Very Rusted Balance Restoration

Subscribe for weekly content 😀,
I found this Vintage Scale at flea market, it cost me 10€ , a very good price i think , the woman who sold me this beautiful scale explained to me that her parents bought in 1920 to sell food to the market every day until they died...
This is a very durable scale and after this restoration will survive for another 100 years.
I don't know if you seen my other scale restoration, if not pleas watch and tell me what you think and which restoration do you prefer, so i decided with this restoration to not make any paint because many of you requested this, for protection of the metal i have utilized a special produc an inhibator for rust , this produc is a thick oil which become very hard after 24 hours and don't let air and water touch the metal;
I replaced all the screws because they were very rusty.
Index of operation and materials:
( 01 : 14 ) disassembly
( 05 : 13 ) remooving rust with electrolisys
( 05 : 56 ) cleaning the plates
( 06 : 39 ) buffing the plates
( 08 : 36 ) polishing the plates
( 08 : 13 ) brushing the rust after electrolisys
( 09:58 ) buffing all the metal parts
( 11 : 09 ) fixing all the screws
( 12 : 05 ) cleaning all the parts with whitespirit
( 12 : 25 ) appling the Rustol owatrol antirust incolore
( 13 : 56 ) start asesembli the parts
If you like this restoration please share and subscribe
Disclaimer: I am no professional. I am completely self taught and would appreciate any feedback, advice or constructive criticism and suggestions .
#restoration
#antique
#scale

[@TysyTube]

Thank You for Watching! Please Subscribe 🥰😘 And Check My New video Here : (The Jar is almost full) 🤩 kzbin.info/www/bejne/Y3a9c5xvhMRjqNk

[@PraveenKumar-cj4mu]

Would sandblasting bring the same effect?

[@JohnSmith-tu1tm]

1:47 Ёйор срюдрайвер итс сакс, бай ню скрюдрайвер. Лайк а 3:58.

[@cromulentcommodore5896]

the Walgreens truck just show up at your house now?

[@BitchinSpectre]

what circus does she work for, again?

[@vjay4297]

In India its still common

[@tikke8511]

Thank you for not having music

[@TysyTube]

thank you so much for watching 😊

[@jessesmith2098]

I was JUST going to request chill music haha

[@klannstyle]

It is much relaxing without music.

[@zabnat]

I agree. If I want music I can just put something on that I like and not be forced to listen to something author likes. :)

[@delboytrotter8806]

WE WANT MUSIC...........OVERLAID .

[@ikaruseijin01]

He doesn't speed up videos, he just drinks a lot of espresso.

[@MrMrRubic]

He used redbull instead of water

[@8829053]

LOL 😂

[@HappilyHomicidalHooligan]

@@MrMrRubic And drinks it by the gallon, not the ounce...

[@DemOnicxFEAR]

If you really think about the fact that the video is sped up, this man is spending several hours in pure silence reviving this scale. It’s just him and the sound of his tools

[@TysyTube]

thank you so much 😊

[@DemOnicxFEAR]

TysyTube Restoration np brah! I know exactly what that can be like!

[@kareno8634]

@@TysyTube What? No tunes? That's Sad! Scale does work in end ~ well, not bad. =]

[@clairconstance]

i’m not saying he didn’t sit there with just the sound of his tools but headphones do exist

[@retiredinbali9565]

Did you notice that he changed his shirt - so likely over several days.

[@Koohwipx]

I just thought about the fact that the weights will no longer be accurate as some of the steel had turned to rust

[@mymechanics]

Very good work! That oil you're using for the steel parts is amazing, they got a very old touch with it! Btw I fell in love with your tiny anvil and hammer

[@TysyTube]

thank you so much My Mechanics😃👊

[@TysyTube]

thank you so much 😊

[@bike23august]

A iesit super. Keep up the good work

[@TysyTube]

thank you so much Adrian 😊 you are the best ✊

[@MusicFurler]

my mechanics me too I love hammers I collect them never seen them that small where I live.

[@GERINHO591]

Congratulations, you did a fantastic job. But I think you forgot a little detail. After so much cleaning and polishing of, certainty that the weights also needed to be calibrated.

[@rideitlikeyoustoleit7640]

Doesn't matter, the knife edges are ruined

[@pokemasterrand8350]

Yea I was wondering about that the weights that is

[@Sam-Lawry]

weights were highly controlled back then,with stamps. They also used 1l water to check 1 kilo.. I did it on markets on sometime one 1l of water is 1.080grs or more.

[@FluffyDohBoy]

The restoration looks great. Might I suggest for the next restoration, instead of taking a steel hammer and steel anvil, try an oak block and a hard rubber mallet or nylon/plastic hammer to the thin brass pieces. Hammering brass between steel thins and stretches the brass where a wood block and the hard rubber, plastic or nylon hammers won't.

[@mannco9458]

Holy smokes a guy who isn't a 12 year old and know what his talking about

[@klannstyle]

@@mannco9458 lol, there are plenty that watch but not talk. And even if they are kids and trolling, what's the problem? It's their time to be here as we had our chance to be trollers when we were kids. The only issue is to be kind of polite ;-). It is internet and with a decent comment you can get smth, even a troll. That means it got his/her attention ;-)

[@gussyvangard5181]

Smartass alert

[@Locked717]

Craftsmen, blacksmiths bend, stretch and mold even harder metals using wood blocks and wooden-, brass- and steelhammers. When metal bends it stretches, hardens and gets thinner. Trick is to know what you're doing (: I'm not here to attack your comment, just saying my own opinion on this matter.

[@kareno8634]

W0W - REALLY! I Cringed, Closed eyes, Yelled at screen - JEEZ I Must be too picky. or not! =]

[@WhosAGoodDogue]

So glad you didn't use any paint. This would have taken away all it's originality and patina. Some things are better _not_ fully restored with new paint, fasteners and looking like it's just out of the factory. However, this is what I call a 'sympathetic' restoration. The rust inhibitor is wonderful stuff. A suggestion for complementing old metals is the use of brass roundhead slot screws (not phillips). A lot of old fasteners back in the day were brass, and for these scales, they would compliment the brass weighing pans. Regards. Dawg.

[@Tehillim5784]

Yes-Yes-Yes.... You kept all the original character possible and still made the piece functionally perfect. You even replaced the ruined bolts with period correct straight slotted bolts. The original tool maker of a 100 years ago would be proud of you.

[@TysyTube]

Thank you so much Linda, this is what people want me to do

[@angersangel]

@ Linda Chapman More precisely these screws LOOK like period correct ones BUT they actually are NOT because... The standard pitch of european screws (specially small ones) had evolved in mid 50's. This is just to give you some precisions, I agree, this is BTW a beautiful job.

[@angersangel]

post-scriptum: for detailed information about it see "norme SI" and "norme ISO" ;-).

[@asadraza4729]

+TysyTube Restoration price

[@asadraza4729]

+johnny rotten price?

[@00xero]

That is the cutest anvil i've ever seen 😂

[@marklefler2112]

Remove the oil and paint from all piviots and brearing. To much friction, dry works better and that is how it was intended. Sharpen the piviots. With a 1000 grit stone not files, power tools or sand paper. If the scale was serviced at the scale company I work for thats where I would start. Ideally their is 5 to 7 direction changes before the scale gives you a reading. All that said nice job on making an antique look very love. Love the look you choose to use. Hope my recommendation helps.

[@flumbofrommelkont6863]

perfectly balanced... as all things should be.

[@outerheaven1000]

had to scroll down to see this very comment thank you very much haha

[@cody_d3628]

🤣🤣

[@TheGoodoftheLand]

Great Job! Love the look of the cast parts!

[@TysyTube]

thank you so much 😊, i follow your channel, that rusted axe turned out so good 👍

[@iwasglad122]

So glad you resisted the temptation to paint it. Looks great as it is!! Am loving this channel!!

[@TysyTube]

thank you so much 😊

[@thebarkingtoadhasarrived5451]

This is a much better restoration than your previous scales; you managed to fix any faults while keeping the patina of decades of use and preserving it for the future. Very well done!

[@TysyTube]

thank you so much 😊

[@TysyTube]

i am still learning 😀

[@lorik199]

Unde ai gasit uleiul penetrant cu care ai dat pe metal?

[@NikhilluminatiOfficial]

1:40 *Face reveal* 😂😂😂😂😂😂

[@dreamthefirst1345]

nikhilluminati music he’s kinda hot, ngl

[@Poisonjam7]

I also came here to mention this. 🤣 Since he loved the comment, I guess it was intentional?

[@awesomefacepalm]

You should get yourself an impact screwdriver. Totally worth it for you :)

[@evilgremlin]

Yeah, it's a kind of tool you cannot imagine your life without after buying it. And it's less than 10$.

[@alanalexisperugino]

He destroyed aesthetically by doing it this way.

[@operator8886]

@@alanalexisperuginoi think you've destroyed most of your braincell

[@imouse3246]

He should get, or use, a centre punch before drilling.

[@rennkafer13]

They're $8.99 for an impact driver set at Harbor Freight. Had mine for a fair number of years and it's as good as any I've used. The bits are weak for heavy use but for small screws like this they're fine.

[@billybobfudpucker5817]

Dude you are a butcher. Metal on metal over and over equals damage you have to remove. How about a dead blow hammer or a bloody piece of wood in between. I am not a fan.

[@TheDroolpan]

+/- 5 Grams = DON'T USE FOR SELLING WEED!

[@Datrebor]

LOL Back in my days they didn't use a scale to weigh it. They just put buds in a bag till they felt that was enough. Haha

[@pohkeee]

🤣🙃🙉🙈🙊

[@troyadamson8618]

Why not? They won't know.

[@Anthology_of_Holly]

I like the painted and this style, just depends what look you’re going for. If you want it to look brand new, paint it, if you want to keep the patina and antique look, keep it like this. Great work either way!

[@clapton79]

HA!! We saw your face!😂 Whe you wrote it took 5 hrs for you to polish the plate... man, you love what you do. Why is this video not 5 hrs longer then?😂 I admire your speed hammering skills!😂

[@Landrew0]

You are a metal beautician.

[@TysyTube]

🤣 thank you so much sir 😊👍

[@AbhishekNag666]

Restoration videos inspire me... to restore my own life. Thanks TySy.

[@clapton79]

No trying to be a smartass here but.. Warren Buffett said the best investment is learning, that is investing in you. It is worth loving yourself in the good sense and investing in yourself, not just by emotions but self parenting. Good luck mate!

[@svd9549]

you didn't recalibrate the weights. With removing the rust and policing them they must have lost some grams.

[@c.r.3350]

Nice work! Thanks for not painting it, love the way it looks know. Maybe you should think about a nother lubricant, becaus WD40 is no lubricant it is a cleaner or/and a remover. There are better products on the market with even lower price.

[@TysyTube]

thank you so much 😊

[@WatcherintheDark69]

Penetrating oil would help.

[@olegmalyk1639]

Liquid wrench I believe is a good one compared to others. Project farm has a video on it

[@aaasss7777]

У меня у одного впечатление, что балансировка после реставрации намного хуже чем до?!?! То самое чувство, когда лучше прибору не мешать работать!

[@айым-э9я]

Сам с начала научись

[@aaasss7777]

Ты просто посмотри, как качаются весы до реставрации и после, видно же, что в начале было лучше. Содрать ржавчину каждый может, а вот сделать грамотную балансировку очевидно что нет. Это просто констатация факта, а то что он всадил столько труда и получилось так печально - ну бывает.

[@ВасилийПрлзиков]

​@@aaasss7777Я тебя! и таких как ты! Презираю! Зачем ты пишешь ?вы никогда ничего в жизни не добьетесь!,Посмотрел?Понравилось? поставь лайк и иди дальше!Неет бл?№%! Оно увидело очевидное!!!Гееений!Сам автор на этом заострил внимание!!!А нет)))ты же один из всех такой внимательный!?Ну будьте же людьми!Видешь человек старается!что-то просмотрел!,в чем-то не понимает!,ПОДСКАЖИ!!! предложи свой вариант!Неет! тут то нужен опыт(, мозг(. P.S. таким способом ты поможешь ! и автору, и друзьям и брату

[@aaasss7777]

@@ВасилийПрлзиков Презирай себя, дятел! А зачем пишешь ты?! Не добьешься ничего в жизни ни ты ни твои дети! Я посмотрел и лайк поставил, если автору видео не нравится, чтоб обсуждали видео то он закрывает комментарии, он даже лайкнул мой коммент, тебя это задело?? Автор англоязычный, понял он это или нет не знаю, а что я ему посоветую? Разобрать и собрать снова? Хотел бы добиться лучшего качества то не выпускал бы видео с таким итогом. Учить никого не собираюсь, если он решил, что это достойный результат, то так тому и быть, свой идеал у каждого разный, да, он потратил много времени и сил на это, за это и поставил лайк!

[@ВасилийПрлзиков]

@@aaasss7777 сожалею потому что когда добился!(типа смог) то хочешь чтобы ценили тебя как волевого человека который сильно старался,не спал сутками!и т.д и т.п, ты будешь смеяться но ценить будут ТОЛЬКО ТО ЧТО ТЫ ЗАРАБОТАЛ! не тебя! сколько хорошего не делай! ну за дятла и петуха)))помянем их! лет мне 36!

[@dirtyhairy8884]

The other scale was nice but this one is beautiful, Great job, my friend!

[@TysyTube]

thank you so much 😊

[@queenloopy]

This is awesome. For some reason this calms me down. Thank you!

[@TysyTube]

thank you so much 😊

[@huzaifajauffurally2684]

Same here buddy

[@francesconicoletti2547]

AMSR restorations

[@cvoisineaddis]

You missed a great opportunity to make it 19:20.

[@averynelson1186]

0:15 in a Nancy Drew game by HER Interactive

[@onabikewithadrone]

Cool restoration (as usual). But who've helped you with the translation of the video description to the Russian language? :-) It looks like it is just a Google Translate job and it is bad for En-Ru translations... Let the community do the work :-)

[@mounaim2240]

I still have a small one I use for my weed

[@LeglessWonder]

Time to start using one like this. Go big or go home

[@juanaq]

so much better and beautiful that the former one!

[@TysyTube]

thank you so much 😊

[@drummerchick1414]

That screw was like, "I DON'T THINK SO, BUDDY! I'M THE OG!" 😂😂😂

[@NaimRack]

Restaurar balanzas es lo más difícil. Los objetos pierden peso en proporción al óxido que producen. Quizás quitaste más metal del que debías a alguno de los dos lados.

[@GonzaGSK]

Hello, Your videos are excellent for me, you say you are not professional but for me you are, since your high quality of restorations says so. PS: you cannot select the minutes of the video because they have a space in the middle. Thanks for reading ... 👌🏻

[@old_seadog]

That's a well balanced video which took some weights off my mind.

[@progamer_221]

Lol dad jokes

[@rmarty550]

Excellent job. I’m not trying to be a jerk, but with as much restoration work as you do you should invest in a media blaster (walnut, sand etc.) it would make your job so much easier. Thanks for the videos!

[@vincentpasquinelli5875]

Nice la restoration! Tu fais des vidéos de plus en plus qualitative bravo continue comme ça!👌

[@IckyNeko]

When I was a kid, the bank my parents went to had a lovely big one like this, it always fascinated me.

[@IckyNeko]

I loved seeing you take all the intricate pieces apart.

[@hakai-shinbeerus6365]

Come to India take as many as u like

[@thereal_morxy49]

Are u suggesting kidnapping

[@ashharhasan3120]

@@thereal_morxy49 What he means is old balance scales like this are still used by most grocers and hawkers. Infact, I've seen many as big as a man in some shops.

[@komalmotwani51]

Yes those big ones are used by the people who collect scrap

[@val-eb3ke]

take as many what

[@MegaDirtyberty]

@@val-eb3ke Indians.

[@alex_chubanoff]

Thanks for Russian subtitles and description of video.

[@KC-fc8ng]

Love all the restoration projects. Admire your skill, patience, and knowledge. Excellent !

[@adenilsonferreira4015]

I have a mousetrap similar to a bear trap, it must be almost 80 years old, it was the grandfather of a man that I worked for him, he is already 66 years old, so imagine, if you had facebook I would send you pictures, because I do not have Instagram

[@boi8bp233]

It was workinb best when it was rusty. Then you "fixed" it 😅😂

[@ВиталийЖданов-ф1л]

Как приятно смотреть твой канал с переводом на русский! Отличная работа! Молодец!

[@mansoorahmed.n.s2345]

In between so many restorer your restoration is professional and clean. I am from Chennai city, South India. For the past two weeks I am watching your videos. It's amazing though the videos are 15 to minutes. But I know how cumbersome job is restoration. Keep it up bro. God bless you.

[@simranjeetsinghmatharoo3877]

I see this kind of scale everyday 😂😂 these are pretty common here in india...

[@Sislis01]

The before and after, my god O.O Its beautiful

[@reubingeorge]

Maybe buy a sand blaster? As a long term investment, it would significantly reduce the cost of your chemical purchase!

[@chrismayer3919]

Yes; even a small sandblaster unit will save you time AND effort. Try one!

[@CatchBurning]

6:02 Oh man, that looks like pancakes, damn I'm hungry now. 😅

[@ЕгорЕгоров-к3с]

Мне одному кажется что до реставрации весы более плавными и точными были . А после чуть заедать начали?

[@andyruse4670]

Red loctite on flat head screws... Why? It’ll have the same problem of not coming apart later...

[@tulipsinthedark1]

Riiiight?! This is the comment I came looking for!

[@gtb81.]

Isn't red loctite designed to not let things come apart ever?

[@andyruse4670]

The Doctor pretty much. With red you’re gonna want to skip right to heat because that’s what you’ll need to get that fastener apart.

[@gtb81.]

@@andyruse4670 then i cannot fathom why he would use it, i never use red unless i set something to a specific depth and it has to stay there

[@Monuments_to_Good_Intentions]

The number of this locktite does not require heat. This brand manufactures a few different types of locktite. Especially in the red color. Wont need heat for it. We use this on aircraft screws. I have taken the screws out with ease many times.

[@TheRostbif]

It's good to fall asleep with your videos )))

[@assi218]

just to add a suggestion.. when you do another restoration of scales like such, try keeping a record of which came from the left part and came from the right, which sides a certain part was facing, etc. and put it back as such.. no offense meant but, the scale was probably working "accurately" during its time.. and yes, as someone said in the comment, the sanding, buffing and even the materials that rust ate away played a huge factor for it ending up unbalanced.. good job with the lead though..

[@XeoN-PL]

He should check mass of the weights on precision laboratory scale to be sure that every one of it has it's proper mass.

[@Paintplayer1]

I think his method of balancing with lead solder was sound. +/- 5g is a really good accuracy level for a scale of this era in my opinion

[@atari6850]

T'es lien, time code ne marche pas dans la description. Il faut les repprocher et enlevé les parenthèses

[@JekZukerman]

А чего гирьки-то на кухонных весах не проверил?

[@savens5993]

О, русский

[@Wapicks]

@@savens5993 не. Тебе показалось

[@КаналРазвлечений-я5м]

Не проверил, а поверил! Проверяй домашнее задание! А всё что связанное с весом, объёмом ,размером ( градуировка на шкале, линейке. Также частота, напряжения, напряжённость, сопротивление и сила тока) всё это, проходит поверку и калибровку!

[@McPoink]

Even though I’m watching what you’re doing it still seems like magic!

[@RituranjanShrivastwa]

Your "antique" stuffs are still used in India, in some places. Digital scales haven't yet replaced the old scales in the farmer's markets.

[@ArgoPower]

in Europe also are still used...

[@TheAlexXxA1991]

I know that is stupid to ask, but are you sure that that scale is on 100% level surface?

[@crazyforyou802]

Por que o titulo do video e em portugues e os comentario sao em ingles???

[@albaa1877]

El título está en español...😉

[@crazyforyou802]

@@albaa1877 pra mim e portugues kkk

[@albaa1877]

@@crazyforyou802Dice: restauración a escala vintage 1920 ¡esta vez te escuché!. - Si te fijas los signos de exclamación están al principio y al final. Iso solo acontece no espanhol. Cumprimentos 👍

[@crazyforyou802]

@@albaa1877 abracos

[@leticiax.6523]

que eu sabia o google chrome traduz o título de vídeos se a pessoa que fez o upload autorizar, se seu celular estiver em português o título será traduzido pro português, se estiver em espanhol vai traduzir pro espanhol e assim por diante

[@carrott1168]

Because you listened to your viewers I subscribe to you.

[@adityakumar-qq7si]

Well last time I saw this was when I went to get vegetables like 5 hours before I watched the video. It may be antique to u but to India is a piece of modern machinery.

[@ANG3LM1301]

Perfectly balanced, as all things should be.

[@srfrg9707]

Salut. Tu as eu raison d'utiliser un inhibiteur de rouille transparent. Il donne un aspect brut et authentique à la fonte. Si tu avais chauffé les plateaux (pistolet air chaud) avant de les marteler tu aurais peut être pu les débosseler un peu plus facilement, mais ça requière du doigté.

[@ej5650]

The little red anvil was cute and unexpectedly useful Does anyone agree with me?

[@DavidTheGamer27]

9:05 He does have a face!! I was starting to suspect we were watching a headless robot work.

[@TysyTube]

yes

[@cody_d3628]

Also at 1:40

[@axellecolombet13]

Seeing this video makes me both happy and sad My grandfather used to have a balance too, he passed away 10 years ago and because of rust my father chose to throw it away (I think? I was 8 or 9, so I don't remember. But I never saw that balance again). Seeing this video somehow manages to make me feel like I still am in my grandpa's living room, trying to figure out the weight of every object I could find. Thank you for renovating this object, seeing this truly made me nostalgic. You have done an incredible job.

[@blblblbl111]

Сначала испохабил вещь, потом начал балансировать. В следующий раз разбирай отбойным молотком, антиквар хренов.

[@blblblbl111]

@@tik19085 Я не знал, что ты с Украины. Моя оценка не имеет никакого националистического уклона. За полгода я просмотрел сотни подобных роликов. И в некоторых оставлял положительные комментарии. Но в этом... Действительно красивая вещь, которую восстанавливают, срезая болты и выбивая молотком всё, что возможно. Это варварство.

[@unitako1650]

Tbh I’m starting to wonder why we have those scales in school

[@manoelbsf]

Parabéns pelo trabalho , ficou com ar de restauração e não de conserto ,achei bem melhor até parece q foi pintada .

[@Acesar2012]

Brasileiro esta em todo lugar mesmo.....kkkkkkkkkkkk

[@manoelbsf]

@@Acesar2012 é noiz mesmo ,kkk o kra trab. Bem

[@Acesar2012]

Sim...é excelente o serviço dele, e eu adoro ver restaurações, é um prazer muito grande ver essas peças antigas e com o trabalho de suas mãos elas voltarem ao seu estado original, é muito bom.

[@manoelbsf]

@@Acesar2012 depois v esse canal, my mechanics o maluko é perfeição pura

[@manoelbsf]

@@Acesar2012 esse tem umas soluções interessantes pra resolver problemas nas peças é show

[@キョリュークルカーン]

This was a large scaled restoration!

[@jh5325]

12:45 : bless u

[@manoharsinhpadhiyar8591]

..n

[@AlexandraZe]

Why?

[@plushifoxed]

Alexandra Zeres he sneezed

[@edog6504]

The last time I saw a sclae like this was in my school's kitchen

[@mikecochran2452]

Sand blaster and powder coating!!!

[@kenc2257]

And, the powder coatings must be in different colors.

[@alexadame7389]

How does he have barely 200 K subscribers but one million views ??

[@lordvengerx]

Very awesome :D

[@TysyTube]

thank you Lord Venger😊👍

[@lordvengerx]

You are welcome :D

[@MHzProduction]

Funny thing is that I see it everyday. Couple of my local shops still have these.

[@jijzer3284]

so funny 100 years old and still accurate most modern chinesium crab has to be calibrated every year

[@alejondelacruz5096]

I saw one just like this at a museum and its pretty accurate.

[@aleksandersuur9475]

Better check your numbers. He states +-5g, he only has 2.6kg of test weights, which by the way are not checked, that makes his accuracy worse than 1 part in 260. That's pretty pathetic, a cheapo 10 year old bathroom scale that has never been calibrated wins that accuracy contest any day as long as it has a 3 digit readout display. Pretty much the only scale less accurate than this would be a mechanical bathroom scale.

[@iamthatiam44444]

Like how he lays all the rusty peices out all perfectly inline like their corpses ready for embalming 😋

[@5cloudwalker]

I can appreciate the time it took for cleaning you are a trooper 😊👍🏼

[@eloisioalves3048]

Parabéns pelo seu trabalho assim nós temos uma noção como os nossos antepassados usavam estas maravilhas.

[@ANIManiak89]

Вроде и здорово всё, но чаши выглядят отвратно, и чёткость работы до восстановления выглядела лучше.

[@aleksandragapitov5093]

Он не профессионал. Любитель.

[@Stepuntik]

Абсолютно согласен! То же самое хотел написать! Что это за восстановление, когда устройство в итоге работает хуже, чем будучи ржавым. Про припаивание дополнительных граммов на одной стороне я вообще молчу. Мне гораздо больше нравится канал my mechanics. Там швейцарец твои чудеса. А этому парню желаю успехов, надеюсь он будет делать в будущем качественнее.

[@wealfarouk]

انا أقدر اعاير ذلك الميزان واجيب فروقات الاوزان في الابعاد لأنها شغلتي بس الان بعمل في الكهرباء بس عمري ما نسيت هندسة عملة

[@ztheg_]

When you think about it, all sanding does is make the parts slightly smaller.

[@moroccan0714]

In Moroccoyou in 2019 you still see it

[@joetri1970]

Wow. From trash to treasure.

[@TysyTube]

yes 😍😊👍

[@sammydean136]

This video is very old and I’m quite aware but try using something else for lubricant. WD-40 is great and all but for the most part it gets rid of moisture inside what you spray it into. Things like TriFlow are MUCH better at lubricating things.

[@ericlarson9386]

I used a balance like that, different model, with my first job at the University of Minnesota in 2001. We saved money by using antiquated equipment like this iin order to afford expensive chemicals. It works well enough but only if you have the patients and intelligence to operate it instead of reading the results from a computer monitor. It also means that you can keep working when the power goes out. I also knew how to use a slide rule.

[@thomasaushauser1940]

I have a very similar scale, in addition beautiful weights from polished brass. This scale has no rust and even works. But I don't use it because it is so impractical. In the kitchen I have an electric scale with tare function, accurate to the gram. This plastic-scale costs 20 Euros and there will be no one to restore it in fifty years. Nobody will ever repair it. If it is broken, it will end up in the garbage, along with a thousand other electric scales. If I were a scale, I would remain mechanical. But I have no choice. I am already electrified.

[@tawAAkul]

Would a sandblaster be a good investment?

[@ericlarson9386]

Good job balancing the arm. But you did some grinding on the reference weights. They either need to be calibrated or replaced to go back into service. But I would put it on display. You should try to find a hand powered centrifuge. That would be cool.

[@machinesjohns240]

7:11 cute 🙂

[@TysyTube]

🤣🤣 is so tiny

[@machinesjohns240]

yeah

[@gauvainlefort9012]

i love the way you use dw 40 for everything

[@Elon_Trump]

watch these in double speed its amazing

[@podarkes3149]

8:55 my favorite moment in the videos of restoration

[@kimpulsipher647]

pretty progressive business to be using kg in 1920. They didn't standardize it till 1965.

[@francesconicoletti2547]

Kim Pulsipher this is a French channel. They invented the metric system in the 18th century

[@kimpulsipher647]

@@francesconicoletti2547 I believe the show indicated it was used in England, not France. If I am wrong, please forgive my error.

[@francesconicoletti2547]

Kim Pulsipher no problem. I just noticed the repair of french fireman’s helmets, and french Air Force lights. The give away was the test of the french emergency warning system in the background .

[@walkertongdee]

Suscribirme para el contenido semanal this, encontré esta Escala Vintage en el mercado de pulgas, me costó 10 €, un precio muy bueno, creo, la mujer que me vendió esta hermosa escala me explicó que sus padres compraron en 1920 para vender comida a comercialice todos los días hasta que mueran ... Esta es una escala muy duradera y después de esta restauración sobrevivirá durante otros 100 años. No sé si viste mi otra restauración a escala, si no te ruego, mira y dime qué piensas y qué restauración prefieres, así que decidí con esta restauración no hacer pintura porque muchos de ustedes lo solicitaron, como protección. del metal, he utilizado un producto especial, un inhibidor de la oxidación, este producto es un aceite espeso que se vuelve muy duro después de 24 horas y no deja que el aire y el agua entren en contacto con el metal; Reemplacé todos los tornillos porque estaban muy oxidados.

[@sysublime5091]

My uncle had one of those scales in his butcher shop. When I was a kid