MiSTer FPGA IO Analog Pro Board Review and Guide! Better Analog Video is Here

[@richarddukard8989]

I’m not gonna lie, I love the VGA port on my mister. It’s so convenient and those old school CRT and LCD monitors are so easy to just hook up and go.

[@VideoGameEsoterica]

It’s a well known port for sure but I like the move to the Saturn port. Those VGA cables I find to get heavy and put some strain on the device. At least the cables I use and like

[@HugYourCat]

@@VideoGameEsoterica i just with the DIN 10 cables were available from more places than misteraddons, other than composite.

[@VideoGameEsoterica]

There are some other vendors. I’ll try to source links

[@HugYourCat]

@@VideoGameEsoterica that would be really helpful thank you. my search has only turned up cables with wrong pinnouts like that directv one

[@VideoGameEsoterica]

👍

[@BRJedi]

I do think the Saturn DIN is useful in certain situations, but VGA is a MUCH MUCH better port imo. The fact you can screw it in to ensure a connection and don't have to worry about bent pins, it makes it a much better physical connection. I wish he had both options available.

[@VideoGameEsoterica]

I can’t say I’ve ever seen bent pins on a Saturn port. What are you doing out there to bend them? Lol

[@sega_kid4288]

Nah man there’s no sound in vga so you need another cord. Just follow the arrow on the lead you will never bend a pin plus if you do need noses work great

[@HugYourCat]

@@VideoGameEsoterica its not so much about that, it's that this pinout of DIN 10 is not universal at all and is in fact very hard to find. I literally could not find one cable for it other than the misteraddons ones, except for basic Saturn composite cables, and i think s-video. no component or any other output was available, whereas with vga, adapters are plentiful and cheap. vga is way more universal and this is practically a bespoke plug. however, other than that gripe, i love the board

[@VideoGameEsoterica]

Ooh putting it in upside down

[@harleyn3089]

@@HugYourCat I agree 100%. VGA cables are easy to find. I have several already, so I don't even need to buy one. And Startech makes VGA to component cables, so I can get them on Amazon, Newegg, and everywhere else that carries that brand. Just yesterday I spent half an hour looking for the micro hdmi cable for my Raspberry Pi 4. (It was hanging off the back of another raspberry pi.) If it had full size HDMI I would have that half hour back. I feel the same way about the proprietary 5v plug on the PSP. I even have a DAC that has a proprietary I2S port that I literally can't find an affordable cable for. In my opinion all devices should use standard power and video ports, so I don't have to keep track of proprietary cables. Like I said in my other comment, I won't be buying this board because of the video port they chose.

[@jimkincaidz]

Perfect timing, ordered mine yesterday! Can't wait for that Degub mode!

[@VideoGameEsoterica]

🤣

[@StevetendoMii]

I think the new board really cleans things up. Between having a connector that handles both video and audio, not needing an extra adapter for s-video, and cleaning up the power situation, I'm sold. Admittedly, I'm not the biggest fan of the circular Saturn DIN, but I think the benefits outweigh the time I will spend figuring out which way is up on the connector. I'd love to see a comparison between 18 bit and 24 bit color options to see how much better it looks.

[@VideoGameEsoterica]

A comparison is V hard to shoot as I need to shoot it off a CRT and that generally is ugly and you get moire in spots that you’d never see with your eye. One of those “hard to show in camera” differences that’s immediately apparent if you are just using your eyes

[@Wobble2007]

Jut google 18_bit vs 24-Bit colour banding for an idea on the difference.

[@mbe102]

USB C and Saturn AV, thats just perfect. OMG the dual RAM Analog is FINALLY HERE!!!! HELL YEAH! MisterAddons kills it. Stoked!!!!!!

[@VideoGameEsoterica]

The new power arrangement is V nice

[@tonybogard6888]

I run my analogue based MISTer in RGB on an old Sony 2530 PVM. My buddy turned me on to Extron stuff and I use an RGB 203 Rxi as an interface for H and V adjustments. It looks superb! The composite and S video picture is excellent as well. I’d love to upgrade to this board and see how Ninja Gaiden 3 looks while I practice its punishment.

[@VideoGameEsoterica]

It makes everything look a tiny bit better but it makes cores than can support 24-bit color a LOT better

[@harleyn3089]

I don't like the change to the Saturn video port. I realize the advantages, but I already have VGA cables and VGA adapters, so it's an extra proprietary set of cables I need to buy. Honestly, it's a deal breaker for me and a reason to choose a different analog IO board.

[@Vvewa]

plus changes to your case if you are using one

[@VideoGameEsoterica]

It’s diff than VGA but I appreciate it

[@VideoGameEsoterica]

Yes you do need to change the backplate

[@Vvewa]

@@VideoGameEsoterica you mean dremmel :)

[@VideoGameEsoterica]

Lol I guess you could but there will be new backplates avail too

[@ngbf2900]

So, how does the Pro board video quality compare to the original board with VGA port? Honestly the original board with that d-sub to BNC break out cable looks absolutely amazing on a PVM/BVM as it is from years back.

[@VideoGameEsoterica]

The quality and color accuracy see a bump. Those extra bits in the color reduce down banding a lot on CRT. That’s the real night and day difference

[@drewba7741]

Also worth mentioning that it removes the toslink port, so you can only use mini toslink for optical audio. Important for us who use dedicated amps and dacs on our setups.

[@VideoGameEsoterica]

Just not something I have in my setup but noted 👍

[@Wobble2007]

i2s HDMI is the best audio option for MiSTer, gives you immaculate lossless 32-Bit with zero clipping or jitter.

[@drewba7741]

@@Wobble2007 Nothing you're playing on MiSTer goes above 16 bit, 44.1 kHz (CD audio). Curious about the chipset the MiSTer uses for digital audio.

[@Wobble2007]

​@@drewba7741 Beg to differ, stock N64 audio sounds pretty stretched out on a pair of 500watt RMS floor standers, it's not until you upsample and raise the sound stage that it really comes to life, though 16-Bit 44.1Khz if fine for most peoples setups, once you hear the N64 OG version of MM beautiful synth soundtrack in 32-Bit 768Khz or DSD512, you really do appreciate it, you can also just use DAC aggregation to thicken up and make the audio much richer/fatter, 4 PCM5100B DAC's will feed any speaker set and amp nicely and only cost 5 bucks each, so you don't have to spend a fortune to get higher resolution audio, just don't do what Grezzo did with MM3D and smother it in reverb, ruins the observatory synth track, flanging would have made more sense.

[@Wobble2007]

@@drewba7741 ​ Beg to differ, stock N64 audio sounds pretty stretched out on a pair of 500watt RMS floor standers, it's not until you upsample and raise the sound stage that it really comes to life, though 16-Bit 44.1Khz if fine for most peoples setups, once you hear the N64 OG version of MM beautiful synth soundtrack in 32-Bit 768Khz or DSD512, you really do appreciate it, you can also just use DAC aggregation to thicken up and make the audio much richer/fatter, 4 PCM5100B DAC's will feed any speaker set and amp nicely and only cost 5 bucks each, so you don't have to spend a fortune to get higher resolution audio, just don't do what Grezzo did with MM3D and smother it in reverb, ruins the observatory synth track, flanging would have made more sense.

[@seecon3806]

Is there a quality difference over direct video mode with no IO board? I have read that direct video can also support 24 bit color.

[@VideoGameEsoterica]

It all depends on the DAC. So it’s a hard question to answer

[@TroyRackley]

Are you using a Saturn DIN to BNC connection to the CRT? or a Saturn DIN to VGA and then VGA to BNC? My 21 inch Trinitron has both inputs VGA and BNC.

[@VideoGameEsoterica]

BNC

[@bearonguitar]

Do the cores require updates to correctly work with the 24-bit video output?

[@VideoGameEsoterica]

So long as you’ve run update all recently the cores that support 24 bit color will be ready to give you those six extra bits once set

[@CHIBItheSPARROW]

Thanks for the review. Personally, I'm waiting for their other variant, the IO Direct. Seems like a much better option and you only lose double video output which I don't care for.

[@VideoGameEsoterica]

I’ll show that once it’s available

[@Wobble2007]

Has better reference grade RGB too.

[@gsggshhhh455]

Love that Escape from New York poster!!

[@VideoGameEsoterica]

Finally someone comments on it haha

[@nickstarlingch]

Thanks for the review! I ordered mine a few days ago, waiting for that to ship now. Spent way too much on my Mister system(like $550) riiight before Taki Udon announced his clone board, and they were out of the analog systems so I just grabbed a digital dual-RAM system and waited a few months. Really kicking myself for not magically anticipating Taki's clone board, I spent my annual bonus on my Mister, but this board's looking pretty promising. Picked up a SNAX64, a few Guncons(each gen) and a Jogcon for Ridge Racer 4, so I should have a pretty rad setup soon. Edit: He didn't have the rear panels in stock, btw, hasn't had them in stock for months, so I just plan on having an open butt on my Mister. Not ideal, but I can't keep waiting, I've waited years to use this nice 32" CRT for some real retro gaming.

[@VideoGameEsoterica]

You won’t regret the price. For what it does it’s a “bargain”

[@Wobble2007]

You can build a MiSTer setup for little more than £150 all in, just get a second hand DE10 Nano of fleabay, I got mine for £75 including a 256GB already setup SD card, a V2.9 RAM module for 20-30 squid, all you need then is a either a REFLEX PRISM for just about every video output format available, HQ audio and an Xbox 360 gamepad that you probably already have lying around, or if you want to keep costs under £120, just use a GBS-C board, which you can get for £25 and will give you VGA, RGB, S-Video etc, you can build a MiSTer for dirt cheap.

[@nickstarlingch]

​@VideoGameEsoterica Sure, but the Taki clone system's like $400 cheaper. It's hugely higher-value than prior systems but I could've saved hundreds of poor-person dollars by waiting a couple months - that's 1,000% regret zone. Also waited since Monday for the Mister Addons analog pro board to ship, no updates. During that period I purchased a Guncon 1 from Japan, two Guncon 2s and two Guncon 3s from the USA, and later a Jogcon from the USA. The US Guncons arrived two days ago, the JP Guncon arrives Monday and the Jogcon arrives Monday. Analog pro board hasn't even been shipped. Not feeling Mister Addons, tbh, comes off very rude in messages on his site when I send him polite inquiries. And it's absurd that he gets the analog boards in stock but doesn't have any back-plates ready in time, so I'm gonna have an open-assed, super-premium-priced Mister. Good on him for sponsoring you, you're my favorite retro gaming channel, but I'll be funneling friends Taki's way.

[@VideoGameEsoterica]

That’s a couple guncons lol

[@daldladla]

Oh thank goodness!!! I just got mine and just hooked up to my crt and everything is black snd white and skipping! Looking forward to hopefully finding the fix here!

[@VideoGameEsoterica]

That’s odd. What video format you using?

[@daldladla]

@@VideoGameEsoterica I'm using S-Video. Same results with composite. Nothing I do in the ini seems to help.

[@VideoGameEsoterica]

Check your SOG switch

[@cortbelmont]

I'm more interested in the USB power supply. There's a problem causing noise on the DE10nano by using just any power supply, is that problem still present for USB power supplies? with the tap to project, external SSD, controller batteries, Wi-Fi and BT the MiSTer power requirements are larger than what the OG PSU can do

[@VideoGameEsoterica]

Noise? Like in the audio signal? Unsure what you mean

[@troyolsson5501]

Can you bypass the USB’s power and still use the barrel plug splitter if you want? I bought a pretty nice power brick that gives me a longer cable. Thanks!

[@VideoGameEsoterica]

I’ve never tried honestly

[@elphive42]

The analog out was often useful for monitors where the digital output wouldn’t recognize, as their VGA ports were generally more tolerant of odd signals. This now requires a proprietary adapter for that use case, which is a bit disappointing. Moreover, I’ve had some pretty significant issues over the years with SEGA’s Mini-DIN video jacks, which has me a bit concerned. They have a habit of getting loose over time, to the degree that the metal indent on the connector housing bends itself out of shape after normal use and has to be bent back with pliers to ensure a proper connection. (If I don’t do that, I lose at least one of the three video color channels over time and have to adjust the position of the cable to get it back.)

[@VideoGameEsoterica]

I can’t say I’ve had that issue with the connector at all and this is what Sorg went with on the reference design

[@ManweruEmanuilov]

Didn't quite understand how light guns will work. No need for a breakout board or a cable with an extra connector with this new board?

[@VideoGameEsoterica]

If you go port to composite or port to component you just tap the signal for the GunCon there. Since you don’t need a breakout board for composite any longer with this IO

[@Berzerk67]

I don't see how this is gonna work well with scart? With the old board, I have a VGA to Scart adapter and get Audio with RGB straight to my old CRT without and extra audio connection. Scart was a huge thing in Europe.

[@VideoGameEsoterica]

You can just get audio from the audio port. Plenty of cables will accept that audio and put it into the SCART connector

[@Berzerk67]

@@VideoGameEsoterica So I need an "Saturn Din and Audioport to Scart-Adapter"?

[@TainakaRicchan]

Very interesting. Is this MisterAddons exclusive, or is this a public design, that could be sold by the other retailers as well? because shipping over the ocean, plus taxes, is gonna be really expensive.

[@VideoGameEsoterica]

24 bit IO is a new design for MiSTer so you will see diff iterations from diff vendors

[@myretronation]

is there a Saturn DIN to VGA cable? would this be an improvement versus using the standard HDMI output to a RetroTink 4K?

[@VideoGameEsoterica]

That cable I’ve never seen before

[@ar-game-test]

Do you know if these pro versions work with Takis clones? De10 clone, ram and usb hub + Mister addons pro analog?

[@VideoGameEsoterica]

Not 100% sure yet

[@ar-game-test]

@@VideoGameEsoterica If you find out please post. Strange Taki when with VGA since all new Analog boards switched to Saturn style

[@geoffnaylor3734]

A huge PSA for everybody is that someone has made pulse with modulation cores for Saturn, PlayStation and N64. These cores give you the exact same 24-bit result out of the analogue board, but it works on the V1 analogue board so no new purchase required.

[@VideoGameEsoterica]

No. Just diff cores. Although the accuracy of the signal won’t be that 99%

[@geoffnaylor3734]

@@VideoGameEsoterica How can you be sure it's not as good though? We'd have to show PWM vs OG vs Direct video vs analog board v2 to know that. We're getting 24 bits via PWM so I don't see fundementally what the v2 board should have over those cores.

[@tgeorg12]

Could you do a color comparison? How much of a difference is 24 bit color?

[@VideoGameEsoterica]

It’s not so much color as it is smoothness in gradients. You lose the color banding you see in 18-bit output

[@Wobble2007]

Think I'm just gonna build a second MiSTer build, so I have one for my desk setup and one for my TV setup, the second one I can build with the I/O direct & BliSTer, plus dual V3.2 SDRAM modules, plus a i2s waveblaster header for installing an internal original 90s Yamaha MIDI GS/XG module and a CM6631A DAC for those phat analogue oscillators, I'd love to install a CMSLPT TSR as well, which has dual Philips SAA1099P sound chips for that beautiful rich sounding real-time chip tune audio (PSG), would love to install a OPL3 as well, but not sure if there would be enough I/O left to do so, but if I could, I would have the trifecta of synth hardware (PSG/FM/MIDI), I could also just spend a bit extra (£140) and get the DREAMBLASTER X16GS, which does all synth standards and does them beautifly, it has a Dream/Roland GS Bank (officially licensed, ROM bank), Dream CleanWave Bank (official, Buran Bank, OPL3-FM General MIDI bank, GXSCC Chiptune bank, plus a powerful DSP for multiple efects and what not, it will cover every MiSTer system there is, and systems like the X6800 and Amiga can use multiple audio standards, like Street Fighter 2 on the X6800 has a beautiful chip tune soundtrack mode, nothing beats real chip tune music playing through a real phat analogue oscillator.

[@VideoGameEsoterica]

Hell of a setup

[@Wobble2007]

@@VideoGameEsoterica If I can find a second hand DE10 it might be worthwhile, I use Roland Sound Canvas 3.2 on my current MiSTer via an Intel M5 X86 compute stick and a CYP DAC, sounds pretty damn good for soft synth, but I heard my neighbour's Dreamblaster X2GS on his MiSTer setup the other night, and it just blew me away to be honest, so much richer and fatter than soft synth.

[@VideoGameEsoterica]

@Wobble2007 your neighbor has a MiSTer too? Nice

[@Wobble2007]

@@VideoGameEsoterica Yeah, they are getting pretty popular now, will be even more so when the 99 dollar one hits, maybe not as popular as the Raspberry Pi but MiSTer is just the first of many FPGA platforms I hope.

[@VideoGameEsoterica]

Let’s hope that equals more viewers haha

[@StardustX7]

Thanks for the video, very interesting. Will the lack of a secondary SD port be a problem for some cores? X68000 needed it last time I checked iirc Even for cores where you can replace it with a VHD file, I find it a bit annoying.

[@VideoGameEsoterica]

X68000 does not need a secondary SD to work

[@etvow]

I don't own a Mister yet but seriously thinking about getting into it. I have a 20 inch flat screen CRT TV that has component connection. I have it connected to my modded Wii and PS2 for occasional old school gaming. If I were to get a FPGA system, with my Sharp 20 inch flat CRT ( I do not own a PVM), will I benefit any from using the Saturn output rather than VGA output for sure? Or is VGA good enough?

[@VideoGameEsoterica]

Both are great for component. You can’t go wrong with either

[@etvow]

​@@VideoGameEsotericaOk thank you.

[@VideoGameEsoterica]

👍

[@WhatNowMaxTVchannel]

I would have loved to see a comparison between the old analog board and the new one :(. I'm so tempted.

[@VideoGameEsoterica]

It’s such a hard thing to shoot since it’s all shot off CRT unfortunately. Which I find ugly and never really seems to show things as I see them

[@WhatNowMaxTVchannel]

@@VideoGameEsoterica Yeah I get the struggle LOL. I did an unscientific comparison between my n64 console s-video out vs the old analog io board with mister's vga port to the same CRT and I honestly can't tell the difference (other than sharpness difference inherent to s-video vs component). For me at least, this isn't worth the 65 dollar board, plus getting a new enclosure, plus getting a 35 dollar cable that is 65 dollars from the trusted places I'd normally get it from (how is it only 35 dollars?? I'm suspicious).

[@VideoGameEsoterica]

The cable from Porkchop? Def don’t be suspicious. I’ve used his stuff the entire 4+ years I’ve been doing MiSTer videos. Zero issues rock solid reliability that entire time

[@Zalibidas]

im curious if retrocastle will do a new board as well. love his stuff.

[@VideoGameEsoterica]

Not sure what their plans are. Not a maker who I’ve ever chatted with so I find out what they are doing next the same time you do

[@Zalibidas]

@@VideoGameEsoterica think there is a bit of a language barrier but hes posted a few times in the mister discord. he had the saturn port and usb c for a long time on his boards and even threw in usb on the board to make things smaller. i feel like this board brings things close to perfection. now if usb could also be somehow integrated into the board it would be perfect

[@SuperSteve152]

This is a great video. Thank you for doing it!

[@VideoGameEsoterica]

Glad you enjoyed

[@marcinmorun]

The inclusion of the usb-c port is tempting me, but, if there is no benefits if you're an hdmi user, is it still worth to switch for the pro model?

[@VideoGameEsoterica]

No other change no

[@MegaManNeo]

Sounds interesting. Would be cool if you test this new board with the clone FP10.

[@VideoGameEsoterica]

Perhaps in the future

[@MegaManNeo]

@@VideoGameEsoterica Obviously when you have the device to test it yourself :,D

[@VideoGameEsoterica]

Haha yes. Which is not now

[@nonplayercharacter596]

Big Trouble is my favorite movie of all time

[@VideoGameEsoterica]

It’s the second best John Carpenter movie ever made. 1) Escape from NY 2) Big Trouble and 3) The Thing

[@kosmosyche]

Escape From NY, The Thing and Big Trouble for me.

[@kosmosyche]

Also, in my opinion Snake Plissken is the best and most iconic role by Kurt Russell

[@VideoGameEsoterica]

He wasn’t too bad as Santa either lol

[@sega_kid4288]

So is this new board better than doing direct video through HdMi? I may still get it anyway as the USBC and power button are interesting but I’m wondering how much better would the video quality be?

[@VideoGameEsoterica]

Direct video is just as good as the DAC you use. So it’s hard to say. Best bet is go analog directly from an analog IO

[@MidnightMusicClub]

Is this going to be a significant improvement over the YC Active Encoder Board for S-Video/Composite out or is it probably not worth the price of upgrade if you already have one?

[@VideoGameEsoterica]

Accuracy should be improved and since it incorporates it it’s a cleaner setup. But is the improvement worth you upgrading? That’s up to you to decide

[@_BELMONT_]

3:30 how dare you! Jack Burton is a national treasure! haha

[@VideoGameEsoterica]

I’m not saying he isn’t. I’m just saying Snake Plissken is better lol

[@sajk]

Love getting upgrades like this! Personally as an owner of a digital board using analogue over hdmi to my CRT I wouldn't buy it due to too many dealbreakers : saturn port, single ram, loss of power switch (sync on green should be a setting not a switch). If/when all that is solved (maybe some of it will be solved by Taki's clone) I'll hapilly hand over my hard-earned cash. Also I love the idea of dual video out but that's not available with dual ram.

[@VideoGameEsoterica]

You might want to look at the upcoming IO board from Porkchop then which will allow for dual ram and digital pass through for direct video analog. Just isn’t done yet

[@sajk]

@@VideoGameEsoterica I'm just too greedy and I want it all: Dual Ram (that hardly anything uses but I bought it so going to Single Ram seems like a downgrade), Power switch : I've just got used to using this and it's so much nicer than having an external switch or pressing down on my mister stack, so for me the upgrade would be 24bit / Much cleaner video and dual simultaneous video (but I can't have that because it's an either/or choice). Like a lot of people I'm happy to pay for upgrades as long as there aren't any compromises in other areas or unnecessary extra costs (having to buy new cables, etc). I do have to balance all that by saying I absolutely love that people like MisterAddons/Porkchop are keeping the scene alive with new hardware, it's just that I'm stuck now waiting to see what Taki delivers because imho these boards miss the mark and aren't enough of an upgrade for old users but are probably good enough for new MiSTer owners.

[@natese8406]

I'm hoping with this analog board I can output accurate composite video without dot crawl or rainbowing effects caused by adapters. I'm not sure if the current native composite cores using an analog board achieve this. If anyone knows please leave a comment. I currently have a digital only solution and use the the Axunworks converter in my DAC chain to output composite. It has a pot to adjust the dot crawl etc that works great to remove most artifacts (most people don't know it has a pot). Still if a better composite solution can be had from native composite cores I must give it a try.

[@VideoGameEsoterica]

How is that Axunworks deal? And how long did it take to arrive? I’m thinking about picking up some hardware from them

[@natese8406]

@@VideoGameEsoterica It works great, and arrived in a month or two which was sooner than I expected. Just be sure to use the pot to adjust dot crawl / rainbowing or you'll think it's garbage. The image is also as sharp as my extron s-video to composite solution which people talk highly of. On the customer service side, be aware that if you email them they take a while to respond and English isn't their first language, but I was able to understand them just fine, and they were polite and answered the questions competently.

[@VideoGameEsoterica]

I’ve wanted to grab a supergun from them. Just haven’t yet

[@natese8406]

@@VideoGameEsoterica Those look cool! I don't have an arcade light gun solution yet, but I really want one, so if it's good I hope you'll let us know!

[@VideoGameEsoterica]

I have a few solutions but obv they all require CRT TVs

[@johnsundberg7697]

What's the point of the saturn din output? Deal breaker for me, what a shame.

[@VideoGameEsoterica]

Just a design choice. There is one cable that’s universal for all the diff video signals. I’ve always felt personally that good quality VGA to X cables put some undue strain on the port due to how heavy those cables are. At least the ones I use and trust the signal quality on. I’ve shown that in some analog videos where the cable wants to tip the MiSTer at like a 45 degree angle

[@METR0lD]

I came for the IO analog pro board review. I stayed for cat pen.

[@VideoGameEsoterica]

And you stayed longer for Escape from NY

[@FridayNightArcade]

I was under the impression the original analog out board was as good as we were going to get lol. I don't wanna have to rip the thing apart again and spend more money.

[@VideoGameEsoterica]

You don’t have to. Og analog board is great. This is just better. There’s no need to upgrade. It’s optional

[@billconiglio4024]

Did I see Jack Burton screen printed on the PCB? 😂

[@VideoGameEsoterica]

Hence my Escape from NY shot

[@Bradofosho]

Not gonna lie I would buy this for the power button alone haha.

[@VideoGameEsoterica]

I wouldn’t blame you. I’m not a fan of the inline switch

[@matthewhall6288]

DEGUB. Pretty funny.

[@snintendog]

All the Magic smoke this new board will make. /s I swear all the Mars idiots are at it AGAIN.

[@VideoGameEsoterica]

Huh?

[@WilliamVentura]

Kinda meh for me this is only for 2 cores. Direct video works fine. Don't see the point

[@VideoGameEsoterica]

Like anything the point is if you want it you can do it

[@TrevHolland]

hnnnnng!

[@VideoGameEsoterica]

Lol

[@bearonguitar]

Firstest!

[@VideoGameEsoterica]

Second first

[@Ragesauce]

FIRST!

[@VideoGameEsoterica]

You’ve got copycats

[@Reprogrammed_By_SEGA]

@YokomoHoyo beat you, Time for you to retire.

[@Ragesauce]

@@Reprogrammed_By_SEGA hehe, mine says 16 minutes ago, his is 15 so...FIRST! ^_^

[@Ragesauce]

@@VideoGameEsoterica They will try, but i'm just too quickity quick quick.

[@VideoGameEsoterica]

@Reprogrammed_By_SEGA 🤣