New Milwaukee Power Tool Accessory That 99% OF PEOPLE DON'T KNOW ABOUT!

New Milwaukee Power Tool Accessory That 99% OF PEOPLE DON'T KNOW ABOUT is the Milwaukee tool M18 & M12 Super Charger (48-59-1811). We put the new Milwaukee Power Tool Accessory (M18 & M12 Super Charger) Through a timed test to see how much faster and cooler Milwaukee's M18 & M12 Super Charger could charge the REDLITHIUM HIGH OUTPUT HD12.0 battery (48-11-1812) against the Milwaukee tool M18 and M12 Rapid Charger (48-59-1808) Wait till the end for special information about the new Milwaukee power tool accessory that 99% of people don't know about!
Use these links below to buy M18 & M12 Super Charger & VCG Construction may earn a commission:
shrsl.com/1onyb
homedepot.sjv.io/JvYPR
Get #VeryCoolGang Merchandise here! : vcgconstructio...
The Milwaukee tool M18 & M12 Super Charger (48-59-1811) was sent to us for review by Milwaukee Tool

[@mickeyhenderson7704]

I am super V.C.G. fan here! Just my input on charging times. If you used a power strip to power those chargers it might have played a role in charging times. Surge protector power strips will slow down the amp draw that power strip can process. The other thing to look at here is which charger was plugged in closest to the power source because it will become primary on amp draw. Maybe try two completely separate circuits with no power strips and same size/brand/length 10 gauge Extension cord. I’m only speculating, but maybe I’m not. Wonderful videos, awesome insight and amazing energy! Stay true!

[@AntonioClaudioMichael]

Keeping the battery cool as a high ampage is going into the battery is key to keep the cells from dying out

[@VCGConstruction]

Yes that is my understanding as well!

[@draytonPW]

I have an old Black and Decker drill/driver. It has a puny 1.3ah battery. The charger is painfully slow, 4-6 hours for a 1.3ah battery slow. Over 6 years later the 1 battery it came with still works great and still has over 1ah of capacity. My point, if you don't need "Supercharging" stick to standard. Maybe invest in an additional battery instead. Your battery packs will last longer.

[@VCGConstruction]

Thanks Drizzy!!

[@shalebieber6111]

Been using 12 amp hr Bart and charging with rapid charger . I use it in the small shop vac !!! Unlimited performance 1supper long run time2 I charge it at night ! Love that they now have super charger!!!! As always love your video and your character 💪 keep on rocking VCG👍

[@jerrysmith9935]

There's nobody else that explains or test as spot on as your channel keep up the good work always in real life use then hear say facts always 💯 percent getter done

[@jeffstone7912]

Battery’s have a certain shelf life. I stopped buying cordless tools. With the exception of a drill and I still use corded drill’s. Do you want to charge your batteries as low as possible to preserve the life of the battery. I think the Best strategy for going with battery tools is to have lots of batteries. Charge them at home at a slower rate after work for the next day.

[@LynxStarAuto]

That's what I do.

[@ToolReviewZone]

Awesome, informative Overview bro. Very well done

[@VCGConstruction]

Thanks TRZ we appreciate it!!

[@muddybadgers5205]

Vince they have a patent out for HO M12 batteries using 18650 and 21700 cells. I don't see them making it though. It's very hard to keep the voltage balanced when you have different cells in parallel like that

[@nismo4x4n]

not really you can get bms that'll handle a few amps that are smaller than your thumb nail.

[@kingofthecrease30]

Vince is supercharged all the time...milwaukee looked at him and got the idea for it 😂

[@VCGConstruction]

🤣🤣👍🏻

[@TexasBuyer2001]

I think Vince's vest was blinking green during the video at the 20 minute mark. Ha ha ha

[@joejoe6949]

I’m glad to see Milwaukee is sponsoring you brother.

[@sklxfrtmuzik6000]

for real i love everything Milwaukee an this guy takes the stuff i wanna hear favorite channel on KZbin

[@Roblecop]

Shot in the dark here, maybe the Supercharger's time was averaged over let's say ten charges to account for any abnormalities. Just a thought lol I do think the fan would turn on for the M12 port. I cant see why it wouldn't lol Great video guys!

[@VCGConstruction]

Maybe Joshua!

[@zzmalone6720]

Vince, you called it 3 years ago with the High Output label below the 12v receptacle, “Optimized for high output batteries”. 👍🏻😎

[@VCGConstruction]

I have to rewatch this video now… didn’t remember saying that! Thanks ZZ!

[@zzmalone6720]

@@VCGConstruction right around 25 minutes

[@johnholland3476]

My new m18 skilsaw & hammer drill combo out of box charger flashes green / red and won’t charge .it’s the 7 1/4 saw kit

[@kingofthecrease30]

quite frankly...i gotta tell you...that super charger is $170 on sale...$287 list price...and it can only charge either a 12 volt or 18 volt and not both at the same time...thats kinda disappointing...if it has 2 ports it should charge both at the same time

[@VCGConstruction]

If it did that would be a huge bonus!!

[@nicksrandomviews1296]

Just started my milwaukee cordless tool addiction yesterday I picked up the 3/8 drive m12 fuel ratchet and it's awesome I wish I had your collection bro but it will come with time lol. Very cool video thanks for the informative video. 👍

[@codyramos3200]

Holidays . Or black Friday , fathers day etc.. best times to invest in Milwaukee tools.

[@paulw9732]

Awsome vid vince! The super charger seems pretty cool but for 180$ I rather have another battery maybe 2 more batts and keep my rapid.

[@VCGConstruction]

I won’t disagree, quite frankly I’d like to see this included with two 12AH batteries in the new 12” miter saw kit!

[@paulw9732]

VCG Construction we’ve seen 2 9’s for 180$ u can get 2 6’s right now for 220$ at acme tool I’m sure there’s a ton of other batt deals around 180$

[@UnderHisYoke]

Thanks Vince. Always watch your videos before I go buy my next tool for the school district.

[@VCGConstruction]

Thank you for the support Mark!

[@TMCX113]

CONGRATS @VCG Construction ON THE 100k! Yall hit it before July 4th, nice work! 🤘🏻 Keep up the great content and here’s to the next 100! 😎👍🏻👍🏻

[@VCGConstruction]

Thank you the minimalist explorer!

[@noaholiver8163]

So my only question in regards to the super charger is why did they bother with an m12 port on it and not just two m18 ports? Looking at the comparison between the rapid and super charger the charge time for m12 batteries doesn’t change.

[@scottsyverson4260]

Cordless tools are great for certain jobs but I rely on corded tools most of the time. Either way, you still have to get power to a site, be it generator or temp power pole to run your battery chargers and compressors. So there is little extra effort to run heavy duty cords as a branch line to different floors or rooms where you'll be working. Additionally, cordless tool just don't have the continuous torque of a corded tool. Sure they'll do fine for the first half dozen cuts, but then the power starts to draw off.

[@williamabaker12]

I can rip 2x PT over and over and over again with my milwalkee m18 7 1/4 circular saw with a 12 Amp hour battery, and never have a drop in torque. I've got several batteries and the charger charges a dead battery long before I can use one up. Cordless has come so far, they can be used in all but the most intense scenarios. Well, the expensive cordless tools can. Lol

[@genrock6756]

I would be impressed if they make some kind of adapter you put in the battery port then plug it in the outlet. Or a nuclear powered line up. That would be the best.

[@sugargoldy]

Good video Vince I wonder what the longevity is on charging those batteries that fast and do you think they'll ever make a bigger battery than the 12.0

[@baracktrump1410]

What's the part number of that "M18 Upgrade Kit" in the packout case, that's what I want.

[@VCGConstruction]

Tweet at Milwaukee and tell them you want to buy one

[@bobedwards7927]

Ingenious for Milwaukee. buying new batteried forever instead of a one time corded perchase.

[@kennethkuhlman8864]

So after looking at the Milwaukee chart that shows the charge times for various batteries and chargers, it seems like the super charger must charge the HO 6ah, 8ah and 12ah cells separately. The HO 3.0 doesn’t charge faster from the rapid charger to the super charger but it’s only a single row of cells. So does the super charger charge rows of cells separately which would make sense as to why the charge times are so much lower.

[@Neur4xis]

Gotta say, in a pinch ya gotta go with the supercharger. But if you have time, the Rapid charger maintain long life for your batteries since they charge cooler than w the Supercharger.

[@ronalddaron5362]

When is the six pack supercharger coming out

[@chrisrhudy2000]

I think the difference in promised charge time and actual result is caused by how you had the chargers mounted. I'd like to see you try again with them on a shelf sitting on the included feet.

[@ntvtexan5015]

Well, an hour is good, but with the battery "Completely Drained" with no lights, it is safe to assume an extra 5-15 minutes to FULLY LOAD a drained battery. Usually we put a battery on to charge (Milwaukee's assumption most likely) with one light still showing, or has just gone out. Therefore, not quite as much time required to replace the used charge ! Yeah, got a LITTLE bit of something out the Electronics Engineering school 35 years ago !

[@grguy793]

just remember each night when you get home, to plug in and charge all of the batteries over night for tomorrow.

[@simonmarx34]

Plug in at the jobsite, save money!

[@Borescoped]

Vince, YT success/subscribers is like money... Mo money = mo problems Mo Subs = mo trolls Good video! Keep it up! And for all the trolls, haters, whiners, if you don’t like Vince, Nick, Jimmy, KoTC or VCG, or anything else they put a video out on, why do you even bother commenting or watching their videos? Do you really have nothing better to do? Sad really.

[@kalinbanks144]

Congrats on 100K Subscribers guys love your work

[@VCGConstruction]

Thanks Kalin we appreciate it!

[@joshurmetal420]

What is going on 100k 😱. We were just at 30k. Congratulations brother. That happened quick.

[@VCGConstruction]

Thanks Josh we appreciate it!

[@bryanmcfarland967]

Hi Guys!!! There's got to be a physical cost to super/rapid charging a battery. I assume the super/rapid chargers pump higher amps into the batteries to reduce charging time. Just like using an iPad charger (2.4 amps) to faster charge an iPhone (normally charged at 1.0 amps). But, besides the increased heat, I wonder if the life of the battery is significantly reduced with these types of chargers? If so, is that a fair exchange for less battery downtime on the job, but additional battery purchases down the road?

[@VCGConstruction]

The rapid charger was made to accommodate 18650 cells , the new supercharger was designed for the 21700 cells which can be charged at the higher amperage without damage! That is Milwaukee has told us!!

[@bryanmcfarland967]

@@VCGConstruction Cool beans! I wish there was a way to test the effects on battery life span with these chargers, but I guess only time will tell.

[@jonathangarzon2798]

Started dewalt but I'm at a crossroads, I have only two tools so I can still swap platforms and milwuakee batteries are half price as compared to the 60v..... $230 for 2 vs $150 for 1

[@kevinsimonson3327]

The Super draws up to 13A and the Rapid draws 6A. Just asking, was there enough power to give the Super charger room to run. Were they sharing a 15A plug?

[@bobchambers5948]

Hey Vince - If the battery is already at 100 degrees coming off the charger, how hard can you run it before it overheats & goes into thermal shutdown? Imagine being on a jobsite in August when it’s 100+ outside so the air isn’t going to help the battery cool down.

[@amoscardoza5253]

Congratulations on the 100k gentlemen!!! Well done!! #VCG4LIFE!!!! Great vid ,hope they come out with a 4 and 6 port supercharger.

[@Wikisi]

congrats on 100k from down under mate ! cant wait till that hits our shores!

[@VCGConstruction]

Thanks Riki we appreciate it!

[@danielryno]

I can't cut the cord and compressor until they come out with a decent cordless roofing nailer and a siding nailer. Dewalt tried but I think we are still a few years out. In the meantime, I will keep building my Milwaukee inventory. . . .

[@AntonioClaudioMichael]

Love the case with the 3 batteries and the super charger

[@VCGConstruction]

Pretty slick right?

[@AntonioClaudioMichael]

@@VCGConstruction very slick I like looks sweet

[@markschumacher6630]

Milwaukie has got their shit together. Awesome stuff.

[@tc5102]

@Mark Schumacher ....the CEO of Milwaukee was fired from Dewalt....When he was at Dewalt he was not cherished by the company and Dewalt board did not award him for his accomplishments but fired him.....then came Milwaukee who saw the potential that he could change the fortune of Milwaukee......

[@bsdubois]

Milwaukee will have their shit together when they bring production back to the USA.

[@chuckgrumble5440]

@@bsdubois exactly

[@pauliewalnuts2878]

Great vid as always Vince. Congrats on 100K Cuz!

[@VCGConstruction]

Thanks Paulie Paulie Paulie Walnuts, we appreciate it!

[@icemanlittlefeather1288]

The rapid flashes probably means that the charger was balancing the cells in the battery

[@gregdudds5242]

If you plug the chargers direct into a wall socket then run your test it will be far better. Nothing worse than extension leads for burning out battery chargers, drills, saws etc. gx Wales UK

[@marctheimposter]

Its hitting within 10 degrees of 100 where im at, the temp of the super charger is a concern of mine. would it overheat and damage the battery because of the the ambient temp. Is the "smart tech" if you would, able to compensate for temps like that to where it would charge approx. In a similar time?

[@meagaindave2049]

Great video and very informative! Thanks, Vince, for making us part of the 1% ers. That's why we ring that bell like it's 1776! May God bless the VCG!!! 😁

[@VCGConstruction]

That’s right thanks again me again!!

[@MyAlex919]

Where do I get the battery pack out case like he has

[@tomassoyweyvon4902]

Mui Bueno Vicente'....:).....your channel is Bravo!...happy to have found you!

[@davidmoulton5422]

Yet another great informative video thanks Vince

[@VCGConstruction]

Thanks David!!

[@RadDadisRad]

I could use the upgrade kit for my tools. I’ve got 21 tools and 65 batteries and 10 chargers. Would love to know how much faster the 12.0 charges on the supercharger vs the rapid charger.

[@RadDadisRad]

It takes 4 hours and 4 minutes to charge the 12.0 on a standard charger and 2 hours on a rapid charger.

[@codyramos3200]

65 batteries.... Thats insane . I imagine 1/3 of those are the small 2.0 batteries. Even then thats a small fortune just in batteries

[@philipdove1705]

I have 9 12.0 batteries and when running a 9" grinder constantly burn them all in a few hours 11 minutes per battery. My 4 rapid chargers can barely keep up.

[@VCGConstruction]

Will you buy more batteries or the super charger?

[@philipdove1705]

More batteries I guess. I wonder if the runtime is shortened right after a super charge vs. A standard charge. Like If my 9" grinder runs 11mins on a slow charge would it run 8 or 9 minutes on a super rapid charge.

[@James28R]

@@philipdove1705 No, but it will shorten the overall life of the battery. (less cycles)

[@patrickmiller1674]

Only 11 minute son the 9" grinder😕 that's pretty shitty for that giant battery. I expected better.

[@patrickmiller1674]

I would just go corded at that point.

[@toshmiller5571]

Does any tools come with the rapid charger?

[@israelarreolasanchez814]

What battery should I use on the fuel super sawzall.

[@VCGConstruction]

High output batteries, either 6,8, or 12 amp hours

[@dustinpomeroy8817]

I wish they would come out with a 7 1/4 hybrid slider

[@VCGConstruction]

Hybrid in which way?

[@dustinpomeroy8817]

@@VCGConstruction hybrid as in it would have an onboard charger so you could run it off an outlet if need be or run it cordless

[@dwayneroseborough4403]

The fan in the charger would be to cool the components of the charger, this is true if the fan draws air inward around the battery, and expelled warm air from either the backside or underneath. I don't think the charger could cool the battery during charging since the air would be drawn through the hot charger. Make sense? Let me know what you think.

[@duaneadams1617]

Well done Vince!,really enjoyed that,good information

[@VCGConstruction]

Thanks Duane !!

[@Memory_ahole]

Awesome! Hope y’all have a super charged 4th of July!!!

[@VCGConstruction]

You as well Rob!

[@riotwarrior]

What is a milwaukee survival kit in video What is product no for the m18 upgrade kit in packout on left of vid what is included and cost.

[@badlilstang]

The fan won't cool the battery.. its to cool the electronics in the charger it's self. The Rapid Charger is easier on the batteries. Looks like the supercharger will effect battery health as time goes on but who knows.

[@dimik3855]

Man, you took a freaking long time to explain the Supercharger. Of course the batt is gonna get warmer if you charge it faster. Just remember that the faster a batt is charged, the less life-cycles you get out of it. This applies to ALL batteries.

[@germanbustamante9669]

Where you get that packout box with the battery and charger inserts?

[@kylesonsalla7620]

Directly from TTI, they're a display item, not a regular product.

[@graigorygilbert602]

Vince how much is that battery kit with packout case?

[@rosskinnecom1274]

I like to just use my 6 port m18 charger and 4 port m12 charger. Drop em on the charger when i get home and by the time i leave for work their good

[@Frissdas1207]

You either have a faulty charger or a bad current. You're the only reviewer on youtube who's charger didn't charge a depleted 12ah batter in 55 minutes or less.

[@Deek6923]

Im looking at a used m12 drill not brushless comes with charger and two batteries for 65$ is that a good deal?

[@pescatoralpursuit1726]

Grab it and go! It's like a free drill with discounted batteries.

[@RW-MT]

So at the very end when you were talking about the fan keeping the battery cooler and subsequently extending the overall life of the battery, why did you not address the concerning fact that the battery on the super charger was running nearly 20 degrees hotter than the battery on the rapid charger and that the 100+ degree charging temperature of the battery on the super charger could possibly be shortening the life of that $250 battery? You seemed genuinely (appropriately) concerned while discovering that fact, but then just never brought it up again. Why is that?

[@mrpabs5864]

Some things should still be corded like table saws and miter saws.

[@defomatt2684]

My rapid charger squeals like a pig when I charge the 12ah battery

[@markhuru]

Kudos to Milwaukee which I’ve been religiously using since they first developed cordless, i now still have 4 -4.0 batteries that I charge on the 6 pack charger daily and have owned maybe 15 yrs, still running strong.? I had been thru every battery up till brushless and thrown away the old batteries I have used the same battery now in freezing temps to hot running continual usage... it’s as if these batteries are actually too good. Hate to admit it. My initial investment has paid off thousands of dollars in profit. Here’s where vince is smart, he is smoozing Milwaukee to help pay for the new products, wish I could. I want list- table saw, chopsaw, chainsaw, blower, worm drive saw, framing nailer, ect.... New bigger batteries.... I remember buying the tool kits with 2 batteries for $500... now that might buy one tool. Since batteries the tool companies got smart, there should have been a consortium saying all tools should use the same battery Like the d-cell , then you would be able to afford all different brands of tools, Makita ,dewalt, to name a few... now to keep it tidy your stuck to one platform. So pick the one which you prefer. Each manufacturer has its pluses and minuses... Milwaukee I would say is the best because of its battery....

[@mrbig4532]

Where are u from in Philadelphia, I mean what neighborhood? I’m a Philly guy from up around Port Richmond/Fishtown? Have you built any of these over priced stick homes up my way , I mean every empty piece of land from girard to castor aves and the river to Kensington ave has been purchased with permits to build new townhomes and they can’t find enough builders to get them all done this year. It seems like over night all the junkyards along lehigh Ave have been cleaned out and the framing of at least 50 three story row homes have started to take shape. I mean it’s good for my property value but my taxes have gone up 300% in the last five years. I can afford it but my neighbors who have been in their home since 1953 are retired and have a bunch of pensions and social security checks coming in but if the taxes keep going up on that trajectory in another five years they may have to sell their properties and move out of the city.

[@VCGConstruction]

South Philadelphia, I’ve not built any of those new homes! Big influx from New York is buying them up supposedly!!

[@mrbig4532]

Thanks for getting back to me I really enjoy your channel.

[@eddiemartin7403]

Was the 9.0 a mistake? It doesn't have the benefits of the 8.0

[@lordravencarver242]

My thing is why don't the trees get the batteries I have a lot of battery be nice if they would be customized to fit batteries like a battery pack out

[@ShartSydePhil]

"Heat is no buono" -Vince, VCG Construction

[@1stFlyingeagle]

And how does it destroy the long term use of the battery

[@666Beard]

I do wish Milwaukee would make an ac adapter

[@dcl97]

Maybe they will eventually, but it's much more difficult to convert 120v to 18v with a high current draw than it is with 60v. It's like trying to force 100 gpm through a quarter inch pipe. Hitatchi's 36v system is already pushing the limits of what is realistically feasible.

[@j.m.5995]

Portable power tools - A crackheads best friend!

[@geraldpadley769]

Need some HD battery in 12v

[@uTubed007]

When you are questioning why it took 1min. o1 52 sec to fully charge the battery: Had you put the charger in a normal horizontal position, the battery's heat would have dissipated better and the charger could have used a higher charging current thus reducing charge time.

[@truthserum9157]

Don’t you mean 1 hr 52 min, and it won’t matter what position you charge it in it’s has a fan forced air flow.

[@4rari89]

Ditch the high quality upload for 1080p @60fps. This guy gives me motion sickness with those Italian talking hands being thrown around lol 😁

[@6.7Rollin]

An do not use the anything other than an a 6.0 on the sawzall. I do demolition. I have ruined the port to where the tool connects to the charger.

[@gGeorge96]

Hey Vince. Any idea when those sweet new Milwaukee safety glasses will be released with the usual places where Milwaukee items can be bought?

[@VCGConstruction]

New Milwaukee Tools Announced At #NPS19 Won't Be Available Until.. kzbin.info/www/bejne/d6CQdJ17rNqre7s

[@sickduck4799]

Supercharger

[@VCGConstruction]

Yooo Sick Duck!!

[@MehmieA]

The fan is not for cooling the battery Vince. It's for cooling the electronics.

[@RELK213]

Now I see why my 8.0 battery was taking more than usual on my rapid charger..

[@adannava439]

The only problem I’ve with the milwaukee batteries in winter time and low tempetures the batteries wont charge and have to heat them up with a heating gun to get them to start charging.... anybody else expierence the same problem.?

[@VCGConstruction]

How cold are we talking?

[@adannava439]

Winter season here in Iowa

[@jimmyparaha925]

i feel ripped off just bought the rapid charger not knowing the new charger was coming out

[@bonesrhodes3762]

---- everyone knows that batteries are the weak link - and that the current only solution is deep, deep pockets so you can afford a slew of extra batteries - I laid out almost a $$grand on M18 batteries ( on sale ) and got 6 batteries: 3 12s and 3 8s ( 8s, btw, are garbage - ALL have bit the dust in less than a year ) - this helped but hardly solved the dead battery wait - what Milwaukee needs to make is an adapter which will allow you to use the tools corded from a 110 outlet while the batteries charge

[@thegunner12345678ify]

12.0 battery on amazon 155$

[@mikemills8765]

I'm all in on Milwaukee Fuel cordless - didn't need a Milwaukee commercial.

[@TRUESTHEART.]

💜💜 you read my mind but the m12. 1/4 haVe different models. What's the diff babycakes,

[@mikemills8765]

@@ar-sithf.austin3744 You stated the Fuel was only for "Industrial Maintenance and Industrial/heavy equipment maintenance". and "General everyday applications will never need the FUEL system". That's what I take issue with. But if all you use is M12 - you wouldn't know what builders use in the real world. Stick to your Craftsman cordless.

[@mikemills8765]

@@ar-sithf.austin3744 If it's not "what I Stated" how did it get in your post?

[@kikenium1]

👏👏👏👏👏👏👏👏👏👏👏👏

[@petecarroll3949]

Whose going be the first to come out with a corded/ cordless line of tools.

[@jfloydsea]

Just remember that the faster you charge a battery, the fewer cycles you’ll get out of it. For the most longevity, use your slowest battery charger (lowest amps). Only super charge if you really need it quick.

[@andrewcaballero6288]

Damn how do you know this?

[@chicoandthem4n]

@@andrewcaballero6288 this is common knowledge, all batteries work like this.

[@imashbuttons1734]

@@andrewcaballero6288 charging them faster heats them up more

[@truthserum9157]

Your all wrong, it’s heat that destroy’s batteries not how fast, if the charger has a fan then you can increase the the amp rate charge with shorter time.

[@jfloydsea]

@@truthserum9157 chargers have fans to cool their internal components. I’ve never seen a charger that cools the batteries.

[@makaynchealhalibbealkhooo9673]

Nobody:..... Vince: here’s the deal 😂😂

[@gtm624]

Now we just have to fight over receptacles and charging areas 😂

[@malan828]

Always thought of getting one of those inverters in my van and leaving a charger plugged in so while im riding around my batteries will charge.

[@cabbyhubby]

The job site is not full cordless......the first thing the cordless boys do is plug in their battery chargers 🤔

[@VCGConstruction]

🤣🤣

[@gmburzynski68]

But,,,,lol,,,Milwaukee does make a 12v charger that plugs into your truck

[@mrniusi11]

except you're not tripping over or rolling up chargers

[@NoBody-ro3xj]

@@mrniusi11 you have not seen chargers from 5 trades plugged in lol

[@davemontano3790]

@@gmburzynski68yes and it’s the best method to charge off of 12 volts because dc to dc appliances do not waste energy. Unless it’s an inverter charger or something. I doubt that because why invert an already 12 v battery. I’m gonna look the charger up now! Thanks

[@dan69golf]

Maybe at the 1hr blinking, it took 14 min and cooled down from 102 to maybe 90 degrees. You should have checked temp at blinking vs solid green. BUT let's retest 😎love the info KEEP IT UP.

[@acespark1]

The biggest problem on any site is theft of you brand new $300 battery and maybe the charger aswell

[@josephmcdonald1257]

Does the one key not track the batteries as well I know they have the little signal symbol on it but does that mean you can track just the battery without the tool

[@mjc8761]

Very informative! Super charger looks awesome I will need to get it for my husband 😊

[@VCGConstruction]

Sounds good MJC!

[@kmacnumber2]

MJ C wish my wife would buy me power tools.

[@robgarcia4426]

18 min in i realize.... dang hes got the milwakee phone charger cord too haha nice

[@VCGConstruction]

😂😍😍👍

[@igorsolovyanchik8955]

Why would you take some one's power cord with out asking them first?

[@MrItalianfighter1]

Cause that's what they do. When it comes down to it, everybody's power hungry.🤣

[@mz7242]

I believe fast charging shortens the overall battery life , so batteries would not last as long meaning having to buy batteries more often......the house always wins

[@EricSmith-lj7ln]

Not with the biggest batteries.