VELCRO BACKED SHOTGUN CARD INSTALL

[@jeffadams9807]

I Would Change That Stock For The TACTALOAD FLASH 5 Stock, It Hold's 5 Extra Rds In The Stock, That Reload's From The Bottom, Great Video...

[@TerriblyTactical]

I have one of those on a mav 88

[@toxicslix]

I"m going to trim my piece down a little and maybe add a punch hole for the pin removal on my 870. I'm also going to try this for my Double Defence, but I'm going to stick it to the stock...I live in Canada where our Gov't sort of frowns upon the use of firearms for "self defence", so mine will be for ...animal protection :-)

[@mikea8998]

Yeah its sad isnt it.

[@OGbqze]

Illinois not only frowns upon, but also put into law that the people must register. And the people simply said "FUCK YOU". Keep complying and you'll soon be watching the young growing up as slaves.

[@michaelshanahan4965]

@@toxicslix Sounds more EVIL than sad.

[@sluggou812beotch]

I bought 6 round cards on Temu for $1.28 apiece. They came without sticky backing but Temu had a roll of hook with sticky for another couple bucks. The cards have held up so far. I bought so many I don't care if they only last a year.

[@sluggou812beotch]

You said "Giggity."😂

[@TerriblyTactical]

@@sluggou812beotch lol I did

[@TerriblyTactical]

Hahah I guess so

[@ohroonoko]

Give it 3 hours for the adhesive to dry before tearing at it.

[@marcodellacqua15]

I would take a little additional time to punch a hole in the velcro for that pin. taking down the shotgun will be a PITA otherwise.

[@charlesmatthews9645]

Good idea

[@benjaminfunk8826]

Thanks for making the video! I watched this while throwing an SOE card on my Shockwave. I'm a recent SOE convert!

[@TerriblyTactical]

Awesome! Welcome to the fold!

[@lmglocks]

I always add a piece of valcro to my shot gun receivers and use those SKD shot gun cards they wrk well in my opinion as well !!

[@MrSlickPulla]

No problem brother anytime, that's what it's all about. Hey I got you some patches from the 511 grand opening ( Military Arms and Freedom Big Bore). Gonna be in the area next week I got you.

[@TerriblyTactical]

Niceeeee! U da man bro

[@ian5780]

When you said giggity that shit cracked me up

[@TerriblyTactical]

Lol glad I could get a chuckle

[@zabrak0069]

I have a TacStar sidesaddle on my 870. Took the shell holder and left the plate mounted. Put the velcro on the plate and no mess on your receiver. I have 500+ through my shotty with no issues. I have cards in black, coyote tan and od green to color code my loads.

[@TerriblyTactical]

Niceeeee

[@dennisgraham3087]

I just added the ESSTAC Card. But used a velcro backing ( industrial Strength from Lowes) and I like how it looks and feels. My ESSTAC is a 5 round. But I plan on buying a 7 round in the coming weeks.

[@TerriblyTactical]

Nice! I've heard good things about those and will probably grab some myself

[@anthonyclaudio1189]

Good vid sir. I also use a Velcro system.

[@TerriblyTactical]

Thanks for watching and yeah I think it's the best way to run it!

[@deu_rottweiler9069]

Do you ever get Problems with this ? Like that the velcro get of because of heat or something ?

[@TerriblyTactical]

Nope, haven't yet!

[@deu_rottweiler9069]

@@TerriblyTactical Thanks

[@TerriblyTactical]

@@deu_rottweiler9069 no problem!

[@thetobaccoguy1751]

How easy is it to remove the sticky pad at some point if wanted? I ask as I have a Benelli M4, and yes, I am a poor and she's my baby. Don't want to have sticky goo all over the receiver if I decide to remove it.

[@TerriblyTactical]

Lil bit of goof off on there and you'll be right as rain

[@Qsaws_]

Simple and informative

[@TerriblyTactical]

Thanks!

[@madbiker_]

I like that μολών λαβέ on your wrist... greetings from Greece

[@TerriblyTactical]

😎

[@JamalGood-l1r]

I use 2 pieces of wood and a clamp to make sure it’s all adhering tightly

[@TerriblyTactical]

Solid idea

[@M8trix.]

Nice video my friend. Is there any issue with those small screws where you stick it on? I ordered my first shotgun, I guess you don’t need to reach out to those screws. Good job!

[@pault.mccain6637]

Thanks for this video, helpful.

[@tacticalbt1023]

What did u use again to make it stick what is it? Sorry missed it great vid man

[@TerriblyTactical]

It's velcro tape with adhesive backing

[@gentrydebbie1040]

I cannot keep My Beretta 1301 Fed It shoots so fast i cant keep shells in it . But it is so fast .

[@TerriblyTactical]

More of a benelli m4 guy myself

[@pravoslavn]

Huuummmmm.. I think I would trim my Velcro to size before peeling off the backing and sticking it on !

[@TerriblyTactical]

We got it done!

[@Milkman3572000]

I thought the speed feed stock was un available for the 590? They are da bomb.

[@TerriblyTactical]

They definitely are!

[@abdullaex4119]

Good vid. My question is how good is the adhesive to hold the velcro to the receiver? I have dealt with these types of setups. I have also seen folks pulling the shell holder and the piece attached to the receiver peels right off. Even cleaned with Alcohol. Not good.

[@TerriblyTactical]

I've never had any issues with my setup

[@rickcap1271]

What you need to do is on Amazon you order the industrial strength Velcro it’s the Velcro that holds up to 10 pounds and you get it in a long 4‘ x 2“ strip and you just cut the length of the piece of Velcro you need use the rubbing alcohol on the receiver to take out any dirt or oil and then cut it to the length you want and trim it so it doesn’t hang over the shotgun and then put the card on it with the shells and it will look good and be functional and will not give you any problems

[@pjbarney9580]

cool ideas... I made my own shotgun ammo cards out of an old bandolier... made 5 of them for the price of less than an hour of my life

[@TerriblyTactical]

Niceeeeee

[@Starone7099]

Does this Velcro set up interfere with taking the gun apart for a Good cleaning ?

[@TerriblyTactical]

It is easily removed and reinstalled with a fresh strip when you need to do a real deep clean. That being said, you can clean and lubricate it just fine without punching the pins.

[@gentrydebbie1040]

It is so much easier if you leave the shells & Card stuck then remove paper stick whole Thing on so easy Then gently Revove the card & Shells .

[@TerriblyTactical]

I've found my method works well but to each their own indeed

[@_elvis666_5]

Hi! Any rust issues on a rem 870 receiver under that velcro? I'm going to upgrade my 870 with a velcro side saddle.. just wanted to know:) greetings from germany!

[@TerriblyTactical]

Idk have only ever done it with a mossberg

[@_elvis666_5]

Terribly Tactical ah okay..but thx for your answer:)

[@Christ-1]

The 6 pack fits nice

[@TerriblyTactical]

Yeah it does

[@donaldduck4867]

Gigidy! Hilarious!

[@TerriblyTactical]

Lol

[@kenman200]

Thanks, but the whole reason why I watched the video was to see how you trim cut the Velcro bro.

[@TerriblyTactical]

Stick it to the backside of the caddy and cut it...

[@paulferrari3921]

If you heat up the receiver does the glue let go?

[@TerriblyTactical]

Good question and no however I've never gotten the reciever super hot to begin with even after firing A LOT of shells. It's not anything youd have to worry about.

[@paulferrari3921]

Terribly Tactical yah, I suppose it’s the barrel which heats up more than anything. 👍

[@jamiepotter9711]

How has this held up over the years?

[@TerriblyTactical]

It's never come off and the velcro is still sticky!

[@PuffmanEazy1]

Any damage to the finish with the adhesive?

[@TerriblyTactical]

Nope! None at all!

[@damediggem]

Does the velcro hold while shooting?

[@TerriblyTactical]

Sure does!

[@ranmangolf]

Any suggest brands for 20 gauge shotgun?

[@TerriblyTactical]

Mossberg 500 or 590 for pumps and basically anything benelli for a semiautomatic scatter gun

[@Skipro]

I’ve had a bunch of shotguns, Bennelli is the best!

[@TerriblyTactical]

@@Skipro amen to that

[@theimpaler2317]

Can you use the pump with that Velcro on there? Because it looks like it gets in the way!

[@TerriblyTactical]

Of course you can use the pump. The side saddle clears it no problem.

[@theimpaler2317]

@@TerriblyTactical oh ok right on! Just couldn’t tell!

[@philisacoolguy1]

have you taken it off since you posted this video? does the sticky part lift up some paint with it?

[@TerriblyTactical]

Have never taken it off no

[@Skipro]

So I’ve had these for years and due to heat the Velcro came off

[@TerriblyTactical]

Yeah I can see it. I've never had an issue but it's definitely possible. That being said, it's a rather quick and easy fix!

[@Skipro]

@@TerriblyTactical I’m wondering if it would be possible to use some type of plastic like Magpul makes and adhere velcro to it and then have that part screwed onto the shotgun like a traditional shell carrier for increased reliability.

[@TerriblyTactical]

@@Skipro I don't want to start messing with torturing pins on the gun because that will cause even worse reliability issues in my opinion.

[@Skipro]

@@TerriblyTactical great point I did install one of those Mesa tactical carriers back in the day and was super happy when I found these shotgun cards.

[@Christ-1]

Covered up receiver pins?

[@TerriblyTactical]

And?

[@tipsovr2626]

He he he.... He said "rub it out".

[@TerriblyTactical]

Lol sure did

[@obese7799]

Yes rub it out. Almost there

[@AE1OU]

What shotgun model is that?

[@TerriblyTactical]

Mossberg 590 special purpose

[@baselstein]

Dose a magnet got any effect on shells or shotgun?

[@philrachal1300]

Seen in another video that some receivers are aluminum.

[@jeffreyehlers1605]

where can I get these shotgun velcro cards?

[@TerriblyTactical]

www.soetacticalgear.com

[@nottelling9621]

i don't recommend using velcro, after several shots, the shock loosens a full side saddle, and they fall off. i now have several I don't use, i can't give them away...

[@TerriblyTactical]

@@nottelling9621 I've used these for years and have several thousand rounds through them and never had a single issue

[@Skilpadjie1]

Why not cut the female velcro to size before just sticking it onto shotgun

[@agvulpine]

0:24 All these links in the description... not a single link to the product in the video. Greeeaaat...

[@TerriblyTactical]

Google is hard huh

[@TerriblyTactical]

Also fuck head yt would take my channel down because linking to gun accessories on yt is against policy and could get me banned

[@agvulpine]

@@TerriblyTactical And you wonder why your channel is so tiny.

[@timon0x31]

Too bad someone doesn’t make some die cut ones for the different shotguns that leave the serial number and pins exposed.

[@TacticalScales]

The piece that is affixed to the gun is cut to size by you, so you could easily trim or cut it to fit around your pins and serial number, then just pull the card off when you need.

[@D5quared91]

Tactical Scales no dip dumfuq, he’s saying he wishes someone ALREADY MADE ones like that

[@perrycooper2260]

Great content too

[@LocoListo408]

Giggidy

[@TerriblyTactical]

Lol giggity indeed

[@bdm3056]

Gigidy lmao

[@TerriblyTactical]

Lol

[@Coruja-DF]

I think gluing things in your gun is not ideal...

[@TerriblyTactical]

@@Coruja-DF you clearly don't understand how this works

[@Coruja-DF]

@@TerriblyTactical I clearly do. I read you wrote a comment about one can "probably" remove it by rubbing some chemicals. But I am also watching and reading people regretting doing so. So, your choice... I still think using the gun screws (if exist) or some tactical rail would be less permanent.

[@TerriblyTactical]

@Coruja-DF do as you please but don't be mad when your bolt on side saddle causes reliability issues.

[@Coruja-DF]

@@TerriblyTactical You didn't understand me, man. If you don't already have screws for it in your gun, you would be crazy to drill a hole by yourself. Mine already came with two - Mossberg 590-based.

[@TerriblyTactical]

@@Coruja-DF no dude, you still don't get it lol

[@bigslimmdawg1979]

This man said gigidy

[@TerriblyTactical]

Sure did lol

[@stripervince1]

It's just a piece of velcro, it's not rocket science. Hahaha the Versace of velcro... Good one

[@TerriblyTactical]

Youd be surprised

[@perrycooper2260]

Ammo

[@eddy-fw7hv]

Ew

[@TerriblyTactical]

What's gross

[@davidblancas8729]

Talk lot less and just do it.

[@TerriblyTactical]

Why don't you start a channel and do everything perfect for everyone and have no personality and show us how it's done buster

[@michaelshanahan4965]

Amazon 6, 7 round shotgun cards, clobri brand $14.00. Comes with Velcro on all 6 cards.

[@TerriblyTactical]

That stuff won't hold up over time

[@michaelshanahan4965]

@@TerriblyTactical Probably right at that price point. I ordered shotgun cards from Grim Tactical but it took about 6 weeks to get them (great quality). So I had the Clobri ones to train with in the meantime. It’s a great way to reload and I’m setting up a belt with Pmag holders to practice with. The 7 shot cards are the same measurements as a 30 round Pmag. I have a Winchester Defender 7 + 1. So the 7 round cards give me pretty much a full reload.