vespa sip ROAD 3.0 vs POLINI box SOUNDcheck #38 / FMPguides - Solid PASSion /

[@farism403]

Polini box more vespa sound 👍

[@FreakMoPed8]

And now listen to this 😃 kzbin.info/www/bejne/nXXHm4CLn8iepdk

[@demplonice169]

which one has better polini or siproad 3 performance and endurance for daily use and touring on a vmc 177 stelvio engine?

[@FreakMoPed8]

sip road3 hangs quite low. polinibox doesnt have this issue and also has a nicer sound.

[@josemarisotomil9359]

I am thinking on upgrading my exhaust. Which is better between the 2 in regard to torque and sound? I have a stock engine. Thanks in advance

[@FreakMoPed8]

polinibox it is. sr3 also sadly has a quite small tailpipe diameter for a 200cc. just 17.5mm whereas ie polinibox has 20mm.

[@MarceloISB]

@@FreakMoPed8wich jet size you recomend for a stock engine px200 and polini box?

[@EddieEloff]

What do you think of the Mazzucchelli 60mm crank? 46005000 sip. with vmc 177. P150x

[@FreakMoPed8]

Top 👍

[@se7endays329]

Sorry just wanna know, do you removed the right centre stand spring? Cause I'm also using polini box, and the right spring centre stand is friction with the top side of the box exhaust.

[@FreakMoPed8]

I just change position of the springs. it depends on the main stand brand. good box first. main stands can be adjustwd

[@se7endays329]

@@FreakMoPed8 thank you 🍷🥃

[@nicholas12576]

Polinibox fits also on Cosa right?

[@FreakMoPed8]

not straight away: you need to move one holder kzbin.info/www/bejne/mKCWhalsh85qoKc

[@nicholas12576]

@@FreakMoPed8 Oder kann ich den einfach wegflexxen bzw umklappen? Danke für die schnelle Antwort

[@paansukarjo90]

hey is there any tips to remove the ridiculously long exhaust bolt? whenever I want to remove it completely I have to remove the tire first because the tire block it off.

[@FreakMoPed8]

Yes: remove the tyre 😄😉

[@paansukarjo90]

@@FreakMoPed8 lol.. that is the method, not the tips.. XD 😂

[@FreakMoPed8]

The tip is the right method 😃 You can open the front holder of the exhaust to the top so the screw can stay in the swingarm

[@totalnastetaaa]

Does the polini box need larger main jet on px200 ?

[@FreakMoPed8]

yes, use 2 sizes bigger for instance

[@totalnastetaaa]

@@FreakMoPed8 tnx i'll try that..btw love all your videos find them very usefull. Keep them going..cheers!

[@richardleedrums]

@@FreakMoPed8 What If I already upgraded to a slightly bigger carb (DELLORTO / SPACO SI26/26E) when I installed my SIP road 2.00. Would you still upjet after switching to Polini? The current main is 120... is 122 advisable?