Vertical smoker build

Upright vertical smoker 24"/24", 42" tall, for orders email [e-mail]

[@richsellskc]

you are a very skilled craftsman. thank you for your effort. you seem to be working smarter, not harder. that is what we do. God bless.

[@42Fab]

Good to see the torch skills translated over the Plasma just fine. Cool Build

[@georgewilliams6328]

Does the firebox have to be a certain size on a vertical smoker for correct draft?

[@goofsaddggkle7351]

Still my favorite design of your smokers.

[@mrantone916]

Wow! Now thats a smoker, great build. 👍

[@Its_a_tough_life]

I would love to see more detail on how you did the diverted plate. I’m in Australia and want to build one of these. I have watched almost every one of your videos to get as much information as I can and enjoyed them all Keep them coming

[@daveharrison4064]

Awesome vertical Allen. Cant wait for my reverse flow you're building me!!

[@berryhillbbq3977]

Looks great. Your work is stellar. The valve is probably for a PID temperature controller fan set up.

[@garymccraw1466]

Wow Allen awesome looking Smoker

[@ntj030885]

I can’t wait to see you in a shop one day. I myself want a bigger shop. I’m like you and have to move stuff around all the time to run from the rain.

[@zeroninejames9507]

Getting crafty on your door frame. Like it, all 1 piece. Folding shelf. Nice.👍

[@rodneyyazzie3739]

Nice work brother, keep up the great work and videos. Their's a lot I vahe learned from you.

[@kennymysak2079]

Another great build your customer should be very happy with it. Keep your the great videos

[@bigde9052]

Man I've seen several of your videos your are good at what you do. I wish you were here in the Atlanta area I would definitely be one of your customer's. Great job!

[@HeavyMetalBarBQue]

Who needs a Burn Table!?!?!? Awesome steady hand and skills is all one needs!!!! Metal On My Friend! \m/

[@michaelmcguire19]

Just wanted to say thanks Allen for the video you and I think quite a like cause on my build, I was not sure how I would was going to make the Damper or air intake on my fire box, the slide was what I had in mind wasn't exact on how to do it my smoker is a reverse flow made out of 3/16 plate with main chamber 48 in across by 36 in deep octagon shape and a 20 by 20 cubed Firebox with a 20 x 20 by 48 inch upright centered on the back side of main chamber it will be mounted on a trailer when I'm done I might later add a propane log Berner really enjoy your videos keep them coming brother

[@brownstonecustomcabinetry5309]

You nice with that cutter! Good work!

[@Mziamit]

Awesome work and thanks for showcasing your craft/skills.

[@JAY-CRA]

Glad to see you back. I enjoy watching you make grills and I committed about a smoker build

[@lazypwelding7176]

Hey Allen, I see your using your plasma more and more! If you want to save your hole saw some ware and tare, run your hole saw down just enough to scribe a nice circle then switch over to your plasma cutter. Saves on cutters and your time.

[@98stacy]

On 1\4 in. Plate I usually use a hole saw just enough to make a groove, then cut the hole with the plasma cutter

[@mikeg7843]

That plasma cuts like butter! Saves a lot of time too I’m sure. Was wondering if you was going to get one. It’ll pay for itself in no time from not having to use as much gas. It would be really cool if you could get some temperature gauges with your logo in them. That’d be 🔥

[@dontblameme6328]

Very nice. Mad skills. Thank you very much for taking the time to make and share the videos Hoping your business continues to flourish. Best wishes to you and your family for the holidays!

[@nightflight41]

Man I am down here in. Ft. Lauderdale Fla. Just loveing what you are doing. Got to have one of those smokers. Please keep up the good work.

[@sergioramirez3328]

That is some beautiful work there its aot cleaner tocut with the plasma cutter and faster looks good and ready to smoke keep up that grilling

[@alonzosanchez8577]

Allen That Is Amazing Really Nice Work Brother

[@ogmont]

Another great build, that's awesome

[@avabat12]

Beautiful work mate. May they sun warm your shoulders brother

[@timothyleger4385]

Pretty darn nice Allen !! 😉😉👍👍✌😁

[@cavemanjoe7972]

First view, first like! First time for everything! Nice work, as always!

[@Joey.R]

Good God your are talented man, great build!

[@countryboy6738]

Of course ya know I liked it brother,,I just really like the pride ya put into each build and dont come across with any ego,,

[@scott-kf1bi]

That must weigh a ton. Thank for the vertical, I can't see where the drain goes inside. I want to make one. How much for the plate of steel Allen? 500!

[@monte.est8925]

Great work Allen. I admire your and dedication 💪🏾💯

[@SuperDave21]

You're really good at these smokers Allen. Have you ever looked into a magnetic base portable drill press for your hole saw and drilling? They're really awesome, I've used one before and loved it.

[@andrewkennedy9704]

Those are not cheap. We have one at work and is awesome but the price I think keeps it out of a lot of people's hands.

[@SuperDave21]

@@andrewkennedy9704 I've got one, was a welder.... but in a business time is money, so if it did the job faster and better it's good for business no matter the price. It's an awesome tool and once you've had one it's hard to do without it.

[@andrewkennedy9704]

@@SuperDave21 oh I agree but as I'm sure you've seen it took him a long time to get a plasma cutter so I doubt a mag drill will show up anytime soon. They are awesome however.

[@ColKorn1965]

Even with a straight edge I can't cut a straight line....must be the 60 cups of coffee I drink each day.

[@BigFun4Life]

Great video...

[@minerdad02]

U 1 talented feller

[@hardwaydave6636]

Great Video, Like the vertical smoker. nice work. Do you even have time for your regular job anymore or are you full time doing your channel??? I see you're using the Plasma cutter. what's you thoughts compared to the torch. you're very talented with both. was just wondering if you have any real preferences for either one... Thanks!

[@marcosarriaga2278]

You do awesome work. One question would you show how & where abouts the drain is welded. Thank you sir.

[@minerdad02]

I won’t one so bad,here in Canada they want limbs for one half as good,...

[@koeoo361]

Молодец!!! Красота!!! 😻😻😻

[@huxmetalworks7371]

Good job you are the man

[@ShaneyChandyman]

Good work dude

[@thegrillingwog7381]

if only you were in australia! this is exactly something i want

[@adamayers1815]

Nice work partner! I want one.................

[@Flaminghamsterboy]

Can you please do a video on the folding table fabrication bud?

[@terryhatcher6042]

Allen good job sir

[@anthowinebradford2978]

Man you are awesome

[@redbaron1001]

How much would a smoker like that cost in materials and labour? I've recently been thinking of having a smoker like this built as an investment and because I love smoked food, but I'm not much of a DIY man and would really appreciate it if I got an answer.

[@mattnelson5399]

You make some nice smokers, are those galvanized treys inside the smoker and if so can't they make you sick by cooking food with them

[@doitallgaragetx]

When did you get the plasma cutter? I've always seen you using a torch. Nice smoker, man.

[@goofsaddggkle7351]

Sweet!

[@jmcenterprises9591]

Good work, nice smoker. What do you think of the plasma?

[@peteharder6325]

Allen, is there a magic number to the firebox to cook chamber size ratios? For example should the fire box be a 1/4 of the cook chamber?

[@chuckccfd9]

How do you like that new welding and plasma set up

[@matthewkitchur3119]

Do you have plans available

[@GaryYochum]

Where are you located ?

[@danielbreach7428]

Alan, how many man hours do you have logged in building one of these?

[@jamestwilley6481]

I know this was a year ago and you may not see this but how did you do the grease trap?

[@Allensweldingwoodworking]

I have some newer videos that show most of it

[@rvalcourtpersonaca]

WTG with the plasma Allen hope you like it?

[@faapopofaapopo2614]

Hi bro, What type of plate and mesh you're using please.?

[@robertorodriguesmarques3283]

Alles bom dia vc poderia passar os projetos dessas peças

[@fatherandkidsoutdoorsadven8688]

Would you be interested in sponsoring a competition Bbq team

[@snipemare95]

Do you have a website?

[@dougtam909]

I like that sale of smoke upright... What's your price brother

[@texasghost-rider]

Hey bro, how much a 42”x24”?

[@quovardisragland3463]

How much is a 20 by 20 is 2520 vertical smoker

[@Allensweldingwoodworking]

$950

[@pattrickAbels1970]

Stainless steel would be the way to go

[@cstgeorgegreen5761]

Do you use sheet metal or plate?

[@Allensweldingwoodworking]

It’s 1/4”

[@lesquintanilla741]

I want to buy one

[@sassysmoker7553]

How much would a custom smoker like that?

[@dontblameme6328]

He tells you in the video... TWICE

[@comptoncustoms]

Can u tell me what you would charge for this type of verticals smoker. I am in the market

[@dontblameme6328]

He gave prices in the video... TWICE!

[@rrocha1981rr]

Hey Allen what are the dimensions on this vertical?

[@dontblameme6328]

Watch the last couple minutes again. He provides exactly that.

[@alvindavis7940]

how heavy is it

[@Allensweldingwoodworking]

Pretty heavy

[@dougtam909]

Brother, please me a smoker thank you

[@Cali_Chiefn]

What would this run? Shipped to zip code 92571

[@fatherandkidsoutdoorsadven8688]

Would you be interested in sponsoring a competition Bbq team