VEIKO Ratchet Clamps Are They Worth Your Money? Banggood Tools

VEIKO Ratchet Clamps Are They Worth Your Money? Banggood Tools
In this video I will show you the ratchet clamps from Veiko that you can buy on Banggood. I will go through most common uses for them and I will go show you how they work.
Shopping:
UK Veiko Ratchet Clamps - uk.banggood.co...
USA Veiko Ratchet Clamps - usa.banggood.c...
Bessey Ratchet Clamps on Amazon:
UK - amzn.to/3QTrLer
USA - amzn.to/46aAYU3
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
Shop on Banggood - www.banggood.c...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Web page - www.casualdiy.com
Email - [e-mail]
#banggood #woodworking #ratchetclamps
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

[@whomadethatsaltysoup]

I bought those clamps a couple of years ago, and have had no problems with them. The only difference with the pair I have, apart from being a little cheaper, is that they came without the screw at the top. This made them very frustrating to use, as they would always fall apart when used in my workbench or track. Simple solution: add screw or bolt or even twisted wire. The Festool version is even more expensive! But, hey, does that come as a surprise?

[@dannymurphy1779]

I find with clamps each one is a specialist at some particular job, these ones are great for holding wood in the vertical position via a horizontal rail. They are a great buy at the price.

[@geoffreycoan]

I’ve got a pair of these Veiko clamps and they’re excellent with the MFT. Beware that some of the non-Veiko ones on Banggood don’t come with any plastic bumpers on the clamp face - I had to get a friend to 3D print some for me

[@mickjay2579]

I got some a couple of years ago that came without the plastic bumpers, so I just superglued a rectangle of bike inner tube to the face, still works perfectly.

[@dougwardle2175]

I bought a pair a few months ago and it took me an hour to decide to buy another pair, they’re really good quality

[@CasualDIY]

Yes they are not too bad at all

[@barry.w.christie]

Thanks for another very useful review ... I'll probably get a few of these once I build a workbench that can use them 👍

[@CasualDIY]

They are very handy to have 👍

[@elpresidente8730]

I bought a pair of very very very similar clamps from Amazon for 19.99 They are excellent and the clamping force is more than adequate.

[@idlersdream826]

I've got a pair of these and agree, they're very good value & quality, also, at the time I bought them they shipped from the UK, so arrived quickly 👍

[@johnpenman1548]

Hey, Tomasz, your video on the VEIKO rachet clamps is absolutely spot on! I bought the pair of these clamps over 12 months ago and they have done a fantastic job with my MFT bench. Thanks for the 'outside the box' tip about using the clamps to hold the track firnly in place! I normally use the Makita clamp that came with the track but I will have a go with the VEIKO rachet clamp with the Makita track. Cheers!

[@CasualDIY]

Thank you for watching my video 👍

[@MCsCreations]

Fantastic review, Tomasz! Really great clamps! 😃 Stay safe there with your family! 🖖😊 And happy holidays!

[@CasualDIY]

Yes they are quite decent 👌

[@stevesiefken6432]

Nice review

[@CasualDIY]

Thanks

[@LukaszJeleniewski78]

Zawsze możesz założyć na termokurcza, takiego zwykłego do przewodów.

[@CasualDIY]

Hmm ciekawy pomysł zastanawiam się tylko na ile by to było wytrzymałe 🤔

[@steveprice1620]

You can never have too many clamps 😂

[@CasualDIY]

So true 👍