Thanks Amos we appreciate it!!
@amoscardoza52535 жыл бұрын
U love is instant!!!!
@ucitymetalhead5 жыл бұрын
use a magnetic gorilapod. you could use one of those fasteners to attach a belt clip.
@realrobertjohnson3 жыл бұрын
What the hell, Vince. I was literally looking at the threaded holes on these cases, like, an hour ago and then BANG! This ad shows up on my KZbin feed! (Thanks!)
@WEALRO5 жыл бұрын
That intro music 🤣 was it in Scarface. Another good video Vince👍
@VCGConstruction5 жыл бұрын
You da man Wealro!!
@ron1martens Жыл бұрын
Nice video Vince. I didn't really pay much attention to the drill and bit cases. I have four milwaukee cases. The drills which fit into an impact driver I have trouble pulling out. They are in so tight I need something like a precision flat edge screw driver to edge them out to avoid cutting my fingers in the case I'm not wearing gloves. I recently bought the cobalt drill bits. I also have masonry. Milwaukee make some very fine drill bits and their quality is good.
@garystephen36115 жыл бұрын
Should do a video of customization of these boxes.
@VCGConstruction5 жыл бұрын
What would you like to see us do to them?
@garystephen36115 жыл бұрын
VCG Construction I just meant show if you loaded any up with other tools. I have customized some of mine with other gear, for instance I have added 1/2”, 3/8” and 1/4” hex drive adapters to one case so I have it to use to drive any size socket with the impact when I work on the car of other equipment.
@VCGConstruction5 жыл бұрын
Got it, we’ll make a video thanks Gary!!
@myphone75682 жыл бұрын
Holy crap man, you just gave me a great idea for drill storage on the wall behind my drill press!
@VCGConstruction2 жыл бұрын
Great!
@SecureRepairAndSales5 жыл бұрын
I always thought it was for a tool belt clip.
@threexxxphat5 жыл бұрын
Bro all my tools are Milwaukee and you finally answered that question I been wondering for like 2 years good work. You now have my vote
@VCGConstruction5 жыл бұрын
Thanks buddy we appreciate it!
@threexxxphat5 жыл бұрын
@@VCGConstruction anytime
@kylesalva26275 жыл бұрын
Always wondered what that was for but I’d never use those attachments lol
@VCGConstruction5 жыл бұрын
Me neither, Now i'm trying to think of other ways to use the nut adapter!!😂😂
@kylesalva26275 жыл бұрын
VCG Construction a few days later I still got no ideas.... this is going to haunt my Milwaukee’s every time I use them
@VCGConstruction5 жыл бұрын
🤣🤣
@hcr12484 жыл бұрын
My honorable mention would to have something between 2 of the boxes that allowed them to be relatively stacked and connected but allowed them to fan out to allow you access to both simultaneously.
@Metzger235 жыл бұрын
I like that magnetic attachment with the box. The DeWalt boxes don't have that option. 50k soon guys!
@VCGConstruction5 жыл бұрын
You da man Kevin!
@derekkindle35582 жыл бұрын
Just joined and love the channel
@VCGConstruction2 жыл бұрын
Thanks Derek we appreciate it! 👍🏻
@HurricanexGame5 жыл бұрын
Working with the Milwaukee shockwave boxes, I’ve noticed that it can take both hands to get a bit out, that’s why I don’t think Milwaukee offers a belt clip with them. Imagine pulling a bit up one handed and your whole bit box just flew up and out..
@VCGConstruction5 жыл бұрын
Yeah that wouldn’t be good!!
@ethanrudat33283 жыл бұрын
I knew about it someone showed me and I completely forgot. The beginning cracked me up!
@AutobahnDan5 жыл бұрын
Hmmm, I wonder if an old removable drill handle threads into it...
@VCGConstruction5 жыл бұрын
We can always check sir!!
@toolswithtim20195 жыл бұрын
The threaded insert on the Milwaukee cases are nice- I threaded some cheap magnets in them and stick them o thr side of my rolling tech cart
@martpav5 жыл бұрын
You can probably take the belt clip off of your M18 Impact and put it on the box. I take them off the tools anyways maybe they intended them to be used with the boxes
@VCGConstruction5 жыл бұрын
Nah, they need some modifications to fit the box!!