How to take a tire off the rim/easy/safe/smooth technique

[@davycrockett4395]

I honestly don't need to read a single comment because no matter what anyone says this by far is the best method and its not even close. You are a genious and this video doesn't get enough credit. You have a new subscriber. Thank you so much bro!

[@samershammers]

Thank you so much

[@Rr100Swat]

Fr what this guy said

[@enrico5232]

Even cheaper. Few tools

[@mariatamayo6734]

Best video on KZbin...straight to the point ,no dumb music

[@samershammers]

Glad you think so

[@battoulm8513]

Can't ask for anything more from this video, simple topic, short and quiet to the point, excellent production quality, entertaining and informative. Thanks

[@samershammers]

I appreciate, thank you

[@NowhereMan-vm4nb]

Yes very nice, tip- top quality work!

[@Mattlawton-ft6ew]

​@@samershammersI just knock it off the rim no problem

[@NWSanta]

This is the smoothest tire bead breaking video I've ever seen. I HAVE to try this!! This would save a lot of money!

[@samershammers]

Glad you like it!

[@Funshorts-n7z]

This video saved my life all the rest of the videos on KZbin for tires don’t help at all your videos make me smarter 😅

[@samershammers]

Thank you

[@NextLevelAutoDiagnosticsLLC]

It's amazing how different minds tackle the same problem. I love your design. Easy to build too (no welder needed). Thanks

[@samershammers]

Glad it was helpful!

[@Kt-up7ei]

By far the best method to manually mount and unmount tires with simple hand tools. Excellent video. Thank you.

[@samershammers]

You are welcome!

[@jonofrye2394]

Thanks, this is the best video I've seen on changing tyres!!!!!! Simple and fast. Well done!

[@samershammers]

Glad you liked it!

[@martymcfly3986]

man, you are a genius. such a simple idea nobody ever thought of. thanks man!

[@samershammers]

Glad you liked it!

[@Mfenix79]

Good idea, I can now change my tires by myself. Thank you!

[@samershammers]

Glad you think so

[@hearditfirst8010]

Same

[@anatineduo4289]

That was awesome! I recall backyard tire changes with multiple guys, huge prybars... broken tire irons... this would have saved us... if only we'd seen this in the 1980s!

[@samershammers]

I am glad to hear that, thank you

[@flyboyslc1]

I have changed a lot of tires. You taught me a few new tricks!

[@samershammers]

Glad you liked it

[@battoulm8513]

Wow ! Haven't seen like this way on KZbin ever

[@amrsamer3428]

Same here

[@samershammers]

I am glad to hear that, thank you

[@khaoulamounhi2147]

Thank you, it was clear and up to the point, the tool is great as well👍

[@samershammers]

Great to hear!

[@clutchputt4640]

Changing trailer tires and tried breaking the bead 3 different ways. This was the easiest by far. Wish I saw this sooner. Great video ❤

[@samershammers]

Glad you liked it!

[@magnify2k446]

Everything explained amazingly and showed every step by step and great little jigs he made

[@samershammers]

most welcome

[@alanb287]

Thank you! What a great idea! I can't wait to try this when I get my new tire tomorrow.

[@samershammers]

Good luck! ..... if you face any problem tell me, I am happy to help

[@dalarali586]

I’m so proud of you 💪🏻

[@samershammers]

thank you

[@dineromarquiz6732]

Thanks, so detailed 👍

[@samershammers]

Glad you think so

[@alvaroescalante3923]

Probably the best video out there. Everyone else makes it complicated.

[@FatNebraskaMom]

Doing this this weekend. Thank you for this tool. Every other video Ive seen looks like it would damage the of out of the tire. Awesome video. ❤❤❤❤

[@samershammers]

Good luck!

[@AMC-eq3jr]

Natural, Humble, Creative, Original, Talented, and can communicate Simplicity. You are a genius, sir. Thanks for sharing and have a Great Holiday.

[@samershammers]

Thank you for watching

[@uowcagarazhy4754]

super video. Prawdziwy majstersztyk. Greetings from Poland, habibi. The best tutorial on the subject I've seen, and I've seen quite a few

[@samershammers]

Wow, thanks! HABIBI

[@livefree6878]

I think a lot of videos of people attempting to try to do this, this was the smoothest I never seen it done without super expensive machines, hats off👍

[@samershammers]

Thank you so much!

[@johnluliak]

After watching your video , and a few others. You guys gave me the confidence to remove my tire from the rim which had a bead leak on it. I was finally successful and cleand up the old rim and treated it with Ospho which is drying over night and then I can paint it all over before I put the tire back on. Thanks Samers!! It is for a wood splitter that I have restored. LOL

[@samershammers]

Good luck! Thank you for watching

[@daffyduk77]

brilliant video, no frills, no BS, just a lot of knowledge & skill passed on to us, thanks !

[@ammarakmaisha9215]

Very nice explanation 👌

[@samershammers]

thank you

[@auxpowerunit]

Your technique is really smooth ! I can tell that you thought about that a lot and have much experience.

[@samershammers]

thanks,

[@rasheedram200]

Thanks man, was helpful

[@samershammers]

Glad it helped

[@jayrenner1053]

I use the receiver hitch on my SUV as the weight. Scissor jack base is exactly like a wheel presser foot. Toss the deflated tire under the receiver, place the jack and give it a few cranks.

[@Gtagisfun-u6h]

Wow...I watched 4 videos of people using 4×4 wood and a vehicle, a scissor jack under a car and a floor jack with ratchet straps. Each one had me cringing thinking something horrific would happen. But this video with the wood form and rod with scissor jack is an engineering marvel that tops all I've seen. Good job!! I may go high tech with mine using a longer bottom wood to keep the complete tire level or add angles to that to keep it from rocking. This idea will cause me to stand the tire up, put the wood thru a spoke and lay it down level. We'll see how it goes?

[@JunkBondTrader]

Using your car to squash the edge of the wheel is actually really simple. As long as the tire is no good anymore.

[@samershammers]

Glad to hear that Thank you for watching.

[@walter.bellini]

What an excellent and VERY helpful video for those who don't have a tire machine. It is very kind of you to put together this video to help others Thank you

[@samershammers]

Glad you like it

[@dalarali586]

Amazing and congratulations 🎉

[@samershammers]

thank you

[@deanb3033]

Just pulled 4 tires off from steel rims tonight using this method. Thanks very much for the technique. I'm not however going to risk scratching my new alloys by installing. Don't trust my luck, so they're going to a shop 😊

[@samershammers]

Good luck!

[@RobinMiller-v6c]

Best no-nonsense video on this topic. Newbie here, done in 10 minutes. Thank you!!

[@samershammers]

Glad it was helpful!

[@roseek8373]

Thank, really a good way.

[@samershammers]

thanks

[@duane2344]

Truely one of the best videos I've seen. I wanted to replace my TPMS's and didn't have the money to spend on expensive tools. THANK YOU very much for posting this video.

[@samershammers]

Glad it helped

[@januosjan4959]

Het is echt een goed idee, bedankt en doorgaan 👍👌

[@samershammers]

thank you

[@malikixavier]

Thank you this is exactly what a video is supposed be again thank you.

[@johntheoldmod]

I made myself a bead breaker of a completely different design to yours and it worked a treat but I struggled to remove the tyre. you made the tyre removal look easy, I'm going to try your method of removal. Thanks for shareing

[@samershammers]

That's great! Thanks

[@northfolk6991]

Seriously, this is simply the best repeatable means of tyre removal. Thanks 👍

[@haithamshalashtv8377]

Nice job man Keep going brother

[@samershammers]

thank you bro

[@RogerPack]

Update: today my wife stepped on a tire with her heel while I stepped on the other side and it actually "just went on. : Whoa! ...I like the scissor jack thing! :) The hammer to get it off, be careful not to hit the rim...like I did LOL One of the better "ease of dismount" vids I've seen, thanks!

[@samershammers]

Glad you like it!

[@KP-bc5iz]

Tried it, and it works beautifully. You're awesome. The best I've seen on youtube.

[@samershammers]

Yay! Thank you!

[@Shadetree2]

your video is awesome! I watched probably 10 other videos and couldnt get the tires off. I watched yours and didn't have any problems! thank you!! this saved me $100💲💵

[@AKATONA1953]

Thank you, friend ! This is a real show or showing the real method in real circumstances. Good.

[@samershammers]

Glad it was helpful!

[@justinforsyth3427]

You are the man!! Fantastic instructional video thank you !

[@samershammers]

You're welcome!

[@troyporter3825]

You make it look SO easy...i cant wait to try it.

[@samershammers]

Thank you for watching.

[@peterevans8194]

Excellent video...Well presented with no fluff just easy to follow directions! Not to take anything away from your wooden frame idea, but I am always nobody has developed a large metal G clamp for doing this part...

[@samershammers]

Glad it was helpful!

[@ASEmastermechanic]

This is a great video, I watched dozens and this is very promising and very economical. Don't listen to all of these KZbin Monday quarterbacks. If they had great or better ideas, they would not be up on KZbin making negative comments. I was looking for a solution to avoid going to the tire shop to change out 4 tires. I also did not want to spend $100, or $200 on the Harbor Freight specials, only to modify it, use it one time every 5 years. Shade tree mechanics and weekend warriors buy these, not your professional shops. IF I build this and it does not work that great, its not like I am losing a lot of money. Its worth a trip to Menards. I even have a jack that uses a bolt so I can use my impact gun.

[@samershammers]

I'm glad to here that Thanks for watching.

[@jamies.2456]

This is absoluely the best video about this thank you!

[@samershammers]

thank you

[@halahamdani7520]

Wow! Makkelijk en nuttig! Bedankt 🙏

[@samershammers]

thank you

[@BarGolum]

This one of the best and more helpful videos I saw thanks you make it look so easy, follow your method really helps a lot.

[@samershammers]

thanks

[@testtest3434]

HEY! You invented something! YOu have one year form the date of this video to get patent. 2 Months?

[@samershammers]

glad to hear that thank you for watching

[@LeFraudHasChokedInSIXFinals]

Best tire mouinting video on KZbin!

[@shahidbaig43]

Very simple and easy to execute the change over of a tyre. Impressive

[@samershammers]

I am glad to hear that, thank you

[@marianalapiz12]

I subscribed for this man simple shared technique on how to change tire easily. I salute you bro.👍

[@samershammers]

Glad you think so

[@REK-cs4qm]

Good job man 🥇

[@maxtkach6915]

Nice job! I do this same way, 20+ years ago. 1. Your tire is soft, its more easy to do this. Try this metod with soviet old tires)))) or when you outside in winter. 2. Some time tire "glued" to rim wery strong and you must put the bar below the jack. Sorry for my english, greets from Ukraine.

[@samershammers]

Thanks for the info! for Some time tire "glued" to rim very strong and you must put the bar below the jack. please watch the video to the end will see how ? to take the glued tire off the rim.

[@EdwoodCA]

Just stellar! I've just watched about 8 videos, and this guy gets it. And makes that wood frame and bolt setup to do it better, and more accurately than driving a car onto a long 4"x4" piece, or to struggle too long with screwdrivers without using that small block of wood for leverage, etc. Some forget to use soapy water. Others forget to put something down to protect the face of the alloy wheel. BRAVO!

[@samershammers]

Glad it was helpful! thanks for watching

[@SteveSaunders-d8v]

Best diy method I’ve seen well done

[@pauln119]

Best method I've seen to date, but instead of wood, I'm going to use some 80/20 aluminum that I have lying around.

[@samershammers]

thanks

[@stevephone4957]

Excellent training video Sir, I thoroughly enjoyed watching it and it has already given me ideas how to change or fix punctures on my ride-on mower tyres. Nice to see you are still using the old Black and Decker Workmate at the end of the video. I still have mine also but I really need to change the wood and I have no idea where the plastic inserts have gone. :) Thankyou.

[@samershammers]

Thanks' for watching

[@paulopalma-condesso]

Thanks. You build a good and cheaper tool. I've learned how to take/put a new tire.

[@samershammers]

Glad to help

[@dogbitefred6631]

Excellent video, no BS just useful information. Thanks for taking the time to make the video, I really enjoyed it and will put the shared info to good use. I also subscribed.

[@samershammers]

Much appreciated!

[@thingshappenin]

Best video I've seen to remove and reinstall tire

[@anmolsamra0071]

I love how you explain everything ❤❤

[@TheGNexus]

Great video! I'm now going to replace my bad TPMS sensor myself and save some money. Thanks!

[@samershammers]

Good luck! Thank you for watching

[@hearditfirst8010]

Same

[@rwarts5150]

The soapy water is the missing key. thank you Sir key master 👍👍seriously thank you

[@samershammers]

thanks for watching

[@GilMcGillivary]

How do you balance the tire?

[@stevenwu78]

very clearly and detailed demostration, simple but usful tools. Thank you for sharing.

[@samershammers]

Glad it was helpful!

[@Jodyrides]

very slick, I would like to see how to do that on a modern motorcycle tubeless mag wheel with a motorcycle tire. Those are the ones that are tough, especially if you use a Z rated or V rated radial tire, 60 or 70 series. can this be done while the brake discs are still attached to the wheel? That is how I do it using a Plastic milk crate and I usually have to use three tire irons and rubber lube, not dishwashing liquid, because dishwashing liquid has LYE in it, which is corrosive to aluminum

[@BimalNandanaJayawardene-r1d]

Great job with simply explain .thank you very much for knowledge sharing and keep up the good work .

[@josenieves2469]

You are a GENIUS! I have the same tire i need to change the valve stem. That would definitely work. Thank you.

[@samershammers]

Glad to help

[@Gr33kChief]

Protect this man at all costs

[@frankmurphy4713]

Thank you for your video I built the frame and changed my front tyres from old ones to new ones many thanks great video

[@samershammers]

Glad it helped, nice work

[@richarddiaz8248]

I did it YES thank you for your support and knowledge

[@roseek8373]

Gemakkelijke en snelle , amazing 👏👏👏👏👏👏👏

[@carson8418]

Worked for me! I was able to dismount 4 large truck tires by hand with minimal profanity.

[@samershammers]

Glad it was helpful!

[@dash4177]

ABSOLUTLEY EXCELLANT VIDEO TUTORIAL SIR! So many clever people out there in the world that can think there way around a problem and come up with an answer...Well done first class AAA+++

[@samershammers]

glad to hear that thank you for watching

[@seirrafavory5041]

Thx brother for this vidéo 📼 👍👍👍👍💞👀👀👀

[@samershammers]

My pleasure

[@stevensteel8617]

Thank you my friend. Namaste. This is a great technique.

[@samershammers]

Glad you enjoyed it!

[@niconoypirynn]

This is the clearest instructional video. I appreciate your contribution. I , however, have a question with "make sure the valve is facing the front". What does it mean?

[@samershammers]

if the valve was facing you when you push the tire down it will block the tire bead from going to the rim groove then you will not have enough room to get the tire off.

[@JockeyCake]

Thanks mate, looks like the life is easy with your tips

[@tlo35]

Very good idea. 👍

[@samershammers]

Glad you like it

[@williamh6547]

That is genius 😎, thanks for the video

[@samershammers]

Glad you liked it!

[@normanbfifteen3468]

simple and genius... just a question. What is the purpose of the top horizontal wood piece of the bead breaker wooden frame

[@samershammers]

Thanks for watching, extra support, hold both stands when apply pressure, the tool will last more

[@darrell6642]

This is awesome. Thank you for this video.

[@samershammers]

Glad you liked it!

[@moshazza5684]

Hi great idea. Any video showing how to make that tool

[@samershammers]

Watch the video until the end. Thanks for watching.

[@thecrowsblow]

Nicely done. A good original looking idea. I may try to use a bottle jack, but thank you for the ideas.

[@samershammers]

Go for it! Thanks for watching

[@solosamp1106]

Thanks man, this worked perfectly. I modified your design a bit, using 2 M6 threaded rods as side columns because I didn't hace wood long enough, and putting two big pieces of wood on the top and the bottom (without threaded rod there, but my jack is a bit different to yours), worked just as well, and can be taken apart pretty fast :D

[@samershammers]

Nice work! thanks for watching

[@robstevens9667]

Very helpful, thank you 🙏👍

[@samershammers]

Glad it was helpful!

[@hoavan68]

You teach the world your way!

[@samershammers]

thanks for watching

[@LondonCarnaval]

Great idea 💡 👍 👏 👌 Thanks 😊 👍 🙏

[@samershammers]

Most welcome 😊

[@mikimiki195]

Wow this is great idea Thank you 🙏🏻

[@rodcameron6648]

great video thanks for sharing can you tell me the thickness of the wood and the rod.

[@LohPro]

i built this with 2x4s & a 3/4" threaded bar from Lowes. it popped the bead on my 275 60 r20 wheels that have been together for over 10 years

[@GJ145-r1w]

Great video. Whats the diameter of the threaded rod?

[@skovieldboross50]

Attentive to details 💯

[@solwaysandsRC]

Absolutely Brilliant!

[@samershammers]

Thank you, I am glad to hear that.

[@Jodyrides]

I changed many hundreds of tires on a manual tire machine when I worked in a gas station/service station after school and during the summers when I was in high school in the late 60s. I ended up buying the manual machine made by coats and the atlas, certified stylish, floating and 90 weight gear, lube, tire, balancing machine/bubble balancer. I’ve used those until car started coming with aluminum wheels. I could not use my manual tire machine on aluminum wheels, because it will scar the wheel all the way around the edge of the rim while using the stylus type official type tire irons, which make it very easy to get the tires on or off the wheels.. so I have changed many many hundreds of tires, I even worked on tires back before tubeless tires were common. So I had to contend with inner tubes when people would come in to buy new snow tires or have a flat tire repaired. The main thing is the machine must be solidly mounted to the floor. That’s half the battle. you can get the 1st half of a Tire on the wheel without using any tire irons just using brute, force, and your hands. Getting the tire bead into the well of the wheel is the key, the second half of the tire is the tough part.. as I said, it is important that the tire machine/stand is solidly mounted to the ground somehow. forcing the tire on to the wheel, getting the bead down into the well of the rim is a little tougher on the second half of the tire install, but the last 90° is the tough part that you really need a tire iron for.. same story with a motorcycle wheel, getting the first 90° off the wheel is the tough part, and getting the last 90° of the second half of the tire on the wheel is the tough part. Keeping the tire bead in the well of the wheel is the key to making the job easy… I noticed in one of your other videos that you are standing on the wheel. That is the key. Just like having the tire machine that is simply holding the wheel in place must be solidly mounted to the ground or you will just be moving the tire machine around your shop floor if it’s not bolted to the ground. I still have my old coats manual, tire machine, and the tools for breaking the bead, and a very special tire irons that are about 4 feet long with the stylus on the end for sliding the tire on the wheel, which makes it so much easier. I could do the job with just higher irons.. When removing a wheel, the main thing is to have the tire bead broken free from the wheel on both sides… I was using my manual tire machine on my wheels, my wife’s wheels, my mother and sisters wheels, my father-in-law and mother-in-law‘s wheels, and later, my three kids wheels, every winter to remove the summer tires and install the winter tires here in Pennsylvania. Then in April, I had to remove all those tires from all those wheels with my manual machine. i’m happy today that pretty much everybody has either a four-wheel-drive SUV or a front wheel drive car that uses all season tires.. that was a lot of work when I was younger every December and April. If you know the basics on how to remove and install a tire onto a wheel, getting the beat down into the well of the rim, and making sure the beat is broken free of the wheel when removing tires, you can change just about any tire.IF You can get the wheel to hold still

[@samershammers]

Thank you for watching!!!