Simply GENIUS! I am soooo happy that I can now emboss using the DP machines! Thanks Vianney!
@VianneyCreates4 жыл бұрын
Yay! I can tell you're excited. I asked my husband "Am I lame bc I am this excited!!??" LOL! I was freaking out. (: I just feel now Marquise owners can get full use of their dies and I think that's so great!
@UDgirl3254 жыл бұрын
Oh my gosh! I actually did this the other day! I had cut foam for a project for my daughter and I had the same thought. It totally embossed the paper. So cool!
@VianneyCreates4 жыл бұрын
Yay!!! Why did it take us so long to think this up? LOL!!!
@toninoblet51824 жыл бұрын
Wonderful idea; I love the Diamond Press Marquise so easy to use and now we can emboss! Thank you for sharing your ideas.
@VianneyCreates4 жыл бұрын
Right? The foam is thinner than the foam for the shakers so works so well in the machine! Happy to help!
@lovemyferals4 жыл бұрын
I think the Marquise has been a good buy for me. I'm really pleased with it. Thanks for showing us some more of its versatility!
@VianneyCreates4 жыл бұрын
This makes that little lady even better!!! (:
@jeannelomano13314 жыл бұрын
Been waiting for Marquise to come back in stock and this is really a plus. Yay for you and us! Thanks.
@VianneyCreates4 жыл бұрын
Right??? I am way too excited about this because it just makes the Marquise that much better!
@judyestrada14464 жыл бұрын
Wow- That is a game changer. I have ran extra piece of card stock with me folder because I am still using the first folder as you are. It protects the die cut from the scars of our folder. It actually embossed the dies enough to be pretty. But your foam really highly embossed them dies.
@VianneyCreates4 жыл бұрын
Nice! Thanks for sharing your experience! Happy to help!
@DCANOTXZ4 жыл бұрын
Wow love it! Thank you so much. I’m glad to know I can do embossing. As I have some of Anna Griffin die cuts
@VianneyCreates4 жыл бұрын
Yes!!! I know lots of people only have this one machine and now they can get more use out of their dies!! Happy to help!
@mrsajc12294 жыл бұрын
Hey I wanted to tell you I decided to try n fix the marquee plastic folders. I found that if you drop them one at time in boiling water in an old pan they will get flat again! After they come out of the water I lay them to the side and lay something heavy on them till they cool off. Although I don’t leave each one for very long in water. Try it. Janie Collins
@VianneyCreates4 жыл бұрын
Thank you, Janie! I have had a few people do just this and they say it works well! I'm glad it worked for yo, thanks for sharing your tip!
@claudiaaceves91774 жыл бұрын
Wow that’s so cool. Total game changer. Thanks so much for the awesome tip.
@VianneyCreates4 жыл бұрын
Yay! I am so excited it worked and worked so well!! TY!
@louise118544 жыл бұрын
You could use the cut foam pieces as a rubber stamp. Probably one of the smaller dies so you wouldn't have such a hard time mounting it on something. You can stick it on a piece of cardboard. You are so clever!!
@VianneyCreates4 жыл бұрын
TYSM! A couple other gals have mentioned that fun thing to do! I was saying it reminds me of the potatoes we would "carve" to stamp with. LOL! I have a few foam stamps I actually paid money for! (: There was a fad for a minute of doing that, I can't even remember the brand names of the companies who delved into it. I only ever tried it a handful of times, but if we're going to cut it anyway...that would be a fun use for them!! (:
@laurenbeeksma49374 жыл бұрын
I did cut up the mat to my cuttlebug but it was to thick to go thru. I then used a piece of foam but not with paper. Now I can go back and try it again! Your way! TYFS
@VianneyCreates4 жыл бұрын
Yay!! Thanks for letting us know what you have tried! (:
@patriciagreen68804 жыл бұрын
Hi, when I don’t want to cut through the foam I use a thick piece of foam and one side of the folder and get the embossing without the DP cutting through the foam. It’s a thick piece of foam about the thickness of one side of the folder. Have always done it with my DP and now with the Marquise. After awhile it will break down but it works well. Then I can use the old foam to add dimension to die cuts.
@VianneyCreates4 жыл бұрын
Nice! Thanks for the tip on how you use it!
@456monaliza4 жыл бұрын
Very nice another way to use the Diamond press. Thank you
@VianneyCreates4 жыл бұрын
I was so excited this worked!! Happy to help!
@denaheck15064 жыл бұрын
I have cut out & embossed foam to make a stamp. You can add tacky adhesive on the back side & mount on acryllic block. They work pretty good & you can re-use several times. The stamp works a bit like a shadow stamp, you can add echo elements to your card by using a foam stamp, & even if you have the outline stamp you stamp over the foam stamp like a layered look. Also I have a french fluer type die but no stamp & made a background paper using same darker or lighter ink & made lovely background swirls. I did a tone on tone type look using a leaf die & a butterfly die using the dyi foam stamp. Play with it & try a few scenarios. Cheap way to make stamps for kids too. Wash them in the sink let them dry & re-use. Oh and you can paint on them acryllic or water color & stamp in junk journals. Etc.
@VianneyCreates4 жыл бұрын
I remember doing that back in the day...especially with what they now call Bigz dies. So fun! (Or even with a potato, LOL, of course, that was free hand!) Thanks for sharing how you use them, great ideas!!
@jenniepaduapadua16594 жыл бұрын
Wow the potato,I used to stamp on fabric and make kitchen curtains lol
@VianneyCreates4 жыл бұрын
@@jenniepaduapadua1659 Right?? So funny!
@Marilynlovesebiking4 жыл бұрын
This was fun. So glad you tried it. I have never bought fun foam.
@VianneyCreates4 жыл бұрын
I haven't, either...well, at least not for me to use! LOL!! Too bad I had to go get some more because Miranda hsd pretty much cut her sheets up to bits, LOL!!
@dlinton48704 жыл бұрын
Nice! Not something I need to do, but I've certainly cut foam with my dies before to get perfect layers of foam to pop them up. It's a great alternative for people who only have the Marquise though! Thanks for sharing.
@VianneyCreates4 жыл бұрын
Right? I know many people only have the Marquise or smaller machines, so this is a great thing to be able to do! TY!
@lasinmt1067 ай бұрын
I have what they call a crease plate for some of my machines. I'm thinking it is thin enough to maybe try in place of the foam and see how it works out. Also you can sometimes find very thin cutting mats Similar to the dense fabric and paper cutting mats that people use with the roller blades also craft knives and even punch and hammer boards for some crafts. Anyway I have found super thin ones and have used successfully as magic mats in several machines and also thinner than those too. I'm thinking I'll cut down my older crease mat which is like a dense gasket like material always in black and see if the Marguise can handle it. Like you mention DO NOT force anything through the machine or any of the die cutting machines. I also found a super thin cutting plate material I have used with great success in the Marquise that does not warp nearly as bad as the folders. And I've cut the folders apart and use one side for the top and the stiffer acrylic new cutting but very thin board for the other side. YOU may need to tape these together to insure the dies stay in place. Your results with foam is wonderful though. I don't know if you can find thin foam board but wonder if you could if that too would give enough to get the embossed elements from these dies. I have one huge bone to pick with Diamond PRESS and it's HUGE. They are way to often out of stock with new folders and worse out of stock with the machines. I live in a very rural low populated area so no chance of picking one up used at yard sales or shops that sell used items here. But it's very annoying that the company who sells the machines never have them year round on hand. I mean it's the core of their business. I love their dies too. I've been working hard to find how to get the DP dies to run through my many other machines. Sizzix, Spellbinders, Gemni, and my newest Empress even. It's been a big challenge. I think I may have success with a new cutting mat that's sold as an off brand thick shim. I've got other priorities right now and haven't had time to get back to trying all these things. Hoping by mid June I'll carve out time to pull out 3-4 machines set up outside under covered patio and drag out all my supplies and numerous papers etc. to have a day or two exploring and making notes what works what does not. Embossing is my second love if not my first with this craft and these machines. You always make the most lovely videos and demonstrations and insight videos. Thanks and huge Paper Hugs to you.
@clairegagne69064 жыл бұрын
You just hit a "game changer" here Vianney!! I'm gonna be attempting this for sure. The foam, like you mentioned, can be used as a dimensional for the back. WOW TY for attempting these new ways of crafting with what we have & to make them more beautiful without taking out the heavy die machines. Be safe & TYFS
@VianneyCreates4 жыл бұрын
RIght? This was the final frontier...now this machine can pretty much do anything up to 4 1/4" wide!!! Love it even more!! Happy to help!
@cynthia10484 жыл бұрын
That is really cool. I will try this. Thanks for sharing. Great idea 👍
@VianneyCreates4 жыл бұрын
Happy to help!!! I am so happy to have come up with this, it works so well and there are several uses for the foam, too! (:
@grannybibi4 жыл бұрын
Oh My Gosh, this is a game chanter. I love my Marquise…love it more now!!! Thanks for showing that we can easily emboss with the Marquise. I'm so thrilled.
@VianneyCreates4 жыл бұрын
Right??? I was/am so excited! Happy to help!
@renejmercer76184 жыл бұрын
I ACCIDENTALLY found this out as I was working on a sea chest that has a amazing lock. This being a 3D project I wanted to build my lock up with black foam, no black so I used a dark blue took my SN Black alcohol marker colored the foam and ran it through not only was the emboss amazing the extra foam around the lock separated into very thin pieces that allowed me to make a BEAUTIFUL flower. Just thought I'd share this. Your east coast crafty friend, Rene'
@VianneyCreates4 жыл бұрын
So cool!! Thanks for sharing your happy accident!! (:
@danceswithpam4 жыл бұрын
Awesome! I will try it! I have a bunch of fun foam. Thank you!!
@VianneyCreates4 жыл бұрын
I am not a fan of thick, kid, foam...but wow does it work for this! Even the foam flower came out pretty cute!! I hope you do try it out when you need some embossing done. (:
@kittywilliams79874 жыл бұрын
Very interesting; I will have to try this. Thanks again!
@VianneyCreates4 жыл бұрын
Yay! It works so well!!
@sandrafergueson81554 жыл бұрын
That's cool. I didn't get the new Diamond Press . Because my husband had just surprised me on my bday with a Bigkick. That is awesome it does that!!
@VianneyCreates4 жыл бұрын
Yeah, it was a fun thing to discover. Enjoy your birthday gift!! (:
@marcielottie66203 жыл бұрын
Thanks so much for this, where can i find the embossing material? i checked dollar tree. thanks
@VianneyCreates3 жыл бұрын
That's where I got mine, it's not always available...but Walmart sells kid's craft foam int he craft area, too. TY!
@krististokes99334 жыл бұрын
You are soooooo right this is a game changer. Now I will go hunt down some foam. Thank you so much for experimenting. .👍👍👍👍 Kristi
@VianneyCreates4 жыл бұрын
Right??? I always felt so bad in video saying "we aren't going to emboss it" or "You can't emboss in the Marquise but use another machine for that." Ugh. I don't know why this took me two months to think of, really, the light bulb went off after I reviewed the shaker kit! I had totally forgot this cuts foam and I figured a little cardstock wouldn't hurt! It was definitely worth a try. Total game changer!!! (: TYSM!
@diansolomon6143 жыл бұрын
I have an older set of dies from CC & the Marquise cut & embossed it without any foam, was I surprised !
@VianneyCreates3 жыл бұрын
Nice! It really depends on the thickness of the dies and the papers, sometimes the foam is needed and sometimes not. So great!! TYSM!
@tracilord48544 жыл бұрын
Great tip V! If you put the foam on the other side (with no blade side of the die) cuz it will still have the thickness & it won't waste or cut the foam. Tfs! ❤😘 or just use the die cut piece of foam unread of dementioals to pop it up.
@VianneyCreates4 жыл бұрын
So true, I do like putting the foam under the paper bc it will emboss the paper, in one pass!!
@DIVA39594 жыл бұрын
Thank you so much I enjoyed this it really helped me a lot ...I’m gonna try this , Where did you get that flower die from I like it
@VianneyCreates4 жыл бұрын
Thank you so much! It's a Spellbinders die, but I don't know the name of it off the top of my head.
@bug_queen85744 жыл бұрын
I'm wondering if you could put the foam under the die (layer foam, die up, paper), then you wouldn't have to cut each foam piece? I'l have to look and see if I have any foam and can try
@VianneyCreates4 жыл бұрын
You can definitely try, I'm not sure. (:
@mandygirtz66714 жыл бұрын
Cool idea never thought that you could to that. Thank you for the video
@VianneyCreates4 жыл бұрын
I didn't, either, and duh...it's so easy!! I hope the tip helps you!
@Louisianagirl_11264 жыл бұрын
Yes, I like the foam as the shadow. That is cool. TYFS. Take care, stay safe. ~Barbara
@VianneyCreates4 жыл бұрын
Thank you so much!
@yolandas4 жыл бұрын
Great tip! Thank you. Can’t wait to try it. I actually have foam in craft stash already.
@VianneyCreates4 жыл бұрын
Yes!! Try it out. Obvi, we don't have to emboss with every die (I hardly ever do it), but it's nice to have the option!
@deborahedison98522 жыл бұрын
I'm smiling. Definitely a game changer.
@Shelly86M4 жыл бұрын
Great idea! Thanks so much for sharing!! Makes me love my Marquise even more. 😊
@VianneyCreates4 жыл бұрын
I know, right?? It certainly gives us full use of our dies, and that is so very great!! Happy to help!
@donacrafts4 жыл бұрын
Thanks for sharing your discovery, they look great...
@VianneyCreates4 жыл бұрын
Yeah, they look just as good as any other machine would do!! TYSM!!
@shannonmay62054 жыл бұрын
Your the Bomb!Thank you for the discount code.....Total game changer!!!!
@VianneyCreates4 жыл бұрын
Right? I was super excited it worked...and worked so well!!! TY!
@daphnecampbelljinnette68084 жыл бұрын
How about putting the foam on the flat side of the die, so it won't cut the foam, and see if it embosses as well? Theoretically, you should be able to just use DP foam from the shaker kits?
@VianneyCreates4 жыл бұрын
Yes, but the foam from the shaker kits has all of the sticky, but you can. I would reserve that good shaker foam for a shaker and use this cheap stuff for the embossing. Let me know if you try it!
@daphnecampbelljinnette68084 жыл бұрын
I forgot about the sticky. But I am curious if it will emboss if it is on the flat side of the die rather than the cutting edge. Thank you for the heads up on the sticky, because I was thinking of doing it right now. Love all your videos. You are amazing!
@VianneyCreates4 жыл бұрын
@@daphnecampbelljinnette6808 Awww, thanks so much! (:
@jenniepaduapadua16594 жыл бұрын
Wow,that is so cool I’m impressed!!!
@VianneyCreates4 жыл бұрын
Yay!! I was, too! So excited!!
@kateharrop49054 жыл бұрын
Vianney, I figured out how to cut plastic with my Marquis Die cutting machine without a metal shim. I use foam and paper. I have pictures.
@VianneyCreates4 жыл бұрын
Oh, wow! Where are these pictures?
@mamapillow83654 жыл бұрын
Color the foam flower with oil pastel and heat with an iron and shape. You're gonna love the effect. Always enjoy your videos.
@VianneyCreates4 жыл бұрын
Oooh, sounds good! TY!
@ginahowe26454 жыл бұрын
Nice! Jen Maguire uses foam to pop up her pieces so that would be perfect!
@VianneyCreates4 жыл бұрын
Cool, yeah, there are so many uses for the foam pieces!
@bonnietheoneandonly4 жыл бұрын
Thank you so much for this amazing idea - It makes a huge difference! I’m finding that the newest Diamond Press is much harder on the folders than the smaller one - I think I’ll be replacing them more than before (which was almost never).
@VianneyCreates4 жыл бұрын
Happy to help! It's a much larger area with so much pressure, I figure that's why the folders get a little more beat up. They still cut, this one is going about two months strong with every day use! (: I hope you are able to try this trick for embossing.
@tybalfour4 жыл бұрын
Thanks for sharing! I will definitely be trying this.
@VianneyCreates4 жыл бұрын
Yay!!! I hope you do. I don't always emboss with my dies but it's great to have the option! (:
@barbarahairston654 жыл бұрын
Nice demo! Gorgeous peacock. Thanks for sharing, enjoy your Memorial Day🌟✨
@VianneyCreates4 жыл бұрын
Yay! Thanks so much, Barbara! I hope you are will today.
@nancern534 жыл бұрын
Great discovery, Vianney! Order if they’ll come out with an embossing mat now?
@VianneyCreates4 жыл бұрын
TYSM! I don't know, like I said...I think if there was a rubber mat that went with this...it would probably just cut right through it (like the Gemini Go does). It's such a small, tight, area that I think the pressure just obliterates what goes in there. I hope that makes sense, but who knows!? (:
@cathyfox22404 жыл бұрын
Wow that is amazing! I’m glad you thought of it, because I never would have. Thanks for sharing! 😊
@VianneyCreates4 жыл бұрын
It was so simple...I can't believe it took me two months to come up with! LOL!!
@tonikuretich45984 жыл бұрын
Thanks for sharing! Wow are you still using your original cutting mat?
@VianneyCreates4 жыл бұрын
LOL!! I am! I did use a new folder recently to cut a larger die bc I wanted the paper to not get creased as can happen when using a really old folder...but today I used that AG die in there and it was great!
@deborahcurtis984 жыл бұрын
Well, who knew?! Thanks for sharing with us.
@VianneyCreates4 жыл бұрын
Right? I knew we could cut foam...I can't believe it took me a little while to think to layer it up with paper to mimic a rubber embossing mat!! Yay! TYSM!
@mayadoka6404 жыл бұрын
You're brilliant, Vianney!! Thanks so much for sharing this -- it is a game changer!! :)
@VianneyCreates4 жыл бұрын
LOL!! I asked my husband "What can I say to show my excitement!!!???" He recommended "game changer" and I went with it, it really is! I always felt bad in videos saying "you can't emboss on the Marquise..." and now you can!! (:
@sylaniaoliver64514 жыл бұрын
Good to know, I can see not using my big shot as much. Thank You again for your testing and passing it on.
@VianneyCreates4 жыл бұрын
Right? Now I don't have to choose another machine...this will do it!! (:
@lauramiller62944 жыл бұрын
What a great tip for this machine. I will give that a go.
@VianneyCreates4 жыл бұрын
Yay! I hope it helps!
@diansolomon6144 жыл бұрын
This is so cool who knew, your one smart cookie.
@VianneyCreates4 жыл бұрын
LOL!! Thank you so much!!
@celiaalvarez42484 жыл бұрын
Thanks for all you do. I like how you explain . and I already watched the other video. .
@VianneyCreates4 жыл бұрын
That's so kind, thank you!!
@lorimach20144 жыл бұрын
Great video! Do you think the 3D embossing folders will work in the Marquis?
@VianneyCreates4 жыл бұрын
TBH, I wouldn't try it bc if I did and later it messed up my machine...I would have lots of nice people super upset...including DP, I'm sure! LOL! People have told me they have used them in there but I won't be encouraging that. I do have a video of what you can put in there...it's under Marquise FAQ. (:
@margueritepeaden34454 жыл бұрын
After you cut the foam the first time, could you use the piece that was cut again? Cut you shape, put the already cut foam back in and send through. Would that emboss? I know it would then be a two step process, but if it worked the foam could be used with the die multiple times. Just thinking.
@VianneyCreates4 жыл бұрын
Someone had given a tip on how to use the foam again, but it was pretty squished when it came out of my machine. I don't know that you'd dgt the same pressure the next time, but it's definitely worth a try!
@FLCraftyGirl4 жыл бұрын
Thanks for trying this and sharing....now I just need to get craft foam sheets.🙂
@VianneyCreates4 жыл бұрын
I know, a lot of us crafters have them laying around...or at least you would think! I thought I had some but Miranda had destroyed it all! LOL!
@aleciawalter81604 жыл бұрын
I buy foam at Dollar Tree. It is very thin. You get 36 sheets in a bundle. I love my Marque die cutting machine. I love using embossing folders in my machine. To me it is magical.
@VianneyCreates4 жыл бұрын
Yes, I showed the DollarTree foam when I mentioned they didn't have any at my local one yesterday, It is thin, nice, and cheap! LOL!! Believe me, I would have used that if it were in stock. (: I hope you try this out!
@naomiburton85354 жыл бұрын
I do my manger dies out of white sticky foam on dark blue it is awesome
@naomiburton85354 жыл бұрын
I loved watching this
@VianneyCreates4 жыл бұрын
TYSM!
@VianneyCreates4 жыл бұрын
(:
@daphnecampbelljinnette68084 жыл бұрын
Oh, yes! There are metal shims also included in DP shaker kits.
@VianneyCreates4 жыл бұрын
Yes, I have let them know that you guys have requested metal shims large enough to fit the full size of the folder...that way we can cut fabric, etc... We will see! (:
@toiwright48304 жыл бұрын
This is a great idea. I am going to try is right away.
@VianneyCreates4 жыл бұрын
Yay!!! Let me know how it goes.
@toiwright48304 жыл бұрын
@@VianneyCreates The only fun foam that I could find at my house was the Foamies 40 Multi-Color Sticky Back Foam Sheets. So, I tried them - and they worked! I tried them with Local King Rubber Stamp dies. If I cut them with the foam side facing up, sometimes the release paper did not cut. I preferred cutting them with the release paper facing up so that I could use the sticky to immediately stick the foam piece to the cardstock. It adds great dimension. The only issue is that the foam's color shows. (www.amazon.com/Darice-1035-55-Foamies-Sticky-12-Inch/dp/B004LOHW6G?th=1)
@VianneyCreates4 жыл бұрын
@@toiwright4830 OMG, that's so great!! I'm glad you tried it and now have a new fun trick to use!! (:
@jenniepaduapadua16594 жыл бұрын
I wonder if you can add embossing powder to the form?
@VianneyCreates4 жыл бұрын
The foam? I'm sure you could but be careful when you heat it!!!
@jenniepaduapadua16594 жыл бұрын
You sure woke everyone up with this video lol
@VianneyCreates4 жыл бұрын
@@jenniepaduapadua1659 I know!! It's going off! (:
@lkees74194 жыл бұрын
Wow this is good to know, thanks for sharing your new discovery
@VianneyCreates4 жыл бұрын
Ya!y Maybe I'm more excited about this than other people!! LOL! I know there are lots of people who only have this machine and I want them to know they can emboss, too!! (:
@rosiescraftyshack71774 жыл бұрын
Awesome sauce, i need to get me the diamond press marquise. tfs that is a game changer for sure.
@VianneyCreates4 жыл бұрын
Right? I am so excited about it bc I know lots of people only have this one die cutting machine and now they can get full use of their dies.
@hummingbirdlane654 жыл бұрын
Wow. Thanks for sharing. Gonna have to give it a try.
@VianneyCreates4 жыл бұрын
Yes!!! I am so excited about this discovery!! I hope people try it and can use their dies to their fullest!
@lynneclark79023 жыл бұрын
Very cool! I don’t have a Marquis, but very cool. On another note, why in the world did 15 people give you a down vote? What the heck?
@TheHecticEclectic4 жыл бұрын
Thanks. Was wondering how we could emboss. You are awesome!! 🤗
@VianneyCreates4 жыл бұрын
I am telling you, I haven't ever done a "happy dance" but this just about got me there! LOL!! I was super excited, maybe a little too excited. What a great thing, though!!
@jenniepaduapadua16594 жыл бұрын
Maybe glitter and use it on card, I’m like you don’t want to waste anything!!! I just love using my diamond press,it’s so easy
@VianneyCreates4 жыл бұрын
@@jenniepaduapadua1659 I know, we love to use everything up!
@dianepeter36254 жыл бұрын
Did you see the video where Lisa showed a hack for lining up the dies for stamped images?
@VianneyCreates4 жыл бұрын
Girl, I've been making apertures to help line up stamps and dies for about 10 years now! LOL! I have done it in many videos. I do mention that Lisa makes what she calls a "guiding window." It's an old trick that we used to use a lot when making Heartfelt Creations flowers. (:
@dianepeter36254 жыл бұрын
@@VianneyCreates AH! I never did those so I got it from Lisa within the last few years.
@PaperWishesPaperHugs4 жыл бұрын
Hello 👋. I really enjoy watching your videos. Specially when your working with crafter Companion products.
@VianneyCreates4 жыл бұрын
Thank you so much!!
@melodyhodge91654 жыл бұрын
Cool! Thanks!
@VianneyCreates4 жыл бұрын
Happy to help!
@marymoore12414 жыл бұрын
Put your foam on top of die on the non cutting side, embosses great and conserves on your foam.
@VianneyCreates4 жыл бұрын
Sounds great, I'll have to try that. The foam did smash down and hasn't yet puffed back up to pre squish thickness...do you think that will make it less effective the next time?
@lindarobertson59784 жыл бұрын
That is exciting! Thank you for sharing.
@VianneyCreates4 жыл бұрын
Yay! I thought it was pretty nifty. Happy to help! TY!
@vicki30814 жыл бұрын
Love your find❣️
@VianneyCreates4 жыл бұрын
Yay!! TYSM! I am really excited about this!
@donna67404 жыл бұрын
Wow, this is Awesome, Gonna try this!! Thank You for all you do. :) xx
@VianneyCreates4 жыл бұрын
Yay!! I hope you do! Now people with the Marquise can get full use of their dies (if they want)!
@GreenPumpkin7674 жыл бұрын
Great discovery
@VianneyCreates4 жыл бұрын
Yay!! TYSM!
@niascraftynana4 жыл бұрын
Thanks for this fantastic revelation. Many years ago I used to watch a young lady on KZbin who designed scrapbook layouts and she always used foam to add dimension to her die cuts. Guess I had better buy some craft foam. :)
@VianneyCreates4 жыл бұрын
Yes, get some! Miranda usually has some that she cuts up in pieces, but of course, it was all gone! LOL!! I hope you have a safe outing if you choose to go pick some up!
@niascraftynana4 жыл бұрын
VianneyCreates Veanney, I’m high risk (75 years old with ❤️ issues). It’ll take more than craft foam to get me out. Lol
@VianneyCreates4 жыл бұрын
@@niascraftynana Amen to that!! I hope you continue to do well at home. (:
@glocat19634 жыл бұрын
I really like this video good information. I was just wondering if a embossing folder would work? Again great videos because of your knowledge I buy a lot of CC items. Now i will start using your code. Thanks for all do. I have to go now you just posted a new video.😅😃😂
@VianneyCreates4 жыл бұрын
Embossing folders work, the machine comes with them! Some people say they put their cut and emboss folders through the machine, but I wouldn't recommend it.
@sharonmoore31714 жыл бұрын
You are Amazing! !🙆♀️
@VianneyCreates4 жыл бұрын
LOL!! You are! TYSM!
@Shar0734 жыл бұрын
Your one smart cookie. But I bought this still in box and didn’t know it didn’t emboss
@VianneyCreates4 жыл бұрын
It cuts and you can emboss using embossing folders...however the folder type machines don't emboss using dies bc they aren't set up for that. Happy to help!
@barbarajackola87014 жыл бұрын
Great idea, seems to work well.
@VianneyCreates4 жыл бұрын
It really does!! TYSM!
@barbarajackola87014 жыл бұрын
I only go to Walmart oncev every 2 weeks on Tuesday morning at 6am when they open up just for seniors, when I go again I will check out the foam.
@VianneyCreates4 жыл бұрын
@@barbarajackola8701 I'm glad so many stores are making special hours for seniors, that's a really great thing. I found this foam in the kid's craft area. (:
@lindatorres-lopez83064 жыл бұрын
Must purchase foam now ... Talk about a game changer... Once you remove the cut portion of the foam you can use what's left to make shaker cards, instead of a circle or square it would be the peacock. If that makes sense.
@VianneyCreates4 жыл бұрын
Definitely!! I am so in love with this trick, it works so well. (:
@robinhenderson52024 жыл бұрын
Can you use spellbinders dies in this machine?
@VianneyCreates4 жыл бұрын
Of course. All thin metal dies are interchangeable within any machines that cut thin metal dies.
@robinhenderson52024 жыл бұрын
@@VianneyCreates Thank you so much for answering my question!!! Hugs to you!💐❤💐
@suzannesmith78214 жыл бұрын
Super great to know. I’m so glad I subscribed to your utube channel. Thanks.
@VianneyCreates4 жыл бұрын
Awww, that's so kind! TY!
@GodsDesire4me4 жыл бұрын
Thanks for sharing. That's great.
@VianneyCreates4 жыл бұрын
I was super excited that it worked...and so well!! I hope people try it out! TYSM!
@Sewcrafty10134 жыл бұрын
Good to know! I have lots of foam. ~Janice
@VianneyCreates4 жыл бұрын
Unfortunately, I had to go pick up some foam but normally I think we all have some laying around! (:
@betsyschwartz11294 жыл бұрын
You could use the foam piece to 3d the piece
@VianneyCreates4 жыл бұрын
Yes, I mentioned that. What fun, there's always a use for it!! TY! (:
@lyndadarby23454 жыл бұрын
Brilliant!
@VianneyCreates4 жыл бұрын
What fun!! Inexpensive way for this little lady to be used to her max!!
@lyndadarby23454 жыл бұрын
@@VianneyCreates Right? I feel like you could glue 2 thin pieces of foam together to make it work. Also keep those foam diecuts to add dimension to a project. When I make shakers, I just color the edges to match. I'm telling you, you gotta try shakers this way! A good example is watching Scrapdiva29 on YT she's the one who got me started on it. I also wanted to tell you that I've been adding packing tape to all my stamp and die sets. And then I emboss as well. Love it!
@juanawhitehead49664 жыл бұрын
Love it 😍
@VianneyCreates4 жыл бұрын
TYSM!!
@sandrasthilaire35504 жыл бұрын
That a great idea. Tfs
@VianneyCreates4 жыл бұрын
So happy it worked...and so well!! Yay! TY!
@lizmartinez80704 жыл бұрын
Awesome 👏
@VianneyCreates4 жыл бұрын
TY!!
@ckennedyiii87744 жыл бұрын
cool, great tip!
@VianneyCreates4 жыл бұрын
Happy to help!!
@naomiburton85354 жыл бұрын
Michels has sticky back sparkle foam
@VianneyCreates4 жыл бұрын
Cool!
@madelinecruz75904 жыл бұрын
Will be trying this for sure !!! Awesome, thanks for sharing this, I just happen to have some foam from DT too. This is super cool 😎👍 Happy Memorial Day, 🇺🇸 🤩 🇺🇸 Maddy NY 🌈🌺🌻🌸🦋🎊
@VianneyCreates4 жыл бұрын
So great, it works so well!! I hope you do try it next time you need to emboss with a die. (: TY, you, too!!
@Jimba014 жыл бұрын
Brilliant!👏👏👏👏👍🏽👍🏽👍🏽
@VianneyCreates4 жыл бұрын
Yay, yay, yay!!!! Happy to help!
@caroladams39494 жыл бұрын
Great video.
@VianneyCreates4 жыл бұрын
Thank you!! (:
@patscambia43704 жыл бұрын
A use for the foam you cut is to use it for Dimension for the injection you cut out.
@VianneyCreates4 жыл бұрын
Yes, I mentioned that in the video! lots of uses. TY!
@charlottebruce43874 жыл бұрын
Look at the warranty for the Diamond Press Marquee
@VianneyCreates4 жыл бұрын
That's always a good thing to do!
@Veronim784 жыл бұрын
Thank you for your wonderful tip. That was a happy finding. I have foam tape somewheres that I purchased at Walmart couple months ago. My question to myself ....where is it.😁
@VianneyCreates4 жыл бұрын
LOL! I hope you find it. I am so glad this worked so well!! TY!
@shennahull21834 жыл бұрын
This is so cool !! Thank you for the great tips and always wanting us to be successful, I truly appreciate your kindness..Crafty Hugs ...