Ventrac destroys giant weeds - Extended

[@ventrac]

@bobcat101100 Ventrac is available in both gas and diesel models. The tractor featured in this clip has a 31hp liquid cooled turbo diesel engine in it.

[@NietJeffrey]

"I can't even walk through it" *stands in the middle of the field*

[@brandonknight7240]

Lmao

[@kennypowers17]

Cmon man. He’s gotta eat too man.

[@wesleythompson7]

😆😆

[@russellingram7876]

I love these machines and all there attachments. The large mower deck with vacuum and rear dump is just awesome... But again the attachments are just awesome...

[@ventrac]

Thanks, Russell!!! You're awesome!

[@XtrAMassivE]

great machine, sure saves hell of a lot of hard work and back pain, I really enjoy watching such videos, great job!

[@jerrygarner8115]

Super nice mowing machine,but,what do you do if you run over a huge wasp nest? Get stung?

[@furgulley8077]

because everyone has 2 ventracs for when you need to do a little yard work.....

[@AgentSmith911]

jason shuler used ones aren't that expensive

[@susanskene2488]

jason shuler nice one

I've been landscaping 15 years and have to say this is quite impressive. It's very similar to the Steiner mower we have, but no longer use. It's multi-functional and very diverse and agile. Some of the slopes we deal with are very steep with plateaus and can only be cut side to side so the angle get pretty hairy. The Steiners are out of service, so I have to use a Husqvarna that doesn't have the same wide stability. It's nerve-wracking to say the least when the tires begin to come up off the ground or when you start sliding down a hill due to insufficient traction. Any moisture whatsoever and you're going for a ride. I'll have to run this machine by the boss to see what he thinks. Thank you for posting.

[@ventrac]

Definitely demo one. You won't be disappointed!

@@ventrac I mentioned it to my boss and he said he's already familiar because he owns the Steiner. I didn't realize this is a Steiner offshoot. I've used the Steiner and it's an excellent mower.

[@steiger256]

Im from Ohio where Steiner is from. Been around them for years, love them. Used 420s and 430s. Great machines, But Ventrac is the old school Steiner brothers new machine. The sold Steiner in 90s and now are Ventrac. Love the 430 Max, but if I were to buy one today I would get the Ventrac 4500 over the Steiner 440. I love Steiner attachments but the 440 is half the machine of the Ventrac, sorry Steiner but the 440 not impressed, should have done more field testing and feedback. Bothe Ventrac or Steiner need to listen to there customers And produse A 430 size tractor. We all dont on golf corses and want A affordabe nimble tractor for home use, just throwing that out there.

[@Sebastian_George]

We also have a Ventrac with brushwood cutter at my job and it really is a SUPER good machine.

[@thomaspigg306]

If I could afford it, I'd most defiantly put it to work. It looks like it'd be a great machine to have if the need and finance permits.

[@jrbr549]

Is Denver related to the founders' family? With the amount of equipment he owns I'm going to say yes.

[@ventrac]

@Bigmanghs03 Yes it is.

[@tf7274]

We can push 2 round bales of straw with ours on smooth concrete. Had one since 1993 when they were called Steiner...now we have 2 of these. Indestructible and smooth.

[@Mianhuaquan]

Nice video man nice property you have there cheers from Australia

[@denversteiner3044]

Thanks!

[@Rick_Foley]

I'll bet Denver seeds the hill with weeds just so he can terminate them from the face of the earth later.

[@mariapetfooleddvd4472]

Professional graded (commercial) machine ideal for commercial premises. Life-time investment machine.

[@ventrac]

We agree!

[@JohnDiMartino]

Thank you, I have the 4231G and it does the same thing with the 6 foot deck when I cut a path thru my field every few weeks.. I was worried it was the clutch but I don't think it is.. The electric clutch is very beefy on the Ventrac. My B38 and B45 are in great shape as is the B180 on the deck..

[@mansharker8]

Can the Ventrac run on B100 without problems or issues? As long as its properly filtered and free of soaps from Processing? Im curious.

[@JohnDiMartino]

At 3:25 and agin at 4:27,you can hear the blades stall,but not the engine,since there is no slipper clutch ,do you know what's slipping,a belt or the expensive electric clutch?

[@danbskyguy]

Belt

[@noelmorrison]

Wow this is amazing, if I had the money and the property I would do this especially because of how steep of hills it can go up

[@JoshuaBellas]

Think of all the little chopped up creatures that were in that brush !

[@henryh.489]

Really just an unfortunate byproduct of the process. Mowing down brush isn’t at all bad for the environment as a whole though, just kinda changes it into something different.

[@ad356]

that thing is a beast, is that the model powered by the kubota D902

[@francisngannouhaircut2616]

Nice!! This is soo satisfying

[@ventrac]

Thank you! We agree!

[@samhardiman1019]

That’s a very committed infomercial!

[@LayzeeGiant]

Works nice but costs more then my JD 790 with six attachments.

[@andyd9199]

Probably turned it into a huge pot grow operation

[@tubhair]

Defoliating a Victory Garden sure works up an appetite!

[@underdogsciontc]

How much does the ventrac run for

[@FredPalmerJr1]

What is your fuel range ?? For case by case of what you're doing.??

[@12vLife]

I have a vacant lot in South Central Florida that has never been mowed. There are pines and oaks I don't want to remove, but otherwise I have this kind of overgrowth. The lot is 75w x 120d, but I just want to cut an 8 foot path to 50x50 patch in the back. What could someone charge for work like this kind of work?

[@kostaleotta8854]

Were does all the grass clippings go cause at the back of the mower there no grass clippings

[@isabelsolorzano5832]

is that weed plants

[@achilles6312]

@unclepain199 i believe the tractor is 17,000 and 3,000 for the mower attachment. Thats what i was told at the MGIA show.

[@Rosethatwantstomove]

what happened to all the grass cuttings? didn't see any

[@waletmerah5413]

Is this product available in Indonesia? Indonesia has many large plantations.

[@michaelxu7132]

Can’t find where to Buy. How mush it’s cost?

[@johnmoore8016]

h ow man6y passes did you make over it? nice job the machine did

[@MikeL-vu7jo]

What an awesome machine !

[@hazelwood55]

When you go into these high weeds and brush, what happens when you hit a rock/stump or piece of discarded metal?

[@ventrac]

The blade will usually just skip off of the object. If the rock, metal, etc. is big enough it can stop the blade in which case one of the drive belts will slip to help prevent damage of more expensive components like spindles. If this happens, immediately hit the PTO switch, and back away from the obstruction before any further damage is caused. Then, turn the machine off and inspect the deck for damage to make sure it is still operational before proceeding.

[@ernestlmorellsr]

...Man I love watching this stuff, know what I am saying? the grass in my backyard is about this high___. . . watching this machine give me the mind set of it being this high^^^^^✓✓✓✓yeah I know, dreaming Lolo...

[@softwarebro]

Why is this so satisfying

[@brenthill5596]

Ventrac is cute but I need a serious machine such as Terex-ASV PT-100 Forestry with ASV Mulcher, by Fecon

[@nickferderer2585]

Why a Terex get a bobcat skid steer and you can get any attachment you would ever need for around $40,000 when a Terex is about $60,000

[@brenthill5596]

Because I already have a Bobcat skid steer. I'm getting a Terex next for the collection.

[@nickferderer2585]

+Brent Hill ok

[@Andrebooker58761]

Terence adv pt-100

[@aarons5259]

Brent Hill good luck terex skid steers suck ass.

[@williamtemple4331]

I want to know about the music for this video

[@jackpreslin4134]

Is ventrac ever gonna make a zero turn mower or tractor

[@yourmedicalupdatepodcast7256]

How much would it cost to cut all that Grass

[@jimlisterman2138]

Great Video ! LUV to have Ventrac to handle my 30 degree slope back yard.

[@bookeruzzell6213]

I thought you guys DIDN'T have a TURBO-DIESEL,only now you just have a diesel and no turbo,please explain!

[@ventrac]

We used to have one available but had to abandon that model for emissions reasons. Now our diesel is a non-turbo engine.

[@bookeruzzell6213]

@@ventrac OK,now I understand!Damn government wants regulate everything!OK,again I thank you!

[@ventrac]

@@bookeruzzell6213 Sure thing! Yeah, we wish we still had the turbo too!

[@shane_williams-k1o]

A 7:00 minute commercial for Ventrac mower. We just use a bush hog. It’ll get small trees and everything else that it runs over. A 15 foot bush hog would have that whole field done in no time

[@ylwpyro9549]

Is Denver Steiner related to the Steiner brothers, who started Venture Products inc.?

[@yogeshprasad5275]

Sir I need a same kind of equipment but I prefer a manual one because my land is on the Himalayas, where the surface is sloppy and very uneven. So the machine can't be driven, instead it has to be operated manually.

[@yogeshprasad5275]

With a hope that you will reply to it ASAP Thanks.

[@amandakey2419]

I would cut it more than twice so the kids could enjoy the space more and snakes would be less of a problem.

[@Bluewatertravler]

. Is the drive system hydrostatic?

[@RudeMcNasty]

At $27,000 it should have AC for that price.

[@wildbill23c]

For that price I'll buy a real tractor.

[@BeingMe23]

Its does have AC = "All Cut"

[@ohUredneck]

Does this mower use fixed blades or 'slinging' blades (like you would find on brush-hog)?

[@ventrac]

It uses 3 fixed rotary blades.

[@ohUredneck]

10-4

[@2233golf2]

The lady,I dream about tonight is called mss ventrac..... :-) Great tractor!

[@bigslimsanantoniotx6483]

How much is that rig it looks like a beast

[@wasu1532]

Can u save some of the weed I need to smoke some after.

[@mro4440]

Makes my eyes itch just watching the video.

[@emperoy8]

Can Ventrack be used for plowing?

[@Gmoney818]

Yes! Even extremely tough snow and dirt is no problem

[@emperoy8]

I meant Plowing the ground like a Tractor

[@pog7052]

+emperoy8 ok in that case yes it also can

[@BeingMe23]

emperoy8 I saw a 3 point hitch 🤔

[@kelsimmons5594]

How long have you had the ventrac

[@1voiceofstl]

What happens to the tons of debrie(mulch) left over?

[@denversteiner3044]

It gets chopped up fine enough that it almost "disappears". It's amazing!

[@WestCoastMan8]

my toro push mower would dominate that hill side with ease, no doubt.

[@iWrestleXuSubmit]

WestCoastMan8 agreed have one too

[@NeoMK]

Fo sho my orange Husky self propelled would dominate your Toros...

[@toyotacruzer7543]

Bull crap

[@manvinderlall6238]

WestCoastMan8 nj

[@anjafrosthelt5979]

WestCoastMan8 Hej Gro er jo Cao kor og lastbiler og gravko og where can I see yeahffvs rhujA112. ,I said stop by the hydrant can I change your does your name

[@Wayoutthere]

I appreciate the design of this and what it can do, but most of the time I fail to see the actual reason for cutting brush like that. Unless you are >using< the cleared out land for crops, animal pasture etc, I get it. Even if it's just for promoting the growth of endangered species plants that require a poorer soil (mow & collect). But al that often happens is mowing several times a year, and leave the mulch to be reabsorbed. If I wasn't using parts of my land, I'd just leave it for the birds and other animals, or mow perhaps once a year and collect the cuttings.

[@patriciasheckells9295]

yufg g dggudhddujruxbdirnr to 23123456789010 0

[@4x4rednecks71]

he said he wanted to use it for his kids to play in it and I was like wtf dude. There's still gonna be peices of brier and shit in there. them kids gonna get hurt

[@qazwsxedcrfvtgbyhnujmikolp7851]

I mow areas that are full of brush before it gets big so I don't have to use a chainsaw

[@mikel9567]

Well for starters your not helping anything by leaving it. The overgrowth can choke out other plants, prevent germination, promote invasive species and deter wildlife in addition to being an eyesore and creating a substantial fire risk. Attitudes like yours and other environmentalists have caused more hard to our environment than good. Our environment was designed to be used and enjoyed not left to grow unchecked. But what do I know, I only see the effects of the environmentalists every year when I go up to the wildfires.

[@mikel9567]

You realize that if you let brush become overgrown, it can choke out other plant life and prevent wildlife from coming into the area. Tired of all the people who bash on brush cutting, the simple truth is "environmentalists" have caused more harm than good.

[@igotajopamerica3040]

WHAT IS THE PRICE FOR ONE?

[@catherinemills1994]

Where can I rent one, I am in Smithville, TX

[@ventrac]

C&M Golf and Grounds in San Antonio or Jacobsen Houston are your two closest dealers.

[@roriepoff7997]

Catherine Mills

[@modelfarmer7511]

Ventrac yo

[@calebd512]

cool I'm in smithville too, this would be perfect to make a path to the back pond

[@Adam-uo7lh]

He should have a Steiner since it's his last name 😂😂😂

[@AdamS_27]

Adam, the reason why is because both Steiner and Ventrac are made by the same person

[@jordanolson3769]

Satisfy level over 9000

[@parchannel7999]

I need that machine, would you send me a brochure, tks.

[@Aaron-tk7wh]

parasman pasaribu Here is the brochure for the ventrac tractor. www.ventrac.com/contact/catalog

[@hannahinhawaii9607]

Can I borrow that real quick?

[@sandeepmathews2349]

I am from India..... We dont have equipments like this here.... Where does all the cut weeds go.... Are they shredded and collected in the mover and then dumped somewhere else.....

[@ventrac]

The weeds are mulched up by the mower and returned to the ground. Once they're shredded, they take up very little space and can be left just like you see in the video to degrade and return the nutrients back to the soil.

[@sandeepmathews2349]

@@ventrac 👍

[@mak6371]

Where can I get one in Canada?

[@ventrac]

Check out our dealer locator! www.ventrac.com/dealers

[@50_cal56]

When the cops hear that you have a weed field..

[@rauman]

great , thumbs up Rauman

[@sylviagilchrist1858]

Why let it get that high, in the first place?

[@tom-lz8ll]

i do like this machine its nice but ill bet the price is north of 25,000 dollars?

[@ventrac]

For the setup in this video, yes.

[@clawhammer704]

That's yards gone wild for more than twice a year...

[@eddiehauenstein1201]

So who owns who? This is essentially the same machine as a Steiner that has been around for years. Does Ventrac own Steiner or does Steiner own Ventrac. Or did Steiner's patent run out so Ventrac copied their design?

[@ventrac]

Neither. We are completely separate companies, with no affiliation to each other. Steiner was just acquired by Doosan of Korea. As far as patents go, it's actually the other way around.... There are patented things about our machines that are advantages and can not be copied.

[@eddiehauenstein1201]

@@ventrac look at the attachments from Steiner, The loader bucket, the blower attachment, the trencher, as well as a lot of the things about the tractor itself. It sure seems as though somebody is being copied.

[@ventrac]

@@eddiehauenstein1201 Yeah, that's totally understandable. Think of it like a truck or car from two different brands. They're basically identical.....except totally different. Conceptually, the Ventrac 4500 and the Steiner 450 are quite similar, but nearly every part of the machine and the execution are completely different. If you look at our attachment lineup, we have a more extensive range and we have some attachments that they don't. We also both have other machines in our product range that the other doesn't. The trenchers, blades, loaders, etc. all look similar because the trenchers, blades, loaders, etc. look similar from all companies that sell them in this size class. We're just friendly competitors - that's it :) . Also, if you're interested in the History at all, Ventrac has been around since 1996 - so we're over 20 years old. And we've been located in Ohio the entire time.

[@eddiehauenstein1201]

@@ventrac EXCEPT a truck or a car from 2 different brands i promise are not going to have totally interchangeable parts the way i guarantee that the Steiner and your mower have, probably the exact same engines, hydrostat units and everything arent they

[@ventrac]

@@eddiehauenstein1201Some of the engines are the same, some are different. The hydraulic systems are completely different. Here's a challenge - If you can build a Steiner out of Ventrac parts, I'll buy all the parts and give them to you for free. -Aaron

[@TheCamaro5]

Most people with land have a Tractor with bush hog.

[@robertdavis5133]

Agreed, like I have. Much more powerful too. But the tractor can't go anywhere near as many places as this can.

[@TheCamaro5]

I disagree a small garden 4wd tractor with bush hog or even a finishing mower would do the same and you would be able to attach multiple implements to it when not mowing. This is the reason there is tons of tractors out there and not tons of Ventrac dealers.

[@jwhitley101whitleyfarms9]

@@robertdavis5133 I can go up everything they did on our smallest two wheel drive tractor with a bushog on the back we live in tn and have mostly four wheel drive tractors but this easy stuff here but I'm sure it could do more

[@JACKnJESUS]

For about the same money....just buy a small tractor.

[@scorpion9o9o50]

yea but this is more portable and is easier to ascess

[@bluefalcon1952]

How about for less money.

[@ad356]

i have a kubota BX2350 that i love. it could cut allot of what he cut, but i would never take it on such extreme hills. the way this thing articulates also helps with the terrain.

[@TheGrecco123]

Good job!

[@dirkjenmn]

can i buy ventrac to in holland?

[@garykrutsinger1651]

nice video simply shows it at work

[@maximeproulx5378]

[@unclepain199]

how much do one of this run to?

[@andirysimonov2517]

unclepain199 зщука

[@usnva5638]

If this engine is a 2 cylinder gasoline then it seriously needs to be upgraded to a 4 cylinder diesel. This would nearly triple the HP and torque, thus eliminating any bog down.

[@Foxtucky]

Don't even want to know how much it costs

[@dirkjenmn]

can i buy one in holland?

[@jackshepard8070]

My 31 hp Ventrac chokes on tall grass (using tough cut); a shaft driven machine or a sickle mower would be better. "..raising the deck a little bit" will destroy the belt. The tough cut attachment tends to lay the tall grass over as much as cut it. Just to keep it real.

[@jeffdean755]

I prefer the before, fortunately it'll grow back but shame about all the spiders and insects that were murdered!

[@jimmyalisna7782]

How can i get one

[@ryangiffel2136]

It’s like a combine

[@jonathandexter135]

Where can I get a Free one?

[@ventrac]

People tell us they have been asking Santa....maybe you need to do the same. :)

[@Daav_97]

I'm here only because weed

[@pvt.pudding5319]

My day has been made

[@papaulingshop]

hahaha

[@MistressOP]

got an electric one?

[@ventrac]

We do not currently have any electric powered machines. Thanks for checking in!

[@gatorflight74]

I prefer to rent something like this for the weekend then maintain it with my regular mower. No need for the additional expense of owning one.

[@ventrac]

It does make an excellent rental.

[@rkwill100]

I would be happy to have one for mowing the local airport.. However, the price is way out of my budget

[@ckryegrass11]

LOL!!! Go to 3:24 and you can hear it squealing as its bogging down right while he says the weeds are 6 foot and they cut away real quick!!! Haha. Still a nice machine tho. If its more than $5000 dollars for just the tractor then you should just get an actual tractor.

[@jefferyschirm4103]

You forget to say that you put fun facter back in work.

[@Zoetropeification]

Where in Ohio are these made?

[@mrcavalier3370]

Zoetropeification Ashtabula County

[@TheDarknessOfGames]

Yep those were weeds alright... medical marijuana weeds

[@hshsgjakanss]

You are the kind of guy that tries to smoke oregano...

[@muchlis7298]

Can you send to jakarta indonesia? Sory my english bad