Very simple way to make auger

[@adamconnell5965]

Dude... you literally just saved me days if not weeks of wasted time on a project I've now put off for 4 years because I needed to make a set of small augers

[@andrewdelgado4374]

You too huh? Hahaha what are you making?

[@JosephineDuring]

Brilliant - my husband was so pleased when I showed him this - he has been struggling to make a neat auger and this solved his problem.

[@5starking696]

😇

[@jmscnny]

Love your stuff, Mladen. It always makes me feel as though I should get off my arse and head out to my workshop.

[@ladedk]

Hohooo!! Way better than bending by hand. Good job, sir!

[@faithmachinerycenter]

Wow! Great and practical tool...Thanks for giving idea for my project.

[@joelongstaff7601]

Sir Your very clever. Thank you for sharing and teaching so many people. Most kind of you. Thank you from northern Canada. God bless.

[@mariotrigonis7866]

Bravo! Thank you for sharing. Keep up the good work!

[@smacurface]

Hi Mladen.... I made an auger a ýear ago as a post starter. I followed your design and the pipe stamp exact. The washers I could only obtain here are thin 1.2mm. Ridiculous. On using for first time it worked great. Then I must of hit a stone that bent the front lead tooth of the washer. That made it useless. So I left it. One year + later I dug it out and welded a 3mm mild steel lead to the bent front of the washer. I tried it and I'm so happy that it has worked as a pre hole guide to wooden pegs I've driven into the hard clay soil. Saving me tons of time and effort. I just had to come back to your channel to thank you. *THANK YOU* 👍👍👍👍👍

[@FFLFFS]

Many thanks. I pray you make a lot of money! You gave me a starting point to make 15” -38.1cm flights for earth auger. With 9.53 mm steel.

[@gayanmuhandiram2831]

Such simple solution to a complex problem. You are a genius. Thank you :)

[@astasna]

Well done sir ! You put science in the hands of everyone !

[@Mladen365]

that is why i make my projects,i want to help other people in the world,greetings from Croatia

[@astasna]

I respect that so much ! I want to do the same.

[@bobbylineberry146]

Thanks I made my device at work. Very nice process. I'm getting my warshers later. Saved me about seventy dollars to make myself.

[@pasandinuka]

this is very important.......... good job

[@thujavon62]

Nice job Sir, Very ingenious Thank you very much for sharing Hi to you in Crotia, Michel Canada

[@aaronnolido1196]

wow...you're a genius...

[@Mladen365]

Thank you

[@curriegc3611]

allot of people would just go buy one, but I think this is cool. making your own. You could have a whole set. There's something about making your own that's special t that many just won't understand. Very cool.

[@Mladen365]

Thank you,greeting from Croatia

[@curriegc3611]

Mladen 365 Thank you and greetings from Los Angeles. One of my dad's best friends is from Croatia and he is a pastor/missionary there in his home town or area, I'm not sure where.

[@Mladen365]

It is nice to hear that

[@davywavy5364]

Nice Job i'm Well impressed - Thank - you very much

[@thornwarbler]

Another great idea .............Thanks Mladen

[@Mladen365]

Thank you,this is very easy way to do it

[@christophermonahan207]

Excellent job. Simple and extremely effective. Nicely done.

[@Mladen365]

Thank you,big greeting from Croatia

[@thead10]

Inventive! Excellent Hand work!

[@alwoolhouse6255]

Great design, great video, fabrication, explanation and English. Thank you Malden.

[@khosrosadi5196]

It's perfect idea. I love it. Thanks from middle East

[@123prenyvkmg]

I loved it, very genius taught, Thank you for your video and uploading and sharing your knowledge.

[@Mladen365]

I will always share and help others,greetings from Croatia

[@dwest320]

The human capacity for innovation never stops amazing me. Nice work friend

[@Mladen365]

Thank you and big greetings from Croatia

[@DanWrightOICU812]

This Gentleman is awesome. I have seen some of his videos, and wish he were my neighbor!

[@phlintify]

Very good job my friend

[@wjj4832]

Thank you for all the helpful videos and ideas.

[@niamulbary6366]

God Bless you. You are very simple and honest way to demonstrate which help me a lots for my new project.

[@ChixWoman]

Very well done. Good idea. Thanks

[@kneehats2311]

thank you for the great video. don't know how I didn't think of this or something similar

[@nitrousman8882]

if anyone is interested in a variable compression auger, try doing it on a lathe. if you want a 10mm diameter auger, with 5 lifts on a taper shaft, just chuck up a piece of 10mm round stock, with a slot milled down to the center of the rod. Drill the first hole to the smallest diameter of the auger shaft. part off the first "washer" and continue to the next size hole. You'll have a neat compressive auger for your next project. The shape of the lifts could be shaped as indicated by the device in this video. Clever way of shaping these discs! Thanks for sharing this.

[@MrInnovativeEnergy]

Very nice work my friend! Thanks for showing us how to do this!

[@Mladen365]

Greeting from Croatia

[@marcelloo.anselmorodrigues2925]

The simplicity is the inspiration of God that is transformed into genial ideas. Congratulations my friend.

[@Mladen365]

Thank you,greetings from Croatia

[@danilobojos5245]

brilliant idea! mostly for smaller screw flights which is harder to form by hammering alone. Good for handymen.

[@Mladen365]

Thank you,greetings from Croatia

[@paulallen3405]

Very clever and simple device, great idea.

[@Mladen365]

Thank you

[@skeetersaurus6249]

Brilliant video! I've seen large (1m and bigger) industrial auger blades formed, and other than $600,000 in equipment, this is, more-or-less, how they are hydraulically formed and assembled. I was thinking about making pellet-stove feed augers, and this will work perfectly.

[@Mladen365]

In my previous video how i made auger,i cut washers and bend them manually,it is good but auger did not look nice,this device help me lot,it is easy to use,very cheap and now auger look how it should be,greeting and thnx for watching

[@Doggmatt]

great idea! thanks for sharing!

[@abdulabdulrahman3871]

Thank u sir. From Nigeria. I really need this.

[@fickleharpie4281]

Brilliant idea, pal! Thank u for sharing ur design.

[@pelokben]

Excellent idea, excellent work! Exactly what I looked for! Hvala!

[@Mladen365]

Thank you,greetings from Croatia

[@tectalabyss]

Great job has always thank you. All my best. Bobby

[@kuldeepkumar1288]

very nice dear.and your language is realy good..

[@Mladen365]

thank you,well language is not the best but important is that everybody understant what i want to show in my projects,greeting from Croatia and all the best in new year

[@michaelparsons7334]

Genius. Best auger making video l have seen.

[@gerrytaylor6393]

Timeless thinking. Admirable. Thanks for the inspiration.

[@nilesh311272]

Thanks for your best advice. You solves my combine machine auger problem

[@ENDUROEVOLUTION]

Best video on this subject i have found so far 🤘nice work

[@steamyfog]

This really is an Archimedes screw, just what I need to move small coal into a boiler firebox. Thanks for the design!

[@pnwRC.]

GREAT video, thanks for sharing! This method is so easy, I wish I had thought of it.

[@Mladen365]

Greetings from Croatia

[@jamkgc]

Thanks for your idea, it will helpe me a lot...

[@WalidWalid-qb4cv]

Very perfect DIY ! Thank you!

[@mushtaqmirza9390]

very nice work i like it 100%

[@jakriyakadri4237]

fabulous device you have made you solved my problem thanks..

[@Mladen365]

i am happy if i can help,greeting

[@karanjawanyoike7169]

Great explanation and very helpful. Thanks

[@sparkyy0007]

My diy former didn't have the flats at the ends so the washers wouldn't align properly, this helped, thanks for the post !

[@cavemanjoe7972]

I like that small vice you use to hold the washer as you're cutting it. Nice video!

[@Mladen365]

Thank you,greeting

[@anapaulino1466]

GENIAL. CONGRATULACIONES ,gracias por compartir sus valiosos inventos.

[@umbhanu8711]

Thank you for sharing this wonderful article

[@Rexiline]

Really excellent idea. Ur really a genius.

[@jimwinkler]

Great idea and implementation! Thank you!

[@Laurentius_Studio]

Now am able to grasp the concept, Since am in process of making one out of cardboard. Wanted to make a cat feeder by using the 3 inch T PVC fitting. Since it's relatively economical to build one out of scratch with minimal cost. Thanks

[@torbendk2777]

Simpel and effektive 👍 Well done

[@Mladen365]

Thnx,greeting from Croatia

[@FletcherHillier]

This is a great jig, you could use a bottle jack for the compression and you only really need a few inches of pipe

[@pockeybearmilk264]

you are very smart , I like your video

[@Mladen365]

Thank you,greeting from Croatia

[@MH-ie1sg]

Like it man! I would use a press but with a hammer it works also. Good job. Always enjoy your video's

[@Mladen365]

Thnx

[@benmail128]

Outstanding! Thank you for sharing!

[@burdettward8605]

Outstanding video. Thank you!

[@ajaylengare2493]

very nice. You showed me the simplest idea to make it for prototype of a product. thank u

[@rostatement]

Beautiful, inspiring, thank you!!!

[@Mladen365]

Thank you,greetings from Croatia

[@jmstew642]

nice job, great job thinking that through

[@dennisseeker36]

thanks good video and nice idea, i am planning to make an auger to drill small holes in earth for seed planting, i like yours and maybe will make the form someday but think all i need is a couple at the bottom and dirt will life , i do not need to go deep but great vid and cleaver work! thanks

[@daviddefranco5218]

Bro, you are very good.

[@tasadduqmajeed68]

Sir, you give such a brilliant idea for bending of screw flight. Thank you so much. It can be used both manually and by the press.

[@Mladen365]

It is very helpful tool and i made it to help others,bad thing is some other people take credit of it,greeting

[@tasadduqmajeed68]

@@Mladen365 Don't worry Sir, Allah will give the rewards for this.

[@Mladen365]

Thank you,greetings from Croatia

[@tasadduqmajeed68]

@@Mladen365 Sir you are Genius.

[@MegaPhuntsok]

Thank you, very good and simple, I am subscribing because you videos is very helpful.

[@cesprojects8751]

thanks bro I m worry abt to make dia for screw flight but u solve it in seconds thank you so much this is very usefull for us

[@robertomerced1184]

I like; very good job congratulations.

[@MrMeasureTwice]

Nice work and very creative!!

[@moonolyth]

Fantastic!! Great Job on something hard to make!!!

[@narendrakhetia9732]

Thankyou. Nice . You have solved my problem.god bless you

[@moneyflaxgaming7338]

I like your video.thanks.

[@Ironman4969]

brilliant thanks, perfect for my project.

[@PankajSharma-ch3bp]

Thank u....u gave me a brilliant idea 👍

[@erickwalker2499]

my congratulation for the nice idea. Parabéns, uma boa ideia, simples e eficaz.

[@clcpakistan4151]

Love you man you are a beautiful mind.

[@abdulmateen4126]

Very nice thanks for sharing your experience

[@mmb811]

Very cool easy way of doing it, thanks 😉

[@politicalcorruptiondiary]

Well done my friend.

[@ganaghasreenandhu8959]

Very good idea .

[@admiteco]

you are genius!

[@Mladen365]

Well thank you,i am helping myself with all this projects and help others to show them how they can make all that at home and not buy them,greetings

[@chanelmastuit386]

Thank you my Broooo... You save my Job today 😎😎😎😎

[@mohamedgomaa1993]

brilliant, great idea , thanks for sharing us.

[@jorgeleiva6411]

Muy Bueno Felicitaciones amigo

[@lanzkurt7917]

Great work thank you for showing your good tool👍

[@fredhayman1235]

Cool idea thanks for sharing

[@Bioruss]

Awesome idea thanks

[@Mladen365]

Thank you

[@75blackviking]

Nice work. Very good results too.

[@mathiaskurisa4841]

Excellent work

[@c.h.8660]

Very good !!!! Nice Video!!!

[@brmelectric]

Very good idea. Thank You for your time.

[@heldisdy1390]

Lovely Idea i w'll try to make one.

[@Mladen365]

Try,it is best tool i made,simple to use,each washer is perfect bend to make auger,greeting

[@joaorodriguesdesousa6699]

Very good. I like it very much.

[@dabradz]

great job & good video ...

[@Mladen365]

Thank you,greeting from Croatia