VEVOR 110V Spot Welder Dent Puller

Amazon Associate Links:
As an Amazon Associate I earn from qualifying purchases:
VEVOR 110V Spot Welder Dent Puller: amzn.to/3PR6Bve
3000W Stud Welder Dent Repair Kit, 7 Models Spot Welding Machine for Car Body Dent Repair
Check Out My Amazon Influencer Storefront Here:
www.amazon.com/shop/influencer-3d5216d6
Check Out My Main Channel Here:
/ @distractor_beam

[@diyautoland4960]

I have just bought one of these to do a Mini and a Fiesta. Even as a beginner I got excelent results first time.

[@MrCbell57]

There is no way to connect the ground. What kind of machine is this with no instruction no ground and no way to fasten the ground to the body. Sending it back.

[@joshdaniel7894]

People Chuck the normal ground clamps in trash cause they suck so this wasn’t included. But if you can’t figure out harbor freight or tractor supply sells on that screws on you should be sending it back

[@JBFromOZ]

By using the ground and the welder without the collar wound in, the ground becomes the first weld point to attach to the plate. Once the ground is spot welded to the vehicle panel, you tighten the round collar down to the plate which reduces the contact resistance at the ground connection, and further spot welds will occur at the target electrode. It works really well in practise.

[@PhillipHall01]

Thanks for the video. These things use to be unreasonable high priced when they first came out. Now, this model is affordable. I actually built my own because of those high prices. Mine works very well. If this one had been available I would have bought it instead. It would have saved me a lot or research and material gathering lol. Phillip Hall

[@PhillipHall01]

PS It's not made for metal that thick. I realize you was using that for demonstration purposes.. It works great of thin metal such as car body parts.. Doors, fenders, hood, roof etc... I hope you enjoy your machine as much as I enjoy mine. Phillip Hall

[@HomeGrownPyro1]

True that it would have saved you the time researching and building it…. But you gotta admit it’s pretty gratifying and rewarding when the companies price things out of reach, so you just build your own that works just as well lol

[@marcrossx71000]

hubieras perdido dinero cable aluminio 5 minutos y se calienta😂

[@arifmultani7247]

Sir please give me this dent pullar machine in side digram and data

[@albertoherrera4864]

Any ideas as to why mine welds in very weak? I have it on high and it doesn’t stick very well. The metal is clean and the ground is on

[@distractor_beamreviews]

I'm not sure. I'd try to set the tools option to different tools and see if you get stronger results. I don't think that's a recommended solution, but that's what I'd try.

[@SJ-pw8tx]

I had the same problem. It was a defected component in the board I'm thinking about posting a video on repairing it

[@javiergraniela6870]

​@@SJ-pw8tx that would be great

[@javiergraniela6870]

​@@SJ-pw8tx if you do..please let me know to watch it

[@JBFromOZ]

One thing I have learned is that you don’t want to push the tool hard against the panel when welding, in fact keeping the pressure light helps there to be more resistance and therefore heat at the point where the slide hammer tip is against the body panel, it is the heat that makes the connection.

[@ksauravtech]

Your video is very important for me I am from the great India

[@giovannicoore8774]

Unable to get mine to stick on the panel

[@khalidahmedin8027]

Guys it best tool if you know how to work and flow the step . Specially. Counter few resources.

[@ksauravtech]

I need more information video for this type I am student of Mechanical auto body parts repair

[@distractor_beamreviews]

I'll let you know if I make a follow up video.

[@ksauravtech]

@@distractor_beamreviews thanks 🙏🙏

[@marcrossx71000]

gringo usando cable de aluminio😂

[@laijulaiju]

Good

[@redeyecoyote23]

You sound like Seth Rogan lol

[@reynansagayno7300]

How much

[@CASHCORRALAUTOSALES]

How the plug looks??

[@Distractor_Beam]

nema 5-15

[@brettwilliams1536]

Has anyone had issue with their dent puller not sticking to metal?

[@MrCbell57]

You may be encountering an aluminum body part.

[@JBFromOZ]

Try not pushing so hard against the metal, as the heat is generated at the point of highest resistance an electrically poor connection will be where the heat concentrates, and that will allow the metals to fuse at that point