Very Detailed Look at the Arrma Limitless V1 vs V2 Differences - Advantages vs Disadvantages

[@bryanjasuta9995]

Love the limitless knowledge, just started my first RC limitless build

[@roctiludropgarcia4296]

Do you know all parts needed to put a diff in center with say a 47t gear? Not looking for top speed but to road race without overheating

[@detroitrcwurks998]

Always file your scrub screws flat to remove the slight taper.. helps prevent scarring into your motor shaft output.

[@kiranas.v]

hello.. do you know if the tp 4080 can fit in the v2 due to its size?

[@onemansvideos2134]

on my v1 infraction I moved the center dif back and used 2 rear center shafts from the kraton...so I'm curious if I get the new chassis is will my mod work with it

[@Yay-hovah]

This is helpful for people like myself who insist on building from scratch.

[@RCexplained]

Glad it's helpful!

[@chrisduna6483]

Very Articulated and well done review that I can appreciate and relate too. Are those RC pro tech connectors on your xlx2 ?

[@RCexplained]

They are AS150's.

[@NoTekRc]

do you know if he esc/servo tray from the v2 will fit on the V1 chassis?

[@RCexplained]

I'm not certain if it does. What are you looking to do here?

[@TR3-WC]

This was very well done. I also need a link to cop one of those hoodies you were rockin this this video.

[@RCexplained]

Thanks TR 3! Link is in the description of the video.

[@----.__]

Do you know if you can use the X01 motor/esc/servos etc in the Limitless?

[@RCexplained]

More than likely you can find a way to use it in the Limitless.

[@eddieepicmedia]

Always very detailed and intelligent information in your videos. I am very cerebral and methodical so I can appreciate it. Thanks.

[@RCexplained]

I appreciate that!

[@bertramkettles8167]

Will that v2 esc tray fit in the v1

[@DoctorPPants]

Thanks for posting! Great info as always!

[@RCexplained]

Thanks for watching!

[@jonmikelgoicoechea9202]

hi. excellent program. a super complete video. I have a V1. What engine kit do you recommend? I am new at this. I would like a kit that comes complete. maybe buy it on ebay. or Amazon. And which controller is the best?😊

[@kryptonitelegacy4050]

So what would we a good ratio for pin and spur I’m trying to buy saga gears but I am not sure about the 5mm or 8mm do I go 8mm on the sour 5 mm on the pin keep the stock 39 and add a 32 pin ?

[@RCexplained]

All of the gear ratios are good but it depends on the setup you run to select the appropriate ratio. 8mm bore is required for the spur gear or it won't fit.

[@jarviscrawford7194]

Can the 5670 tp motor fit ?

[@DSC1320]

Can you run a v2 spool and driveshafts in a v1?

[@conradloag7046]

No that’s impossible it needs more elicit to grow

[@troypostie1252]

Posted b4 watching. Hope you give measurements for the center diff placement 🤔

[@colin1992]

Great comparison video ryan very helpful.

[@Rcghost-1]

Great job brother I love the channel

[@RCexplained]

thanks for the awesome comment! Glad you love the channel!

[@Rcghost-1]

@@RCexplained yes sir very informative I always appreciate your content

[@moereefer]

This very helpful great info thank you 🙏

[@RCexplained]

You are so welcome!

[@DavidJohnson-rb2wi]

Nice pass Sir I 👍👍

[@JoevsRc]

When it the limitless making its next run? With all your knowledge you should have the new high speed run record.

[@tktk-om8cg]

Does v1 body fit v2

[@RCexplained]

I'm using the V1 body on the V2 currently.

[@donaldbarron7916]

Nice 😊

[@RCexplained]

Thanks

[@jjohnson8891]

Do you know hobbyfarms by chance?

[@RCexplained]

No

[@detroitrcwurks998]

Battery trays half the size also

[@detroitrcwurks998]

Once again R&R ends up costing the customers and not the company itself.

[@LawrenceTimme]

Spekrum servos are rubbish. Arrma need to ditch them and go back to 25t

[@RCexplained]

Never owned a Spektrum Servo in this size

[@mikewest712]

I have never had a spectrum service last more than a month.

[@ColPKing]

For the amount that the limitless cost they could have made it run ready $450.00 + as it is shipped and add another $350. to $400 to get it running. To me it's not worth it

[@RCexplained]

What is your limitless open wheel, top speed run 1/7 scale alternative?

[@ColPKing]

@@RCexplained thus doesn't make any sense. What are you talking about?

[@ColPKing]

@@RCexplained The Vendetta would be perfect all you need to do is provide the battery and a charger for the battery. The car kicks in at 70+ mph and cost less than the limitless