This auction Crown Vic had a broken gear shift indicator when I picked it up last month. Luckily I was able to repair it quite easily and in this video I will show you how.
Пікірлер: 36
@thomasfrench81722 жыл бұрын
This repair guide was a big help,, great presentation.
@mammagrace47282 жыл бұрын
This was incredibly helpful. When someone mentioned the word "transmission" I hit the internet and found this...sure enough, it was the problem. Cannot thank you enough.
@PhotomikesGarage2 жыл бұрын
Thank you.
@signal12hvac Жыл бұрын
just got a 2007 cvpi with same issue, Thank you for this excellent how to video ! much appreciated!
@thekreal87032 жыл бұрын
Also I took the traction control button off my 2001 Vic and put it on the hidden traction control plug harness. When I hit the button it blew a fuse and also killed the relay inside the instrument cluster. No bueno...Bueno... radio or windows until I wired a work around. Thanks for your great content 👍
@revenge50497 ай бұрын
Also even if you put a traction control button you still won’t have TC. It just comes with wiring for it but they don’t actually have it. The crown Vics that did have a different brake set up.
@nafeesahmad97613 жыл бұрын
Good information 👍🏼
@PhotomikesGarage3 жыл бұрын
Thank you!
@soundmind1923 жыл бұрын
Good info. Just bought a 2008 P71 same issues, gear indicator stuck and no odometer reading. Need indicator fixed for state inspection.
@edcrego3964 жыл бұрын
I was sort of hoping you would have to go a little deeper glad yours was an easy fix for you mine how ever is a little different I have a 2001 towncar nice car 490,000 miles son it and it still run like a top my problem is the spring on the cable that moves the pointer can't find were it attached to I have everything out of the way ,any ideas thanks lost the dash for now Ed
@timprobasco9882 Жыл бұрын
Hey Mike... great video. I have a 2008 Crown Vic Interceptor that I want to sell and want to fix the gear shift too. my problem is that there is a 2 minute delay putting it in gear. I have to wait to hear a little click... I've dealt with it for 5 years but in selling it I want to fix it for the next person. the car also has that kill switch but underneath.... ANY SUGGESTIONS HOW TO TELL A MECHANIC TO FIX IT. ... THANKS
@stansmith4054 Жыл бұрын
I have the same issue as you did. Did you ever find out what the problem was?
@innovativecnc39283 жыл бұрын
Hi there, i just bought an '09 cvpi and i was wondering if you ever got the traction control switch for it or got it working somehow? Mine has the same panel with pedal control switch but no traction switch.
@Qgee6ix2 жыл бұрын
If you turn that little black screw that’s attached to the cable on that brown plastic bracket you can adjust the lever position as well. Simple.
@Lxdeez Жыл бұрын
You don't need to remove all that trim and bezel. The top cover behind the steering wheel will come out with a little shimmying.
@revenge50497 ай бұрын
This helped a lot thanks
@tushar25013 жыл бұрын
I got same problem on ford windstar 2000,3.8 litre do I think same procedure will work?
@bryanr7543 жыл бұрын
What size is the screw
@bryanmendoza76303 жыл бұрын
Can a dirty neutral safety switch cause a check engine light?
@scabbythecrownvic3 жыл бұрын
What detachment was this car from?
@codylaforest8963 Жыл бұрын
Most grand marquis come with the peddle adjuster and no the traction control would not turn off just from wiring in a new trim piece I’ve tried in my 2000 marquis
@thekreal87032 жыл бұрын
I have to wires/connectors coming out to the trunk release slot on the dash there. One has a sticker that says ignition? Do you know of why there is 2 or which should be used?
@aeyb7013 жыл бұрын
Thanks for imparting more lore on our vehicles. Btw the little black clogged wheel on the gear indicator plastic yellow piece you screwed back in is for fine tuning the indicator needle, done with lever in park, then rotating it to where it’s exactly centered. Just a minor point that I saw elsewhere on the ‘Tube.
@Brooklyn_Powers3 жыл бұрын
I noticed that adjustment wheel and figured that’s what it was for.
@malikisrael96173 жыл бұрын
Will this work on 2005 grand marquis
@joeybaez17454 жыл бұрын
I have a 2011 crown Victoria police Interceptor and it does not have cruise control, my question to you is how hard would it be to install a cruise control on my crown Victoria that does not have it..can you make a video on how to install one?. Thanks
@tba64033 жыл бұрын
you have to get a steering wheel with cruise a tan one is on ebay for 100 rn and u have to get your computer flashed by a shop or dealer to enable cruise control if youre on an 08+ crown victoria, older ones need an abs pump with cruise or something like that
@stansmith4054 Жыл бұрын
My gear lever on mine is difficult to move from park to reverse or drive. Not sure what the issue is.
@clintwarnock5706 ай бұрын
The first dash and the last dash have different mileage on them? Did you change gage cluster or different cars?
@stevestancill47314 жыл бұрын
Yes my indicator is out on my 2010 I cannot see how many miles is on it thinking about taking it swear to get it fixed
@Tier1Norseman3 жыл бұрын
There are a few places you can mail it to and they fix it and send it back for like $100. I had to as well for my 2010. But my biggest pain has been the horn. I think they disconnected it so I've been trying to find where to fix it. They left an air horn working at least ha ha.
@ShauntagoThomasT.O.N.BiggShaun Жыл бұрын
What size is that scree
@oofffff1342 Жыл бұрын
5:11 i need the bracket mine broke in half but i cant find the bracket
@zekeholloway44133 жыл бұрын
4:35 that's the contacts for the headlight switch, that's not how you're supposed to disconnect it
@joeybaez17454 жыл бұрын
Also is that even possible?
@DocM. Жыл бұрын
****PLEASE HELP!!!**** The black screw attached to the black cable is broken in half (the black "screw" is what goes through the black adjustment wheel in the dark brown bracket) I can't easily just glue it back together, it wasn't a clean straight line break, there's a teeny tiny chunk missing from the screw. Kindve like when you chop down a tree, that triangular cut out shape before you yell "TIMBEEEEERRRRR!!!" 😂 but seriously this has been really hard to fix/rig Is there a way to fix/rig it or do I need a whole ass new gear shift indicator set, because I can't find a single one anywhere on the internet. All discontinued and out of stock, unless anyone has *A SAFE UNALDULTERADED VIRUS RIDDEN* website link 😂 Please help and thank you!