Veto Pro Pac Tech MCT Loaded Out Tool Bag for Electricians Hvac Handyman Mechanic

[@3vil3lvis]

Those empty front pockets are great if put a huge fishing magnet in them, it's like having a built in magnetic parts tray.

[@TonyTheTechnician]

That's not a bad idea. Thank you

[@ljordan3680]

Great idea

[@dalebabbitt6185]

You're like a kid at Christmas. Good for you!! I so want a Veto!! What a quality bag. Enjoy it!!!

[@TonyTheTechnician]

Hahahaha you are right 🤣👍 I have wanted one for along time and really glad I finally decided to just get one. It's been great so far

[@dalebabbitt6185]

@@TonyTheTechnician I gotta sneak one into the garage so the wife doesn't see it. This is all your fault 😃, thank you!!!

[@TonyTheTechnician]

​@Dale Babbitt hahaha put a piece of tape over the name and write kobalt on it. Boom now it's a $40 bag 😅

[@juice992]

Nice, I’m looking to put together a little tool bag to keep in the trunk of the car for emergencies. I got some great ideas from this video 👍🏽

[@TonyTheTechnician]

Very nice. That's a good idea. Glad the video was helpful. Thank you

[@jeffreyesguitar5129]

That's what I'm doing right now

[@roysoto9824]

Nice love the pack has alot of useful tools that can be used for alot of others things and nice selection for electrical work

[@TonyTheTechnician]

Thank you 👍

[@gareththompson6628]

Awesome set up, no better tools than sentimental ones..im 43 and have tools my father passed to me. I wouldn't swap them for any new gear

[@TonyTheTechnician]

Thank you and absolutely agree

[@gnarwhal2642]

Load out is looking good. Only suggestion I might have is to include some PPE ( eye/ear pro and some gloves). Your first video on the veto bags convinced me to get the MCT over the MC.

[@TonyTheTechnician]

Very good suggestions. I have gloves but eye and ear protection is a great idea. Thank you. And ya I almost went with the mc as well and decided to spend the extra 20 and get a little more room. Hope you are enjoying the bag as well

[@georgeferlazzo7936]

Hello again Tony Thank you for another Great Video 👍 Looks like a great idea. Normally I use just cheap bag to carry enough tools for the job I 'm working. Then everything gets put away and accounted. Nothing lost or missing. I can see this being useful. Again thank you 😊

[@TonyTheTechnician]

Thank you and ya I used to do the same thing which worked great bc it wasn't very often I had to do that. Now I find myself working more often a2ay from my garage so it's worked well for me so far. Thank you again for watching and commenting. I appreciate it!!

[@jeffreyesguitar5129]

How old was your great grandfather? Those tools look so modern.

[@TonyTheTechnician]

He passed away 2 years ago only a few months before his 100th birthday

[@marko11kram]

Interesting. I picked up the Veto TP5B Clip-on Service Tool Pouch back in December to 'finally' have a super nice grab and go bag. Your bag has more capacity, so you can be more liberal with your choices. Something I was suprised I did not see in yours was the Knipex Pliers wrench. I also find the compound long reach angle reach needlenose pliers, cheapo Crescents, but workable, come in handy often enough that they are a part of that bag Many of your other choices though are similar to mine. I think I will grab that zip tie holder, It looks handy Fun video, thanks

[@TonyTheTechnician]

Thank you and I do have the pliers wrench in the bag. I actually forgot to show a couple of things. My apologies. Glad you enjoy yours as well. Thank you for sharing and for watching

[@draffa5798]

Nice setup. You definitely were able to fit a lot of tools in it

[@TonyTheTechnician]

Thank you and ya more then I expected. I was surprised

[@owaisakhter2673]

If you are electrician then I think you should choose Fluke 117 which is nice for electricians. But you purchased Fluke 115 which is the same except two more options Volt Alert and Low impedance test feature which is checking stray voltages in adjacent non energies wire.

[@davidwalle5025]

Good video lots of tools in a small location

[@TonyTheTechnician]

Thank you and ya that's for sure lol

[@tedmcdonald3377]

Very nice Tony 😎🛠️😎🛠️😎

[@TonyTheTechnician]

Thank you 👍

[@tedmcdonald3377]

@@TonyTheTechnician I've been debating which bag to get, and your video convinced me to get the Tech-Mct, thanks Tony💪💪💪

[@TonyTheTechnician]

​@Ted McDonald no problem at all. Really glad it was helpful

[@boosted2.4_sky]

BIG T...LET'S GO BROTHER 🏁

[@TonyTheTechnician]

👍🤣👍

[@MORGANSMaintenance]

I really like this bag out of all the Vetos I’ve tried. Nice Loadout 👍

[@TonyTheTechnician]

That's awesome to hear. Thank you

[@mbforwood251]

Great video ….in your Railer bit holder what brand 1/4” quick release socket adapter is that please? Fix perfect, may purchase one - thanks Tony!!

[@TonyTheTechnician]

Thank you. Haha good eye. That's one of my favorite impact driver attachments. It's from klutch at northern Tool. It's been a beast. If you can't find it at Northern Tool you can also find them sold by titan I believe. amzn.to/3K8RpqS I believe they are the same

[@mbforwood251]

Thanks, I would prefer the Klutch brand but can’t seem to find it on Nothern Tool, will look at Titan. Thanks for the reply - hope your doing well, my friend!

[@TonyTheTechnician]

@MB Forwood ya I was looking for another set like a month ago and couldn't find them either. I have been well thank you. How have you been

[@blairwilson9272]

Isn't that a gen 3 impact? Like the flex head 1/4 ratchet

[@TonyTheTechnician]

Yes it is. Sorry if I said something else.

[@arnoldramos39]

Tony the bag will definitely last you the rest of your life " IF " your willing to replace the zippers. Other than that, the bag is like a Sherman tank

[@ssranch6662]

Nice!! I love the layout. Btw how have you been?

[@TonyTheTechnician]

Thank you I appreciate it. I've been good just figuring out work stuff and waiting for some nice weather. Good to hear from you. How have you been?

[@ssranch6662]

Yeah the wind has been nuts. I'm good just working a lot of hours lately.

[@TonyTheTechnician]

@S&S Ranch oh ya same here. I came out yesterday morning to my 8 foot grill table on the other side of the patio. That thing has never moved so that was surprising to me

[@synthetictruth671]

I have 3 diffrent flatheads and a 11 in 1, gots to have the assorted pry bars plus the crow bar and chisel😂😂😂

[@jeremyTallen1]

Nice!!!

[@TonyTheTechnician]

Thanks

[@narutobroken]

Every tool looks brand new never used

[@TonyTheTechnician]

Lol well considering 70% of them are less then a month old I suppose that would make sense 🤣 lol didn't you hear me say that in the video

[@dewaltman4582]

You need to add some screwdrivers in that bag.

[@espressomatic]

Nice loadout. WRT to the video, lock your focus next time. The focus tracking is crazy and disorienting

[@TonyTheTechnician]

Thank you and Ya I noticed that I was so upset when I was editing the video. I'll definitely do that next time. My apologies

[@clkersting]

In my opinion, too many wire strippers, among a few other items. Overall, very nice!