New Milwaukee Power Tool Accessory That 99% OF PEOPLE DON'T KNOW ABOUT!

New Milwaukee Power Tool Accessory That 99% OF PEOPLE DON'T KNOW ABOUT is the Milwaukee tool M18 & M12 Super Charger (48-59-1811). We put the new Milwaukee Power Tool Accessory (M18 & M12 Super Charger) Through a timed test to see how much faster and cooler Milwaukee's M18 & M12 Super Charger could charge the REDLITHIUM HIGH OUTPUT HD12.0 battery (48-11-1812) against the Milwaukee tool M18 and M12 Rapid Charger (48-59-1808) Wait till the end for special information about the new Milwaukee power tool accessory that 99% of people don't know about!
Use these links below to buy M18 & M12 Super Charger & VCG Construction may earn a commission:
shrsl.com/1onyb
homedepot.sjv.io/JvYPR
Get #VeryCoolGang Merchandise here! : vcgconstruction.com/store
The Milwaukee tool M18 & M12 Super Charger (48-59-1811) was sent to us for review by Milwaukee Tool

[@jackjkantrowitz50kantrowit12]

Thank you Vince for helping to keep us informed on both the pro’s and con’s of new products.

[@mikemills8765]

I'm all in on Milwaukee Fuel cordless - didn't need a Milwaukee commercial.

[@TRUESTHEART.]

💜💜 you read my mind but the m12. 1/4 haVe different models. What's the diff babycakes,

[@mikemills8765]

@@ar-sithf.austin3744 You stated the Fuel was only for "Industrial Maintenance and Industrial/heavy equipment maintenance". and "General everyday applications will never need the FUEL system". That's what I take issue with. But if all you use is M12 - you wouldn't know what builders use in the real world. Stick to your Craftsman cordless.

[@mikemills8765]

@@ar-sithf.austin3744 If it's not "what I Stated" how did it get in your post?

[@kikenium1]

👏👏👏👏👏👏👏👏👏👏👏👏

[@petecarroll3949]

Whose going be the first to come out with a corded/ cordless line of tools.

[@shalebieber6111]

Been using 12 amp hr Bart and charging with rapid charger . I use it in the small shop vac !!! Unlimited performance 1supper long run time2 I charge it at night ! Love that they now have super charger!!!! As always love your video and your character 💪 keep on rocking VCG👍

[@jmwarden1]

Hey Vince, when Milwaukee first came out with the Super Charger I order one from Northern Tool, they had a special deal, the charger plus I believe a 9 amp battery for the price of just the charger, it was on order for months and they finally gave up getting it and so did I, After seeing that demo I'm content with my 3 Rapid Chargers. Thanks for the great videos

[@dan69golf]

Maybe at the 1hr blinking, it took 14 min and cooled down from 102 to maybe 90 degrees. You should have checked temp at blinking vs solid green. BUT let's retest 😎love the info KEEP IT UP.

[@mickeyhenderson7704]

I am super V.C.G. fan here! Just my input on charging times. If you used a power strip to power those chargers it might have played a role in charging times. Surge protector power strips will slow down the amp draw that power strip can process. The other thing to look at here is which charger was plugged in closest to the power source because it will become primary on amp draw. Maybe try two completely separate circuits with no power strips and same size/brand/length 10 gauge Extension cord. I’m only speculating, but maybe I’m not. Wonderful videos, awesome insight and amazing energy! Stay true!

[@rainman5438]

I watch these videos at supercharged speeds, 2x, so I can cram more videos in a given time. Best YT feature yet..

[@jfloydsea]

Just remember that the faster you charge a battery, the fewer cycles you’ll get out of it. For the most longevity, use your slowest battery charger (lowest amps). Only super charge if you really need it quick.

[@andrewcaballero6288]

Damn how do you know this?

[@chicoandthem4n]

@@andrewcaballero6288 this is common knowledge, all batteries work like this.

[@imashbuttons1734]

@@andrewcaballero6288 charging them faster heats them up more

[@truthserum9157]

Your all wrong, it’s heat that destroy’s batteries not how fast, if the charger has a fan then you can increase the the amp rate charge with shorter time.

[@jfloydsea]

@@truthserum9157 chargers have fans to cool their internal components. I’ve never seen a charger that cools the batteries.

[@dantheman9395]

I hope by the time you read this you’ll be at 100k. Congratulations I’m glad you get this kit to get to the bottom of it. 👍👍

[@VCGConstruction]

Thanks Dan the man solderholm we appreciate you!!

[@jerrysmith9935]

There's nobody else that explains or test as spot on as your channel keep up the good work always in real life use then hear say facts always 💯 percent getter done

[@ToolReviewZone]

Awesome, informative Overview bro. Very well done

[@VCGConstruction]

Thanks TRZ we appreciate it!!

[@sklxfrtmuzik6000]

Milwaukee never seem to stop upping the game love this brand so much am like a Milwaukee ambassador on my site all red and black all day best brand ever

[@UnderHisYoke]

Thanks Vince. Always watch your videos before I go buy my next tool for the school district.

[@VCGConstruction]

Thank you for the support Mark!

[@smitty2jones]

I don't have any of the big batteries, and my M12/18 tools are more intermittent-use type tools (like a 3/8" or 1/2" impact), but my 40v lawn tools definitely have to cool before charging. My first cordless lawn tool was a Worx 18v trimmer. It said it'd charge the batteries in like 30 minutes, but... it took an hour for them to cool down. I had 3 batteries just for that trimmer, and by the time I drained battery 3, it would just be finishing the charge on battery 1. I had a little desk fan blowing over the charger to help cool it faster!

[@trolling4dollars816]

I respect Milwaukee tools, especially the corded version. As a business owner, too many batteries and tools walk off the job site. For my business (and for homeowners) Ryobi is the way to go for cost effectiveness. I still have a corded 30 year old Sawzall, and a 25 year old 1/2" corded drill, as well as a 25 year old Bosch jig saw. Buy quality tools if you can keep it from walking away, buy cheap for ones that walk away, or just die early (4.5" grinders). There is a place for quality tools, and for Harbor Freight type tools.

[@dustymanjuiice4445]

this is a terrible piece of advise 🤣.. if you have issues with your tools being stolen then maybe you should rethink your strategies.. telling ppl to buy cheap because of theft is not the way 🤣🤣

[@user-dk9qg9vt2b]

Hello, thank you for interesting reviews tool Milwaukee, it is a pity that new items can not be bought from us in Russia.

[@rvega91722]

yes it does turn on with the m12. I got one from COP Outlet last year

[@TMCX113]

CONGRATS @VCG Construction ON THE 100k! Yall hit it before July 4th, nice work! 🤘🏻 Keep up the great content and here’s to the next 100! 😎👍🏻👍🏻

[@VCGConstruction]

Thank you the minimalist explorer!

[@aaronrepper7649]

Coptool got 58m and 29 seconds, charging the 12.0 on the supercharger. Guess it depends on the temperature of the battery/ room temp. Also if you could run some more test to see if those times are consistent or if they change. Great video

[@VCGConstruction]

That’s probably a good idea!!

[@kingofthecrease30]

Vince is supercharged all the time...milwaukee looked at him and got the idea for it 😂

[@VCGConstruction]

🤣🤣👍🏻

[@TexasBuyer2001]

I think Vince's vest was blinking green during the video at the 20 minute mark. Ha ha ha

[@interceptor0166]

Mind blown. Now I know. Thanks Cousin Vinny.

[@VCGConstruction]

You got it !!

[@thegoodfight365]

Thanks for the info as always 👍🏾

[@matthewdotkom]

Very informative. I appreciate it

[@mjc8761]

Very informative! Super charger looks awesome I will need to get it for my husband 😊

[@VCGConstruction]

Sounds good MJC!

[@kmacnumber2]

MJ C wish my wife would buy me power tools.

[@joseperz27]

I've gone through 3 m18 fuel sawzalls and 2 m18 super hawgs as a plumber I use my tools daily and I found that their electronic components are their weak point because I have the corded versions and haven't had any issues with the corded versions

[@nicksrandomviews1296]

Just started my milwaukee cordless tool addiction yesterday I picked up the 3/8 drive m12 fuel ratchet and it's awesome I wish I had your collection bro but it will come with time lol. Very cool video thanks for the informative video. 👍

[@codyramos3200]

Holidays . Or black Friday , fathers day etc.. best times to invest in Milwaukee tools.

[@draytonPW]

I have an old Black and Decker drill/driver. It has a puny 1.3ah battery. The charger is painfully slow, 4-6 hours for a 1.3ah battery slow. Over 6 years later the 1 battery it came with still works great and still has over 1ah of capacity. My point, if you don't need "Supercharging" stick to standard. Maybe invest in an additional battery instead. Your battery packs will last longer.

[@VCGConstruction]

Thanks Drizzy!!

[@AntonioClaudioMichael]

Great video Vince good information thanks for the battery and charger part numbers

[@VCGConstruction]

Thanks Antonio we appreciate it!

[@ruggiero1371]

I love Milwaukee tools I have over a 100 different Milwaukee tools and they have always performed or should I say out performed what they say it can do I just had Milwaukee at my job site and that is a cool experience

[@AntonioClaudioMichael]

Nice batteries and the new super charger

[@bubonictheory1]

im a up and coming electrician and just spent like around 700$ and im still not even half way with buying all the tools i need... if trying to donate to a great cause that be amazin! thanks and keep coming with the videos!!!

[@irmaztamal21]

11:38 very useful product number explanation. Here in South East Asia the product number sometimes differ from that are advertise.

[@AntonioClaudioMichael]

Keeping the battery cool as a high ampage is going into the battery is key to keep the cells from dying out

[@VCGConstruction]

Yes that is my understanding as well!

[@kalinbanks144]

Congrats on 100K Subscribers guys love your work

[@VCGConstruction]

Thanks Kalin we appreciate it!

[@gagemosley8365]

It would be nice if you did the battery breakdown comparison with pictures, or even the actual battery's. It's nice to be able to visualize

[@DanCurrier]

Congrats on 100k! You are killing it!

[@VCGConstruction]

Thank you Dan we appreciate it!

[@johnholland3476]

My new m18 skilsaw & hammer drill combo out of box charger flashes green / red and won’t charge .it’s the 7 1/4 saw kit

[@makaynchealhalibbealkhooo9673]

Nobody:..... Vince: here’s the deal 😂😂

[@jeffstone7912]

Battery’s have a certain shelf life. I stopped buying cordless tools. With the exception of a drill and I still use corded drill’s. Do you want to charge your batteries as low as possible to preserve the life of the battery. I think the Best strategy for going with battery tools is to have lots of batteries. Charge them at home at a slower rate after work for the next day.

[@LynxStarAuto]

That's what I do.

[@pauliewalnuts2878]

Great vid as always Vince. Congrats on 100K Cuz!

[@VCGConstruction]

Thanks Paulie Paulie Paulie Walnuts, we appreciate it!

[@duaneadams1617]

Well done Vince!,really enjoyed that,good information

[@VCGConstruction]

Thanks Duane !!

[@mattheweustis9506]

Have over 12 m18 batteries I use the 6 way charger and break them down in two groups cycling them on my truck. 4 battery’s are 5 or more years old no issues

[@gtm624]

Now we just have to fight over receptacles and charging areas 😂

[@malan828]

Always thought of getting one of those inverters in my van and leaving a charger plugged in so while im riding around my batteries will charge.

[@amoscardoza5253]

Congratulations on the 100k gentlemen!!! Well done!! #VCG4LIFE!!!! Great vid ,hope they come out with a 4 and 6 port supercharger.

[@meagaindave2049]

Great video and very informative! Thanks, Vince, for making us part of the 1% ers. That's why we ring that bell like it's 1776! May God bless the VCG!!! 😁

[@VCGConstruction]

That’s right thanks again me again!!

[@coppertop1875]

Man…I was about to fork over the $$$ for a super charger specifically for my m12 tools. I appreciate the info given I already have a rapid charger.

[@joejoe6949]

I’m glad to see Milwaukee is sponsoring you brother.

[@sklxfrtmuzik6000]

for real i love everything Milwaukee an this guy takes the stuff i wanna hear favorite channel on KZbin

[@MrSportsphoto]

Great video Vince!

[@michaelc7283]

Hi Vince, It would be nice to see a new version of the milwaukee 10" sliding miter saw. It should have that same style like the new 12" sliding miter saw. I know it's not out yet, but you tried it out at the NPS19. Do you think or anyone else think that the milwaukee 12" should have had two battery slots? Just to have that extra power to run that 12". I still like my corded DeWalt 12" and 10" table saw. I know it's not cordless but on every jobsite i do have power for those stationary items. I have to say i do love my milwaukee m18 sawzall.

[@mcscher2]

Great video, thanks!

[@jasonbourne949]

Looking forward on the arrival of the cordless blow jet as a gearbox rebuilder.

[@tomassoyweyvon4902]

Mui Bueno Vicente'....:).....your channel is Bravo!...happy to have found you!

[@robgarcia4426]

18 min in i realize.... dang hes got the milwakee phone charger cord too haha nice

[@VCGConstruction]

😂😍😍👍

[@joshurmetal420]

Woo baby gotta snag that. This guy went cordless along time ago and this will be nice.

[@Badass_Rooster]

That funny that you mentioned the sizzle sound. I mounted 2 of them tome metal divider wall I my van between the cab and back. Now that sizzle sound is magnified behind my head. I picked my wife up at work and she asked what the noise was.

[@VCGConstruction]

Thanks for sharing your experience

[@zzmalone6720]

Vince, you called it 3 years ago with the High Output label below the 12v receptacle, “Optimized for high output batteries”. 👍🏻😎

[@VCGConstruction]

I have to rewatch this video now… didn’t remember saying that! Thanks ZZ!

[@zzmalone6720]

@@VCGConstruction right around 25 minutes

[@sugargoldy]

Good video Vince I wonder what the longevity is on charging those batteries that fast and do you think they'll ever make a bigger battery than the 12.0

[@davidmoulton5422]

Yet another great informative video thanks Vince

[@VCGConstruction]

Thanks David!!

[@richoverton493]

I would love to see a corded battery option for when all batteries are depleted and you still have work to do. Is anything like this available?

[@kevindaak859]

The blinking green light on the super charger is the cool down period. When the light is solid green it is ready to use.

[@AntonioClaudioMichael]

Love the case with the 3 batteries and the super charger

[@VCGConstruction]

Pretty slick right?

[@AntonioClaudioMichael]

@@VCGConstruction very slick I like looks sweet

[@acespark1]

The biggest problem on any site is theft of you brand new $300 battery and maybe the charger aswell

[@josephmcdonald1257]

Does the one key not track the batteries as well I know they have the little signal symbol on it but does that mean you can track just the battery without the tool

[@Roblecop]

Shot in the dark here, maybe the Supercharger's time was averaged over let's say ten charges to account for any abnormalities. Just a thought lol I do think the fan would turn on for the M12 port. I cant see why it wouldn't lol Great video guys!

[@VCGConstruction]

Maybe Joshua!

[@LaCatHTF]

Thanks for the “inside scoop” at the end. You know I hang around all the way through! 👊🏽

[@musicman692]

I have had an M18 HO 12.0 battery for a few months, but have only charged it once. I got it free from Northern Tool with my kit which included a sawzall, hammer drill, and a 1/4” hex impact driver. The 12.0 battery is too heavy for my taste on any of my hand held tools. It would be great for the table saws. The fan in the new charger is to cool the rectifier and voltage regulator circuit on the inside of the charger. If it helps keep the battery pack cool at all, that would be nice, but my guess is, as an electrical engineer, that would be an unintended consequence.

[@roberte362]

Awesome! Hope y’all have a super charged 4th of July!!!

[@VCGConstruction]

You as well Rob!

[@TacticalMainframe]

Love your insight

[@stephenzies8867]

Thank You

[@VCGConstruction]

Thank you Stephen!

[@jasonrojas2176]

I have a 12amp on my Milwaukee fuel backpack vacuum. Lots of power 🔋

[@Wikisi]

congrats on 100k from down under mate ! cant wait till that hits our shores!

[@VCGConstruction]

Thanks Riki we appreciate it!

[@thegabrielcannon]

Hey Vince! Love the channel, just recently found you guys and have been taking in the videos like crazy. Small business owner in NC. Has there been any talks about dewalt upgrading their 20V 7 1/4 inch chop saw to a brushless motor? Love the idea of the portability, but don’t want to pull the trigger if there are any signs it’ll get an upgrade soon!

[@VCGConstruction]

I’ve not heard anything on that saw !

[@thegabrielcannon]

VCG Construction thanks brother! Keep up the good work!

[@ftlaud911]

For my needs I use the standard charger. Have many rapid chargers, but want to charge at lower amps which will prolong battery life. I have plenty of batteries to do any job so no rush for me. Yet to kill a battery yet.

[@muddybadgers5205]

Vince they have a patent out for HO M12 batteries using 18650 and 21700 cells. I don't see them making it though. It's very hard to keep the voltage balanced when you have different cells in parallel like that

[@nismo4x4n]

not really you can get bms that'll handle a few amps that are smaller than your thumb nail.

[@G__Mason]

I love all my Milwaukee power tools but I still got Dewault’s table and miter saw. I would love to make the switch but I wish they had a cord with the option of using a battery. I’d make the switch today if they would do that

[@whattheheck5083]

Damn! I just bought a new rapid charger now they come out with a super charger! I’m getting tired of being nickel and dimmed. Vince can you run a test with a hot battery? Thanks!

[@mattturner8753]

One Milwaukee commercial after another now

[@VCGConstruction]

Yup, Milwaukee has so many new offerings its hard to make enough videos quick enough to keep up! Enjoy!

[@paulw9732]

Awsome vid vince! The super charger seems pretty cool but for 180$ I rather have another battery maybe 2 more batts and keep my rapid.

[@VCGConstruction]

I won’t disagree, quite frankly I’d like to see this included with two 12AH batteries in the new 12” miter saw kit!

[@paulw9732]

VCG Construction we’ve seen 2 9’s for 180$ u can get 2 6’s right now for 220$ at acme tool I’m sure there’s a ton of other batt deals around 180$

[@LaCatHTF]

Super bad ass Vince!!!

[@bobedwards7927]

Ingenious for Milwaukee. buying new batteried forever instead of a one time corded perchase.

[@monroekunz2070]

I have the 12" compound & the table saw with stands. Wish Milwaukee would have made them with cord option & built in charger like they did my light.

[@gergemall]

Right on

[@markschumacher6630]

Milwaukie has got their shit together. Awesome stuff.

[@tc5102]

@Mark Schumacher ....the CEO of Milwaukee was fired from Dewalt....When he was at Dewalt he was not cherished by the company and Dewalt board did not award him for his accomplishments but fired him.....then came Milwaukee who saw the potential that he could change the fortune of Milwaukee......

[@bsdubois]

Milwaukee will have their shit together when they bring production back to the USA.

[@chuckgrumble5440]

@@bsdubois exactly

[@user-bq2py9tl5l]

Vince very good info, although fast charging rates will lower the amount of recharging cycles and total capacity of amps of each battery. Just buy more batteries and charge them at a slow rate. Rabbit Vs the Turtle.

[@gotjuice7160]

When the light holds to a slower blinking, that is the 'balance check of all the cells in the battery pack. For max life, leave the battery on the charger until you get the solid green.

[@27bahneys]

Hi Vince. Congrats on 100K!! Any word on if Milwaukee will be offering that upgrade kit in the Packout? Would love to see that for about $500 during the holidays

[@kennethkuhlman8864]

So after looking at the Milwaukee chart that shows the charge times for various batteries and chargers, it seems like the super charger must charge the HO 6ah, 8ah and 12ah cells separately. The HO 3.0 doesn’t charge faster from the rapid charger to the super charger but it’s only a single row of cells. So does the super charger charge rows of cells separately which would make sense as to why the charge times are so much lower.

[@syzslakmoe]

That’s a nice battery packout set. (Early) Congrats on hitting 100k!

[@VCGConstruction]

Thanks Dane we appreciate it!!

[@jonnygarland4741]

These are MUCH better tools that any DeWall tool's really last much longer and much more durable and tougher Makita tools really is a great GOOD tool 👍

[@chrisrhudy2000]

I think the difference in promised charge time and actual result is caused by how you had the chargers mounted. I'd like to see you try again with them on a shelf sitting on the included feet.

[@markchidester6239]

My rapid charger charges both at the same time. Love it! Problem is that I'm done with the m12 tools. The #$&@(+/ batteries don't stay in the tools that have vibration such as the multi tool and hackzall. I specifically bought the m12 version of the hackzall over the m18 because it has a shorter stroke. Works great for the tight spaces. Was fine for a while, then the battery lost its grip and vibrates out. Impact tools are ok, for now. Wish they would fix the problem because they worked great before this happened.

[@jmwarden1]

I must have improved M12 batteries because I have a real struggle getting them out of the tool to charge them. I also believe my Rapid Charger will charge both M12 and M18 at the same time.

[@eag8999]

I’ll buy the triple m18 (plus triple m12) rapid charger for the same price.

[@JasonLee-qj8ts]

congratulations on 100k subs!

[@VCGConstruction]

Thanks Jason!

[@johnmccrea8106]

I gave you another like. The info is great news!

[@scottsyverson4260]

Cordless tools are great for certain jobs but I rely on corded tools most of the time. Either way, you still have to get power to a site, be it generator or temp power pole to run your battery chargers and compressors. So there is little extra effort to run heavy duty cords as a branch line to different floors or rooms where you'll be working. Additionally, cordless tool just don't have the continuous torque of a corded tool. Sure they'll do fine for the first half dozen cuts, but then the power starts to draw off.

[@williamabaker12]

I can rip 2x PT over and over and over again with my milwalkee m18 7 1/4 circular saw with a 12 Amp hour battery, and never have a drop in torque. I've got several batteries and the charger charges a dead battery long before I can use one up. Cordless has come so far, they can be used in all but the most intense scenarios. Well, the expensive cordless tools can. Lol

[@baddecisionsoff-roading3243]

Ps. Milwaukee sold me with my first USED 3/8 impact. Older yes. So what? Did a great job. Broke on me, f it I want the high torque 3/8. BEAST of a gun. All the tools have impressed me. Can’t work without them. I’m lazy lol.

[@ar-sithf.austin3744]

Milwaukee Fuel is the best you can get for power, charge time and holding, and overall average length of service for your dollar. You'll generally burn out an Dewalt XR especially with the 60V flex Fuel battery long before the Milwaukee. Even if you don't invest in the FUEL grade Milwaukee stuff all their others are great too. As a person who has worked in industrial maintenance as a Millwright and now on tractor trailers you can't beat them. Their new 1" Impact with the 9 amp battery that hits at an incredible 1850 lbs of nut smashing torque only weighs 10 lbs! Compare that to lugging an air powered Ingersoll Rand 1" impact around and you know what I'm talking about. Busting off 40 nuts on a Kenworth and replacing them in a tire change out on a the rig will wear even the best inshape man down whose pushing over the hill age after 4 out of service jobs plus other work in a regular shift. That's taking off and putting on a total of 320 individual movements with the heavy IR impact. The new Milwaukee will bust nuts off a 40 year old front end loader rusted tight like it isn't shit. There is a video that proves it.

[@allenjackson1371]

good video very informative

[@VCGConstruction]

Thanks Allen!

[@DayRider76]

I'm fully M-cordless now! No strings on me!

[@caps741]

Charge times can change if you use a power strip as well. Not all power strips put out the same power to all ports. If the super charger isn't getting the full power it needs, charge times will increase.

[@AKredhed]

I need one of these. I bought the 12amp and 9amp batteries because at our cabin we only power up the generator when needed and it’s nice to just bring batteries from home and not have to charge them there. However I didn’t even know they made a rapid charger. Can I hurt my larger amp m18s by not using the super or rapid chargers?