Here is the Loadout of the TP4B seen in this video 😊 Don’t forget to subscribe for more awesome tool content!!! kzbin.info/www/bejne/hIXGgGSgftmDmrs
@zacharuk273 жыл бұрын
Quality tools means you take pride in your work. I'd hire you!
@MillisConstruction3 жыл бұрын
Love every minute of it, well almost 😅 Thanks for watching!
@pointbreak82933 жыл бұрын
All them tools look brand new. Nice tool bag tour... 👍👍👍
@MillisConstruction3 жыл бұрын
They absolutely are 😁 I didn’t want to take much of anything from my other bags so I ordered all new for this set up. I’ve been using it ever since and it’s about stopped the use of the TP4B and the Tech MCT other than more specific jobs. This has been a great setup. Only a couple things have been changed since this was shot. Thanks for watching!!
@stevendouglas38603 жыл бұрын
They are clean tools 👋👋💪 Love wera , veto . From Liverpool UK England.
@guydesnoyers84173 жыл бұрын
A finely curated work bag! You mentioned a "square drive" screwdriver - I believe that's a Robertson (versus a Philips). Robertson is the standard up here in Canada. I had watched a documentary on the race for screwdriver patents - really interesting stuff, would recommend. Thanks for the share!
@woodlandspartan52263 жыл бұрын
From the history guy?
@guydesnoyers84173 жыл бұрын
@@woodlandspartan5226 yes, I beleive so! He pits out some great content. 👍
@christopherbrown64933 жыл бұрын
Those alligator clips have saved my butt a few times diagnosing industrial pumps, night time by myself trying to figure out why an essential pump is not working, going side to side of the engine, clamp them on and lay the multimeter where I can see it and go to the key and see what voltage I’m getting while starting.
@danstoolroom77003 жыл бұрын
Your videos get better and better I love them. I'm really quite pleased to have you as a subscriber as yours is one of my favourite channels and we have very simular tastes in tools. Also your collection is immense
@MillisConstruction3 жыл бұрын
Really enjoy yours too! I’m usually one of the first watchers I think 😁 You’ll have to check out the next one that I’m almost to post, I took it up a level hopefully!
@danstoolroom77003 жыл бұрын
Thanks mate do you use linemans pliers at all?
@chrisfyfe92123 жыл бұрын
You Sir a Man of taste , I’m a fellow Veto addict !
@SusiesRepeat3 жыл бұрын
Me too also a Wigan tool nut and of cause Knipex.
@SusiesRepeat3 жыл бұрын
I meant to say a Wiha and Knipex tool nut but was corrected to Wigan for whatever reason.
@TheDurbinCompound3 жыл бұрын
I’m hooked! You’re the man! I’m over here buying stuff now, thanks for recommending tools I didn’t even know were around!
@MillisConstruction3 жыл бұрын
Awesome!! What ones did you like??
@TheDurbinCompound3 жыл бұрын
@@MillisConstruction the way I found your channel is because I was looking at the TP-XL or XXL. So I’m definitely getting the XXL for meter bags like you mentioned. I love the flame sensor tool, I’m a big fan of Wera but not familiar with their entire line so I’m going to probably pick up that large bit kit. I am an NWS plier fan as well! Watching more of your videos now. Just ordered the Basin Buddy. I have been using a standard basin wrench for years.
@joshuat27513 жыл бұрын
I've quickly out grown my TP4 amazing little bag and absolutely love it, but finding my self buying more and more tools to carry with me lol. Amazing review
@knifeISknife2 жыл бұрын
Thank you for Sharing. Great BAG. 👍 Dirk
@MillisConstruction2 жыл бұрын
Thanks for checking it out 😁🔧
@AB-jm3iu2 жыл бұрын
Excellent tools, they look spotless (unused).
@MillisConstruction2 жыл бұрын
Thanks a lot! They work hard but I take excellent care of my gear. 😊
@darinbassett4072 жыл бұрын
Love your videos and love me some Wera! Keep up the good work
@jasonrucker31433 жыл бұрын
I have a Tech MC and love it for maintenance work and call outs but I want a smaller bag for just call outs
@gpraceman2 жыл бұрын
Kobalt makes a set of shears like the ones you showed. I picked up one at my local Lowes.
@_cosmoscamping3 жыл бұрын
[W]=[B] German !! Nice tool.
@JacobGoolsby-UFC5 ай бұрын
Veto is the best. I’ve got 12 of them myself
@drewmueller3913Ай бұрын
Just some constructive criticism here. No matter what kind of work you do-carrying a huge bag of tools around is something almost nobody does. I've been in the electrical trade all my life. We carry a few tools around in a tool pouch along with connectors. Some of the new guys started out with huge bags and quickly learned to pare down to a workable size. In retirement, I go rv'ing and have a couple of small tool boxes. One holds mostly electrical related tools and materials and the other has plumbing stuff. Over the years you get to know which tools you use 90% of the time.- Much easier to manage and use. I enjoy your videos about nice German tools.
@MillisConstructionАй бұрын
Agreed, most of the time my larger bags either stay in the truck or get set in a central location in the jobsite to work from. Then I’ll load a job specific thing like the TP1 or 2 pouches and get to it
@jonathanrijosАй бұрын
i carry a whole pack out lol
@drewmueller391324 күн бұрын
@@jonathanrijos You'll be carrying a bad back and knee trouble later on.
@manuzach3 жыл бұрын
The wera ratchet screwdriver is the only screwdriver I have - does it all! Happy new year
@MillisConstruction3 жыл бұрын
It’s pretty awesome! Really tempted to get their new turbo version too
@fransiscoscaramanga6743 жыл бұрын
nice video...................i see alot of wera tools, i happen to own a few wera screwdriver's myself. good stuff......
@mumbles1justin2 жыл бұрын
I know no one has ever talked about why wera hex keys SAE only comes in pouch and metric comes in a rail. But the SAE pouch is designed to have the metric rail set fit inside the SAE pouch so metric and SAE store all together.
@Android_Warrior3 жыл бұрын
I had the TP-XL and gave it away. too small for my cordless that I like to carry inside. got the TP-XXL and that one is a game changer for me.
@MillisConstruction3 жыл бұрын
Which cordless are you carrying? I agree. I can’t even put the Milwaukee 12v surge inside this one. It has to be on the outside banging into everything 😑
@Android_Warrior3 жыл бұрын
@@MillisConstruction : Bosch
@michaelmartin59953 жыл бұрын
Nice load out... Sparkey Channel’s channel is good stuff!
@MillisConstruction3 жыл бұрын
Was a shame to see him have to rebuild it but he’s coming back fast!
@scottaddison8071 Жыл бұрын
I enjoy your videos
@MrDaveS614 ай бұрын
Just curious…..how is the impact driver attached to the bag (TP XL)? Couldn’t tell from the video. Thanks
@Jackcc52 жыл бұрын
hey 👋 thank you so much i appreciate your video
@MillisConstruction2 жыл бұрын
Thanks for watching 😁🔧
@HardHeadMilitary3 жыл бұрын
I own the TP4B and it is nice. I also own the smallest pouch, I forget the name of it. Im considering a back pack from Veto. However seeing this, I may go this route. Nice tools as well. I use Knipex, and Im heading into Wera and Wiha with a few tools now. I may give Felo a go also
@TimboCruz2 жыл бұрын
Amazing load out. Have you ever come across or used Nepros ratchets? I picked up a few for bike mechanic work and I will never use another brand again.
@MillisConstruction2 жыл бұрын
I haven’t purchased any, definitely heard good things about that brand though. I don’t do a lot of mechanic work other than minor repairs so I’ve not heavily invested into mechanic tools really yet. I probably should!
@m23cbs2 жыл бұрын
Fix-it Ned Flanders is my favorite anime character
@MillisConstruction2 жыл бұрын
I keep hearing this, I’m going to have to actually go watch some of that one day 🤣
@joep41433 жыл бұрын
Sorry Klein for screwdrivers. Klein for linesman, side cutters and strippers. Channel lock code blue for adjustable wrenches. Knipex for water pump pliers.
@MillisConstruction3 жыл бұрын
I just don’t use adjustable wrenches anymore at all. The Knipex pliers wrenches were the final nail in that tool for me. I have some in my trailer but I’m not sure when I used them last.
@drewmueller391324 күн бұрын
Pittsburg for vice grips, Chicago Electric for corded 3/8" drill, Doyle for 20" slip joint pliers, Warrior for cordless. Keep the savings $ for burgers and cocktails!
@speednahead3 жыл бұрын
Love veto. Great video.
@edsonjosesantos43473 жыл бұрын
Amazing tools!👏👏
@MillisConstruction3 жыл бұрын
Thanks for watching 😁
@danstoolroom77003 жыл бұрын
Nice mate have you seen the new bags coming out the tpxxl and the wheeler
@MillisConstruction3 жыл бұрын
I sure have! Are you trying out any of them?
@danstoolroom77003 жыл бұрын
@@MillisConstruction klein have just send me their master back pack which is a very nice back so no need for the wheeler the tp xxl does look good though I must say
@MillisConstruction3 жыл бұрын
@@danstoolroom7700 I really hate to say it but the meter add ons are probably going to make me get that one and upgrade from this one. They look way too handy to ignore! This is my favorite veto bag so far so making it even better is hard to turn down. Is that the video you did on the backpack you have or is that another one that’s coming up? I need to go check it out
@danstoolroom77003 жыл бұрын
@@MillisConstruction hi mate it's one coming up at present klein are waiting for stock from the USA to the UK so have sent me the bag but asked me to hold off on the review. Its something pretty special though so I'm dead excited to review it. It's kleins flagship backpack and I really love it. I don't know if you use Instagram but if you follow me on there, there are a fair few pics of it
@danstoolroom77003 жыл бұрын
Also I agree meters are a pain to find space for so that it what drew my attention to it as well.
@stephenmarshall20393 жыл бұрын
Great job
@SusiesRepeat3 жыл бұрын
Love that you do not have any lengthy bull shit intro. Keep it up.
@edvardschock97393 жыл бұрын
Great vid buddy. I have the same problem my TP-4B is too small, and my LC is too big. I need something between. Looks like this is the solution. Also, where did you get that flame sensor cleaner? Thanks
@MillisConstruction3 жыл бұрын
Thanks!! Also be sure to look at the TP XXL before you order this bag if you need meter pouches and just plain a little more room even than this one. I’ll probably be at least trying that one out soon to see if it works out better. Here’s a link to the flame sensor cleaner: amzn.to/2PogG8h
@kierankelly65152 жыл бұрын
Can you do a veto TP-LC Loadout for electricians
@MillisConstruction2 жыл бұрын
I actually have a TP-LC Loadout here on the channel! I believe I posted it maybe 2-3 weeks ago? If you need a link just let me know 😊
@kierankelly65152 жыл бұрын
@@MillisConstruction please can you sent me the link
@@MillisConstruction Thank you. Love your Chanel and content! Keep up the good work.
@vpnguyen13 жыл бұрын
Great video. Can you post the link to get those fluke leads? Thanks!
@MillisConstruction3 жыл бұрын
The twist tip leads are here on Amazon for $34.99, amzn.to/2OlNIFt That is an affiliate link, so we do earn a commission if you click it, or you can search Amazon for Fluke Silicon TwistGuard Lead Set 😊
@jerryjackson77873 жыл бұрын
What is the model number or part number of the nice Fluke silicone leads you showed at about 1:30 to 1:40 in the video?
@MillisConstruction3 жыл бұрын
This is what they are: Fluke TL175E TwistGuard Double Insulated Silicone Test Lead Set I love them. Around $35 I believe
@GeoffreyCharlesK3 жыл бұрын
How do you drill holes? Hex drill bits for your impact?
@MillisConstruction3 жыл бұрын
Yes I have an impact rated set from Dewalt that I’ve been using. Anything serious though and I go to my DRLC drill bag for the Festool drill and normal bits.
@bouchikhilarbi36412 жыл бұрын
Germains tools is the best
@coreyfenton36183 жыл бұрын
Love the vids
@MillisConstruction3 жыл бұрын
Thanks for watching 😁 Happy New Years!!
@MarkJones-no2zf3 жыл бұрын
Check out the veto tp xxl. I ordered mine 3 months after purchasing the tp xl
@MillisConstruction3 жыл бұрын
I’m definitely planning on getting one. The meter add ons alone seem worth it!
@MarkJones-no2zf3 жыл бұрын
Yes that is the reason i.am getting one. To free up space in bag for a few more tools I left out. I do hvac. I do wish they would come out with a tool pallet that would hold 9 11 piece wrench set I use open end wrenches a lot adjustable never seams to fit in where I need it. Also people there before me don't know how to use adjustable a round off the nuts
@revg26083 жыл бұрын
Dude... I’m going broke keeping up!!!!
@MillisConstruction3 жыл бұрын
It’s a big club 🤣🤣
@tullywebster14173 жыл бұрын
Yo them cobwebs on your hat!
@MillisConstruction3 жыл бұрын
Yep! All day fixing gas pipes in a basement lol, couldn’t get em all off!
@miki47582 жыл бұрын
How heavy is this bag tp xl with all the tools? Thanks
@MillisConstruction2 жыл бұрын
I weighed my TP-XXL this week and it was 40.5 So the XL would be minus the meters and a handful of other things. Probably right at 32-35
@miki47582 жыл бұрын
@@MillisConstruction Thanks man 👍
@miki47582 жыл бұрын
@@MillisConstruction Not very light on the shoulder if it is about 32 pounds is about 15 kg 😅 or I'm wrong?
@MillisConstruction2 жыл бұрын
@@miki4758 not at all! For light id definitely look more at the TP-LC most likely.
@SqwarkParrotSpittingFeathers3 жыл бұрын
Can someone please tell me what you use the ball ends on the hex/wera keys for?
@MillisConstruction3 жыл бұрын
They allow you to angle the wrench while using it, instead of being stuck with only using it straight into the fastener.
@SqwarkParrotSpittingFeathers3 жыл бұрын
@@MillisConstruction thank you, so it is essentially the same hex as the other end only with the ball/angle ability?
@markwilliscroft34103 жыл бұрын
Very hard to use normal hex keys after having the ball end ones, yet to try the wera but will be amazing
@MillisConstruction3 жыл бұрын
Yes it is.
@SqwarkParrotSpittingFeathers3 жыл бұрын
@@MillisConstruction thanks guys, but, why not just the ball hex and then something else on the other end. Seems like a waste of one end.
@franksuhuang62 жыл бұрын
👍👍🌹🌹
@h.a.sparky9843 жыл бұрын
Looks like you've never worked with those tools they're all brand new
@MillisConstruction3 жыл бұрын
These are new, my TP4B and Tech MCT have my daily use tools. These were all purchased over Black Friday to create a new bag setup to try out. If you’d watched any other videos you’d know that 😜 It’s also right in the title lol
@h.a.sparky9843 жыл бұрын
Lol, I was just getting jealous of that I can't keep my tools that that clean.
@MillisConstruction3 жыл бұрын
@@h.a.sparky984 Haha I hear that! I can’t either 🤣 I do try and thankfully I’m not a mechanic, carpentry and remodeling isn’t quite as greasy as some things
@heretolevitateme2 жыл бұрын
Are you really telling a guy with cobwebs all over his hat that he doesn't look like he does work?