1950's made in USA Wayne Air Compressor Restoration Special guest: Messias Carvalho from Brazil Welds channel - / brazilwelds
Пікірлер: 1 100
@BrazilWeldsMessiasCarvalho5 жыл бұрын
Excelente trabalho de restauração meu amigo! Gostei da minha participação neste minuto, kkkkkk (lol) kzbin.info/www/bejne/pmLdnaaAbbqBa7s
@VictorsShop5 жыл бұрын
Obrigado, meu amigo. Com uma participação dessas, o resultado só poderia ser um sucesso!
@BrazilWeldsMessiasCarvalho5 жыл бұрын
@@VictorsShop Tá bom, tá ótimo! Rsrsrsrs! kzbin.info/www/bejne/pmLdnaaAbbqBa7s
@VictorsShop5 жыл бұрын
BrazilWelds - O Canal da Soldagem 😂🤣
@abuahmad35005 жыл бұрын
Good job very very very nice your work
@edzil83665 жыл бұрын
boa, que maquina de solda é aquela, da uma luz.
@33478615 жыл бұрын
Finally. An actual restoration, as opposed to a paint job. Well done.
@funkyzero5 жыл бұрын
Dang man, that's a lot of work... and you even went all-out with the Imron paint. That's a beautiful piece of work man.
@Greymanrp5 жыл бұрын
I'm so happy to see channels like this that are saving these machines from the scrap yards. Great job.
@justinecooper95755 жыл бұрын
I like that you painted the motor housing grey instead of red. It gives the unit a more aesthetic appeal.
@MrWolfSnack4 жыл бұрын
The factory did that to save money and time so they did not have to have 2 different paint booths and assembly lines for painting 2 different colors.
@justinecooper95754 жыл бұрын
@@MrWolfSnack Makes perfect sense. Especially since different colors doesn't add anything to the functionality of the unit and it likely wouldn't be on display anyway.
@Buzbikebklyn15 жыл бұрын
Beautiful workmanship. Back in the 1970s and 1980s, I worked on air compressors every day. That Wayne was built like a tank. The " new ones" were junk compared to the old ones. The old one could be rebuilt, the new ones couldn't. BUT sometimes the old tanks rusted out from the inside. One day I rebuilt a Wayne "head assembly" and mated it to a brand new tank. It was successful, so much so that my boss picked up all the "Old head assemblies" and bought the "new" tanks as junk. With all new electronic components. We sold every single one. You got yourself a new subscriber! It was nice to see the same work I did way back when.
@justinrochefort83694 жыл бұрын
The very definition of a thorough restoration! Very impressive.
@gordonagent70375 жыл бұрын
Sir, I take my hat off to you, that was as good a restoration as I have seen done, very thorough and that compressor will be good for goodness knows how many more years. Very professional and thorough and a real credit to you, congratulations
@sweetkellymay4 жыл бұрын
Best guy on KZbin, doesn't just "restore it" he actually rebuilds it to the same, original working condition.. Editing is good also..
@bobballard37704 жыл бұрын
Very good.
@Talon754075 жыл бұрын
Very nice work, it's nice to see when someone uses the word restoration, they actually do it. Not just a clean and paint. Fantastic work, quality parts and paint. Over the top.
@DIYAlexandraLuiza5 жыл бұрын
Caramba eu achei que era canal americano de tão profissional que ficou a restauração =) Foram os 43 minutos mais agradáveis que eu já assisti
@andreluis909695 жыл бұрын
Estava com a mesma sensação, até que vi a embalagem da bucha escrito "bucha centrifugada" em bom português!
@MurilloNogueira4 жыл бұрын
No inicio achei a mesma coisa mas desconfiei dos carros na estrada....
@denisrl28423 жыл бұрын
Concordo plenamente, o único detalhe é que eu não vi o ponteiro do manômetro de movimentar, mas as vezes foi impressão. Parabéns pelo trabalho.
@3lc_1_0.5 жыл бұрын
Otimo ver um brazuca fazendo um trabalho desse nível, assim como o figura do Hand Tool Rescue. Ft.mestre Messias, impagável. Parabéns!
@TRGRESTORATIONS5 жыл бұрын
Damn awesome restoration! With all of those upgrades, that thing is 10X better than when it was new!
@yvesdesrosiers23965 жыл бұрын
Nice job! Looks great. You have talent. Thank you for sharing.
@thiagodealbuquerque5 жыл бұрын
Poucas vezes assisti um trabalho tão profissional qto esse. Parabéns!
@tiagobezerra31755 жыл бұрын
Trabalho excepcional, meus parabéns!👏👏👏👏👏
@humbertomtf5 жыл бұрын
É ótimo saber que há profissionais de primeira linha fazendo restaurações aqui no Brasil. Parabéns pelo trabalho! Ficou sensacional!
@cyliamutti63374 жыл бұрын
C'a
@breakingtoast22554 жыл бұрын
I love the way you hand lapped the spring valves and made a tool to finish them nice work
@allambatista11975 жыл бұрын
Grande Trabalho, feito com detalhes de artesão, tem que gostar do que esta fazendo para efetuar um trabalho como esse. Parabéns, no aguardo de outra obra de arte como essa.
@ClaudioBarriani5 жыл бұрын
Muito bom o trabalho. Estão de parabéns! Os detalhes sempre são importantes, e fazem toda a diferença.
@PeterColmore5 жыл бұрын
That was an absolute joy to watch and seriously what I call a proper restore, it was great to see a man who knew exactly what he was doing and with confidence even when it came to the rewiring. Amazing job and I hope it gives you many years of trouble free use.
@browncrichlow5 жыл бұрын
Wow!!! That's what you call a restoration... You turned that into a thing of beauty, and good for another 40 + years.. Keep the video's coming... Did I say TOP JOB!!!
@res14925 жыл бұрын
i agree, looked after properly this thing should last forever...
@Jcrljunior5 жыл бұрын
Completamente apaixonado! Eu tenho assistido muitos vídeos estrangeiros e gostaria muuuuuito de achar um brasileiro do mesmo nível. Não tenho dúvida alguma que achei. Acaba de ganhar um escrito. Estou viciado em assistir vídeos de restaurações. Sou caprichoso e muito detalhista. Pena que não tenho esse ferramental todo. Meus parabéns meu amigo.
@JoaoLucas-lp7jx5 жыл бұрын
Trabalho perfeito, eu amo ver uma restauração bem feita
@leandrobcal24534 жыл бұрын
Trabalho fantástico, resultado final prazeroso
@fs815 жыл бұрын
Que monstro é esse!? Grande trabalho, linda restauração, parabéns!
@maragatoh5 жыл бұрын
Puta merda....simplesmente adoro quando máquinas antigas retornam a vida,ainda mais de forma tão espetacular e esmerada,teu vídeo não fica devendo em nada aos de canais estrangeiros...parabéns... Por mais vídeos de restauração como este.
@gordonagent70375 жыл бұрын
Fantastic restoration, probably better than the day it was first manufactured and now ready to give you years of hassle free service. Well done, you quality of finish was second to none and an absolute credit to you.
@mlebrao4 жыл бұрын
Incrível trabalho. Parabéns!
@robertoricardo33535 жыл бұрын
Poste vídeos com mais frequência, por favor, seus vídeos são demais.
@Temuba5 жыл бұрын
Excellent rebuild and every detail done correctly. Thanks
@coreycarver9974 Жыл бұрын
Beautiful restoration and love seeing people fix old equipment and making missing parts
@moraes02035 жыл бұрын
Espetacular, sem mais palavras para este belo trabalho.
@greemstrider5 жыл бұрын
Amazing work.... absolutely godlike restoration. Especially adore how you made that specialty tool for the valves and the thorough inspection with air compression with each one. Instant sub and like.
@Djeeyson5 жыл бұрын
Meus parabéns pelo excelente trabalho de restauração. Vc fez tudo perfeito, desmontou todas partes, não esqueceu de nenhum detalhe, revisou tudo... Fez uma pintura em poliuretano linda demais, ficou um espelho... São poucas pessoas que tem essa habilidade e capricho que vc tem, nunca vi uma restauração tão completa e perfeita como essa... Mais uma vez, parabéns mesmo, vc tem meu respeito.
@joaobosco2223 жыл бұрын
Você disse tudo que eu queria dizer com esse texto maravilhoso que todos que assistiram a esse vídeo gostaria de escrever para elogiar esse trabalho feito com esmero e utilizando de técnica ferramental apropriados. vagalume2020@gmail.com - Mariana - Minas Gerais
@franciscoaredes67795 жыл бұрын
Parabéns você é mestre na arte de compressores.
@marcelolobato83685 жыл бұрын
Restauração fantástica, parabéns .
@kylecorrow7025 жыл бұрын
Nice work man. From USA Las Vegas nevada! Amazing work!!!!!!!!!
@kennedymazzini20865 жыл бұрын
Que vídeo satisfatório, que trabalho incrível, merece todo respeito, assim como essas máquinas antigas, de qualidade, quando as fabricantes tinham carinho pelo cliente!
@brutosequipamentosfitness80465 жыл бұрын
Cara, que trabalho genial! Tá de parabéns mesmo, da até gosto de ver!
@billwilson89625 жыл бұрын
There are videos I watch that essentially change the landscape as to how I view the trades,,,,,,and this is one of those videos. Your talent and skill is amazing. I feel better for watching this.
@archeodigger5 жыл бұрын
What a superb restoration you did on that compressor! And the Emron paint job is the icing on the cake! lol Sadly, Emron paint was outlawed here in the US years ago due to it's nasty fumes. Used properly, nothing beats that kind of paint job! Thanks for sharing, it was quite entertaining to watch.
@horacerumpole69125 жыл бұрын
Imron paint HAS NOT been outlawed-Dupont will sell you all you want-
@jtee95485 жыл бұрын
@@horacerumpole6912 Yeah it's waterborne now. Maybe he means the original stuff that got popular in the eighties, super high VOC, super tough. Painter told me he didn't like repairing damaged bodywork with Imron paint, back in the day.
@jstephenallington84315 жыл бұрын
It wasn't because of the fumes, it was because it wouldn't break down naturally, either from any painted surfaces, or after any clean-up operations. The fumes alone were no better or worse than than any other Automotive application. The stuff did have a half-life similar to U-235, (that's an exaggeration, it wasn't quite THAT bad) and the excess was (preditable) ending up in the water supplies. Dupont still makes it as an Industrial Application, AND has a water-bourne version as well. Today, most high-heat applications use powder coat instead.
@mr.toliver27175 жыл бұрын
Uau 😲 incrível 👏 sua abilidade ficou fodastico 👏👍🙌
@frankstrawnation5 жыл бұрын
*habilidade
@danshaw67595 жыл бұрын
Y did you steal your profile pic? Lame
@doppler32375 жыл бұрын
i Thiago Oliveira-- why are you using this old Tony's profile pic? I concur, lame.
@Edvan100119715 жыл бұрын
Que trabalho maravilhoso uma obra de arte.
@abcd37255 жыл бұрын
Parabéns pelo trabalho! Ficou perfeito!
@mathuetax5 жыл бұрын
Wonderful job, hard to beat Imron for a nice hard gloss!
@randabuffer65624 жыл бұрын
This level of skill was amazing to watch 😁
@ruibubu5 жыл бұрын
Eu tô impressionado com a restauração! Parabéns meu caro!
@henriquedefaria68945 жыл бұрын
Simplesmente fantástico! Vc tem mãos de ouro, parabéns pelo excelente trabalho
@TafDotBr5 жыл бұрын
Incrivel, e n não sabia que erra brasileiro, parabens
@largoranch19955 жыл бұрын
Excellent work. Much respect.
@fock975 жыл бұрын
Sem palavras ainda! Deixo meus parabéns por esse trabalho simplesmente impressionante!!!
@Dangerrau5 жыл бұрын
Trabalho fantástico!
@garymucher95905 жыл бұрын
Very impressive rebuild. Bravo sir, Bravo!
@MrEddielay5 жыл бұрын
very nice job
@vinny71685 жыл бұрын
Assisti ate o fim ! Só tenho a dizer, capricho cuidado aos detalhes perfeição. Parabéns excelente trabalho!!!!!!
@mikewebb47305 жыл бұрын
Excellent, thanks for not putting a commentary, the workshop sounds speak for themselves. I like the piston-ring expander - have not seen one like that before.
@V8SKULLS4 жыл бұрын
That is a beautiful piece of working art you have got there. Damn so wonderful to see and watch your skills at work. Thank you so very much for sharing your journey with us. It was very impressive to see the mechanics of everything from start to finish, thanks again and God Bless
@lesd405 жыл бұрын
Beautiful, meticulous, job. Just like new!
@claudioluizmazzuchetti61675 жыл бұрын
Simplesmente um show. Parabens!
@diego_kaleu5 жыл бұрын
excelente adorei o seu trabalho. gosto muito de ver restaurações de maquinas antigas
@BasedBidoof4 жыл бұрын
I've never heard of anyone sleeving an air compressor before, pretty epic
@watahyahknow4 жыл бұрын
done a realy nice job on that one aspecially the compressor itself , those valves probably ended up sealing better then new and putting a cilinderbush in the cilinder was not something i would had considered (i would started to look for an oversized piston and honed the cilinder smooth ) the thing was made when quality sold product and products like these where supposed to be heirlooms it will probably last you a lifetime
@NL-sx6lm5 жыл бұрын
ótimo trabalho vou ver mais umas 100 vezes nao me canso de ver , parabens
@pablofelipe49575 жыл бұрын
Tudo ficou perfeito, desde a gravação do vídeo, edição e etc, teu trabalho de restauração é de alto nível, estilo hand tool rescue, parabéns mesmo, de verdade, gostei muito do vídeo, te desejo muito sucesso.
@boonster6665 жыл бұрын
Did notice after all that, the pressure gauge was not showing pressure accumulation
@ben5j835 жыл бұрын
New compressors you have to let the run for an hour before you allow them to build pressure to oil themselves.
@robkennedy30005 жыл бұрын
I also noticed that.. thanks for the info
@johnw63895 жыл бұрын
I thought I was going to be the only person to question that :o)... You learn something every day.... Nice compressor.
@JasonCarmichael5 жыл бұрын
@@ben5j83 The output valve looks closed though? Did this actually build pump air into it? 42:14, relief valve pulled? It looks closed to me? 45:54, is that open or closed? I hope open, but that looks closed to me also.
@TomasKubatCZ15 жыл бұрын
@@JasonCarmichael Quoting the uploader: "It's possible to see in 42:11 that the gage started to move. I didn't let it run long enough because there was a noise coming from the tank check valve that I fixed after the video. "
@24auhr5 жыл бұрын
0:37 breath taking scenery , just stunning .
@jzrgrmm3 жыл бұрын
Brazil has very, very pretty landscapes.
@smjones42385 жыл бұрын
Brought 'er back from the trash pile. NICE! Excellent renovation of an old classic pump. Great video!
@veniciuswasik62745 жыл бұрын
Simplesmente fantástico!
@brunopires85075 жыл бұрын
caraiii eu tava assistindo pensei que era canal gringo que eu sempre vejo hahaha não pensei q era br, so quando vi as coisas em português que percebi, muitoo bom.. muita qualidade seus videos, Parabéns +1 inscrit
@MrRafaelhsousa5 жыл бұрын
Eu tbm, gosto muito desses vídeos só me dei conta quando mostrou a retifica lá de BH
@FuquarProductions5 жыл бұрын
Wayne Compressor, built 5 minutes drive from my house!!
@joshuachaffee71064 жыл бұрын
FuquarProductions ah another hoosier is here i see
@FuquarProductions4 жыл бұрын
@@joshuachaffee7106 that is correct
@shakal365 жыл бұрын
Parabéns pelo serviço, fico ótimo.
@alandie5 жыл бұрын
Show. Parabéns. Belíssimo trabalho.
@sheep1ewe5 жыл бұрын
When things were built to last...
@w9gb5 жыл бұрын
Sadly, Wayne no longer in Ft. Wayne, IN During the late 1950’s, the Wayne Pump Company name was changed to Symington - Wayne to include the Symington - Gould Company in Depew, New York. In the next ten years the Symington - Wayne Company would experience more changes than just its name. The following decade saw controlling interest change to Dresser Industries. The Home Equipment (water pumps) moved to Harrison, Ohio. www.waynepumps.com/about-wayne/
@christophertstone5 жыл бұрын
Every generation builds some things to last, and some things disposable. The disposable things from the 1950s are all gone, so all you'll see now are the things they built to last. This makes it seem like everything they built was durable, but it's just Survivor Bias.
@mauriliobertucci10335 жыл бұрын
Não gostei o cara sò trabalha não.esplica nada .
@zenobiomenezesalvim13985 жыл бұрын
@@mauriliobertucci1033 Eu assisto muitos vídeos de restauração dos gringos eles também não falam nada. Não é necessário falar, é só acompanhar todo processo da restauração.
@muriloamaral255 жыл бұрын
@@mauriliobertucci1033 o objetivo do vídeo é só mostrar todo o procedimento de restauração, não é um passo a passo. É o tipo do vídeo que é assim.
@fnfrgjqltn5 жыл бұрын
если перед разборкой всё помыть - работать легче и приятнее.
@josecesarberlimjunior28555 жыл бұрын
Parabéns pelo empenho e pelo capricho.
@LTronicaAssistec5 жыл бұрын
O compressor mais maravilhoso e bem projetado que vi...e o seu trabalho foi estado da arte, que incrível parabéns
@Killerghia5 жыл бұрын
Wife says, "come on, time for bed..." Sorry I cant, I have to finish this video! Well done!
@jameshauge8525 жыл бұрын
Great video, but at the end it didnt look like it was getting any preasure on the gage? Is it that you didnt run it long enough or that it needs more work?
@VictorsShop5 жыл бұрын
It's possible to see in 42:11 that the gage started to move. I didn't let it run long enough because there was a noise coming from the tank check valve that I fixed after the video.
@jameshauge8525 жыл бұрын
@@VictorsShop i watched on a cell phone so i couldnt tell. Great job!
@WagnerDeQueiroz5 жыл бұрын
Trabalho Magnifico. Parabéns!
@bigornafilmes4 жыл бұрын
Esse tipo de restaração dá gosto de ver. Parabéns !
@user-vc2cg2fp8t5 жыл бұрын
качает или нет ? стрелка манометра на ноле
@alexprobkin55075 жыл бұрын
Я то же обратил внимание.По идеи должно показывать
@Anton_Karandin5 жыл бұрын
Качает. Он отсечку для видео минимальную поставил. Думаю что цель показать работу по реставрации, а не по возможностям давления.
@irekadbulvaleev13115 жыл бұрын
Ну блин всё равно же Super ребята да скажите, молодец чувак, как заводской 👍
@user-hj3uj6xq5c5 жыл бұрын
Просто все обкатывает на холостую он же все поменял, мужик знает свое дело
@aleksandrmanaenkov77855 жыл бұрын
Ничерта в них не понимаю, но может кто знает, зачем в нём два цилинра, почему второй маленький? Он давление добивает до высокого? Я правильно понимаю?
@kd5ahl5 жыл бұрын
what a labor of love! so glad to see someone restoring these lovely machines back to their glory!
@mauriliocamilo68955 жыл бұрын
Uma. Verdadeira obra de arte parabéns. Me. Faz. Lembrar. Os. Profissonais.dos. boms. Tempos. Ótimo. Trabalho.da. gosto.de. assistir. Um. Vidio. Assim
@nigelpearson29765 жыл бұрын
1) Timken bearings. There is a name I haven't seen in a while! 2) Loktite on a Nylock nut? (in the pressure switch) That's cheating. I though you would fit new black Nylon in the nut
@wildsonfurtado45164 жыл бұрын
foda-se
@res14925 жыл бұрын
This is a huge amount of work...you should be really proud of yourself for saving this from going to the scrapyard...Well done!!!
@iury45 жыл бұрын
Excelente trabalho, parabéns !!!
@WrenB1115 жыл бұрын
Just amazing. What a great restoration. Thank you for keeping it going another 65 years
@felipekira775 жыл бұрын
Uau, parabéns, otimo trabalho !! ficou perfeito.
@jorgecastilla96075 жыл бұрын
Victor' Shop Parabéns!! Dá gosto ver um vídeo como o seu!! Talento puro!
@ZippoVarga5 жыл бұрын
Fort Wayne is just 60 miles North of me here in Indiana. Beautiful restoration on that 2 stage compressor Victor! That Compressor has had a long journey and now it's ready for a new life! The Motor (Westinghouse) may very well have been manufactured right here in my home town of Muncie Indiana. Cheers from the US! Zip~
@maurilio285 жыл бұрын
Belissimo trabalho, profissional !
@hinz15 жыл бұрын
Finally a real restoration, with machining of replacement parts, new piston sleeves and everything that has to be done, when rebuilding such old machinery. The valve assembly is crazy on your compressor btw, with fine threads and lots of parts. My compressor has just press fit valve plate retainers and a lot less parts.
@vitortosetto975 жыл бұрын
Parabéns, ficou profissa!!
@markharris57714 жыл бұрын
An absolutely phenomenal restoration! It might be 68 years old but I reckon it will hold its own against any new compressor.
@edmilsonoliveira48905 жыл бұрын
ALTÍSSIMO NÍVEL COMO "THE GOOD OF THE LAND". UM LEGÍTIMO EXEMPLO DE PROFISSIONALISMO BRASILEIRO PRA NINGUÉM BOTAR DEFEITO. ÓTIMO VÍDEO. JOINHA COM LOUVOR!!!
@alannastasio73425 жыл бұрын
Boa noite...! Gostaria de parabenizar os mestres da mecânica pneumática e elétrica.....! Linda restauração, é realmente um trabalho de artesãos...!
@binhocaravan88565 жыл бұрын
Parabéns! Excelente vídeo!
@amicodimaddaloni5 жыл бұрын
Excelente trabalho de restauração Un vero professionista