Vespa 125/150 Engine Rebuild 1959-1977

[@Topuesto]

Your vids are the Encyclopedia of Vespa, which means your work is part of Motorbike History. Thank you so much from Barcelona, Catalonia, Spain.

[@StoneCut]

I love your videos. There are many videos about certain aspects of engine rebuilds but none quite as concise as yours. Thank you so much for sharing! Greetings from Germany.

[@rizsisindra]

Just got myself a 1972 super and need to learn the basics. Thanks guys!

[@VespaMotorsport]

Awesome. Hope these vids help you get started. Good luck!

[@davidgallagher4942]

Thanks guys. I'm about to rebuild my 150 Sprint veloce engine and all the tips and tricks you have shown are a massive help. I feel reasonably confident I can get a good result....so confident in fact, that I am thinking of cooking some sausages on the burner, simultaneously, whilst heating up the crank cases. That has to be a greener use of the gas heat energy, right? You rock my world!

[@xperimental1974]

hello, do you have a clearance issue with the brass bushing of crankshaft bearings? In mine (150 Super), the clutch side brass bushing feels too tight, than the flywheel side. So it is very hard to install the crankshaft bearing into the crankcase even though I heated the crank

[@chriswarren2599]

Excellent work gents, thank you.

[@VespaMotorsport]

Our pleasure!

[@tndaniele1981]

Watching all the way from Australia. You guys are the best. So patient to record these videos. Much love!

[@VespaMotorsport]

Thank you!!

[@mcbg835]

Thank you guys for this! I really needed it to complete the restauration of my Vespa from 1960. Excellent work!

[@garethgerber4647]

thanks,....especially for remembering to mention the washer right at the end, i just rebuilt my motor but my clutch wont disengage,...and i know its because of that dam spacer.(i did find that spacer on the floor after i assembled the motor but didn't think much of it because i replaced everything, but i can tell you now there's nothing between the clutch and seal) i was concerned i forgot a step inside the motor, thankfully that's not a hard problem to fix. i wouldn't want to take apart the motor again. the motor runs great though. thanks again

[@yyyy9415]

Thank you guys for this! I really needed it to complete the restauration engine of my Vespa exlusive 2 from 2002.

[@glanco5000]

Fantastic video, thanks guys 🐝🛵💪

[@tomkemp3008]

Thanks for making these videos. Also, thanks for the solid parts supply and good service.

[@michaelsrensen2245]

Very nice and good help if you are a home garage mekanik............love it

[@tanagornc9407]

I love you Vespa Motorsport! :))

[@efendi171]

Well done and thank you for the tips and tricks. Keep gooing!

[@los_gasolinos]

This helps a lot! Thanks a lot, greetings from Europe!

[@macmcchesney]

Great videos! A lot of common sense ideas and build hints.

[@monegm7793]

A great clear video, thank you very much for doing this. made it look so quick and easy!

[@marcosluiz-wb4nq]

Aquidauana MS 🇧🇷🇧🇷🇧🇷🇧🇷👍

[@mackattack8627]

Love it 👨‍🔧🛵😇

[@YantsaSteve]

Cool..sir

[@feliix4013]

Guys really great video! You helped me alot with my restoration so far. But I'm having a Problem, I have the same motor like you with 2 big bearings, i cant get the halfes togheter until 1mm, Im heating alot and it still doesn't work. Are the bearings biting or could it be something different? Greetings from Switzerland!

[@wayanwirawan6391]

I love your video for old Vespa. I,m from Indonesia. I have Vespa super 150. My problem is the noise engine came on when clutch has pulled/grasped. When clutch released, engine sound back to normal. Clutch had been replaced with ori part but problem still exists. Any advise for my problem. Thanks...

[@fez3327]

Thanks this video showed me everything I need to know (I think) to finally re-assemble my VBB engine, and use the parts I got from you a couple YEARS ago. I've done flathead V8, Mazda Rotary, MG's, but not having the "special tool" that you show can be replaced with electrical tape, has me ready to roll up my sleeves. May I ask how "Robot" got his name? I see in another vid he has a back brace. Peace and thanks, from this Cornfield imprisoned Vespa tinkerer.

[@scooterboy37]

vespa gods

[@jupvan]

Good work, but why dont you freeze the bearings and heat up the engine , the bearings would fit without a hammer . I like your videos 👍👍👍 Greetings from germany 😁

[@dalesmart321]

How popular are Vespas In the USA, is there a big market for repairing them over there..

[@babercobaig9844]

Hi dear, i would be grateful if you could tell me about the rear baring puller tool.

[@alessandrocallegariturboevo1]

Buongiorno da Genova! Italia inanzitutto complimenti per la spiegazione anche se in lingua americana.. ho capito molte cose .. solo una vorrei chiedere.. il cuscinetto scomponibile (quello a rullini per intenderci) lato selettore cambio... Come si sostituisce? L'ho smontato ma non riesco più a inserire in sede quello nuovo!! Help me please!! 😭👍👍

[@ddcraun]

I was waiting for the tip about freezing the crank......lol

[@phungoc993]

My engine often make really loud sound . what can be the reason ? Thanks !

[@maksalminadzununis9639]

2021 hi sir I am from Indonesia, have a vespa vba 59 machine, how do I change the 3 speed to 4 speed what should be changed thank you 🙏🙏🙏

[@clirakis]

My axel bearing really doesn't want to stay in place, how does yours hold in place so well?

[@michealosruthain]

Worst method to install the main bearings, mine did not seat properly even though I froze the crankshaft and bearings assembly and heated the cases. It only takes a third of force to press the bearing on the shaft compared to the casings so do that last.

[@josepulido3701]

hice todo tal cual como ustedes y la moto prende pero no se mantiene encendida, y la unica forma que se mantenga encendida es con el aceleredor a fondo. que puede ser? o que puedo hacer?

[@muthukumarasan5136]

Kindly share bearings details of number and size

[@jehttsongelvez1669]

soy de venezuela y como hago para escuchar el español y soy mecanico de vespa y para aprender mucho mas sobre esas reliquias

[@diekzbikers2732]

Hy sir?i come from indonesia i have vespa exvlusive 1986...how make it fastest sir ???thank's before

[@wasimlewa7434]

My lml vespa engine will stall when I engage gear number one but when I remove the sideboard covering the engine it keeps on running.what could be the problem?

[@jamminjesus]

What if the crankshaft doesn't spin freely? When I close my engine case the crank will not spin. I have tried floating the crank as suggested. It is a brand new Mazzucchelli crankshaft from scooterwest.com. Could it be out of true right from the factory? My scoot is a 1968 Sprint Thanks

[@klocek5902]

Vespa cosa ma mokre czy słuche sprzęgło?

[@nw8000]

If the engine timeing port is damaged. How do you repair it??

[@zulfakarmahmud777]

Hi, how to rebuild tutorial engine vespa 1950, thx

[@basbusschers]

is the 177cc cilinder available for the vna1t?

[@user-sm8wo3dj5z]

Where to get the brass bushings for the main bearings?

[@VespaMotorsport]

scooterwest.com or give us a call, 619-280-1718

[@xperimental1974]

@@VespaMotorsport do you have the video about replacing the brass bushing? mine is too loose, so the bearing can be installed easily with fingers without heat needed

[@eduardoquiroga5783]

hey, can I work for you guys?

[@chayluu7098]

Xin chao ban minh co mot chiếc xe 50cc itali minh mua mai tu 50cc den mot 125 cc cung duoc ban co the giúp minh mua cai mai tu 50cc den 125 minh can mai xe

[@albertmikitarian9527]

i need your address to bring my scooter to fix

[@magedsaad8782]

تصليح سيات 133

[@Aikaramba12]

Shorten the videos please