VETERAN LYNX - How to Change the Tire (Disassembly)

Had to change the tire on the Veteran Lynx for the first time, so decided to make a guide video while i'm on it
Motion Pro Bead Breaker: amzn.to/4cSas6b
Buy your EUC here !
Ewheels: www.ewheels.com/?affiliates=725
eevees: eevees.com/?ref=sd7yx3w9
---------------------------------------------------------------------------------
Leaperkim Lynx (Canada): eevees.com/products/veteran-l...
Aliexpress Medium Seat: s.click.aliexpress.com/e/_DD8...
Bicycle Bell : amzn.to/4afmQvz
CAMERA Insta360 X3: amzn.to/3UFur1t
Honda Seat : amzn.to/3pGFOZp
Hand Mirror: amzn.to/3RBg9M8
Helmet Bell Sanction : amzn.to/3Rr3FGJ3
Micro sans-fil ULANZI U-MIC: amzn.to/3RpAO5V
Camera Dji Osmo Action 3 : amzn.to/3ttbYdb
Intercom BTS2 : s.click.aliexpress.com/e/_DdL...
Tubeless valve 90 degrees: amzn.to/40vzgKI
20A Charger: s.click.aliexpress.com/e/_DEV...
Sherman-S Bearings: amzn.to/3vhtxh1
Hi Vis Yellow Vest: s.click.aliexpress.com/e/_mNp...
Tactical Boots: amzn.to/4aTxEQ3
------------------------------------------------------------------------------
Support my Channel (Paypal) : www.paypal.com/donate?busines...

[@ElectrifiedRider]

Excellent tutorial! Straight and to the point. Playing the video in reverse to show the reassembly was genius. I will save this video for future reference. Cheers!

[@MathieuTechMoto]

Glad you you enjoyed , cheers !

[@kabosune9097]

Such a well made simple tutorial. Thanks for this! You make me even more proud to own a Lynx

[@MathieuTechMoto]

Thank you :)

[@kutvis]

ABSOLUTELY STUNNING! I did use baby lube and powder instead of soap, it was SO EASY!! Thank you!

[@MathieuTechMoto]

Glad i could help, congrats !

[@WheelerDje]

Bravo Mathieu, belle vidéo! Merci

[@MathieuTechMoto]

Fait plaisir !

[@nyconeroll]

Great video!

[@MathieuTechMoto]

Thank you, glad you enjoyed !

[@trowland9575]

Got mine on the way with street tire, will change to nobby soon, and this'll come in real handy!

[@MathieuTechMoto]

Both tires are great !

[@Vesataeuc]

You made it look so easy!! So good tutorial! It took me 1h to remove the tire from the rim on the v13!

[@MathieuTechMoto]

It always look easier on video, but it was not so bad, it too like 15 minutes to remove and reinstall the new tire

[@RunnerTides75]

@@MathieuTechMoto I just got mine a day ago. I notice you have an inner tube. I thought that the Lynx were tubeless or am I missing something?

[@MathieuTechMoto]

@@RunnerTides75 I received mine with tube i just converted to tubeless Shinko 244

[@mcfly_ev]

2:00 you don’t have to remove the motor bolts. It’s always been my philosophy that any time you can avoid it it’s safer to. Great video!

[@mcfly_ev]

You can remove the 4 smaller screws around the perimeter and the plastic part slides out.

[@MathieuTechMoto]

Thank you for the tip !

[@nanodude05]

such a well built wheel. cant wait for mine!

[@MathieuTechMoto]

Indeed !

[@RunnerTides75]

I just mine yesterday.

[@rkaid7]

3:34 - that’s right, apply that oil, but slower. Slooowwwwwweeerrrrrr Great vid.

[@MathieuTechMoto]

I'm sorry, i should have lit some candles with erotic music, damn why haven't i thought of that !

[@Dryoussefaa]

Hahahaha it took my 10 seconds to get the joke

[@TheSkinnyshowATL]

Damn bro you are the best

[@MathieuTechMoto]

Thank you !

[@T0rmented]

Just a heads up. Make sure you pull apart the correct side. I didn't realise that I did the opposite side to him in the video and the last two screws for the mud guard cannot be undone from the right side of the wheel. Now I need to reassemble and redo everything 😂

[@MathieuTechMoto]

I did that once, i was laughing of rage ...

[@fidy8dub]

I just found this out the hard way as well 🤦🏽‍♂️

[@neo3exe]

this is great for next time 🙂 I watched a different vid and they inserted the tube AFTER one side of the bead is in, that was hard on my fingers trying to get the valve in!

[@MathieuTechMoto]

That's what i did first, there's no way my fingers would have made it without being injured

[@RodneyLee]

The handle on the trolly doesn't need to be completely removed, only the side you are working on :)

[@MathieuTechMoto]

Thank you for the tip, i actually did that the second time

[@sby1076]

What a right time! My lynx will be here this weekend and yes I'm changing tyre... This is so perfect 👍 thank you :)

[@MathieuTechMoto]

Glad i've got the timing right !

[@RonnieRides]

Nice video but some critique, for important screws such as motor screws for example you need to apply Loctite and torque them to spec using a torque wrench, also need to be gentle screwing screws into plastic (and never use Loctite on plastic). The suspension clamp can easily dethread and you need to take great care torquing them bit by bit while making sure the clamp is straight.

[@MathieuTechMoto]

No need for torque wrench to unscrew, you probably didn't see that the reassembly is just the video in reverse

[@RonnieRides]

@@MathieuTechMoto for reassembly, of course.

[@MathieuTechMoto]

@@RonnieRides You are right, that's why i left a note at 5:09 :)

[@RonnieRides]

@@MathieuTechMoto I see, easy to miss, torque specs are not in the manual though, community got them from replacement screws provided by LeaperKim, not trying to be difficult with you, just factually correct, these things are important IMO 😊

[@MathieuTechMoto]

@@RonnieRides Thank you to help me improve my content !

[@naincarmona]

Thank for the nice tutorial! Why you went back to the nobby tier?

[@MathieuTechMoto]

This was for someone who want to ride in the trails

[@thierroue]

Bonjour Mathieu, c'est le pneu street L841 d'Ewheels? Alors tu préfères lequel comparé au Kenda?

[@MathieuTechMoto]

Oui L841 je cherchais justement le nom de ce pneu, si tu ne fais pas ou très peu de hors route prend le pneu street, il est silencieux, stable, maniable, et semble bien user !

[@neo3exe]

interesting, I didnt bother removing the mounting block that's on the rim cause afraid of ruining it, just the plastic bit that's on the outside

[@MathieuTechMoto]

I don't understand, how could you remove only the plastic ? as it's under the mounting block

[@neo3exe]

@@MathieuTechMoto yeah once you undo the screw to that plastic, it can just be pulled/pushed? and slide it out of the way

[@MathieuTechMoto]

@@neo3exe Oh maybe gonna try that next time, thanks for the tip !