This video shows how to fix the vertical barline of a Viewplus curve monitor. model MH-24CH. Tips and Tricks. please like, share, and subscribe. thanks.
Пікірлер: 114
@CATgadgetsandDIY2 жыл бұрын
i like the confidence. "I will fix it". ang iba kasi "I will try to fix it"
@worroSfOretsevraH Жыл бұрын
Please explain how and why this fixes it?
@marcoandraszanconatomarco6855 Жыл бұрын
So it's possible that those resistors have short circuited and that's why they were quiet but they unsoldered to see if the cables from the screen were unsoldered from the pcb but they stopped resisting
@CATgadgetsandDIY2 жыл бұрын
ang galing. pwede pala yun. curious ako kung ano ang long term effect pag wala ang mga parts na yun? kasi hindi naman ilalagay yan kung walang purpose
@tevzTVTevatronics2 жыл бұрын
Pag na tanggal mga yun , maging lower quality sa kablia, hindi lng masyado mahalta.;
@chahidMostapha-no2qd3 ай бұрын
Merci beaucoup de traduire en françai 😅bon courage tankyou maroc
@NJaaayeeee Жыл бұрын
How to fix when the screen is blurry and cloudy I'm using VIEWPLUS | ML-24CH | 165HZ MONITOR | 23.6" currved gaming monitor? is there any best setting for the issue?
@SrslyJoking1611 күн бұрын
boss same issue but viewpoint monitor. same lng kaya ng solution?
@BrandonesRJ Жыл бұрын
Hi, I have a samsung curved monitor model C27HG7x and this problem occurs when I turn it on, but it heats up and the lines disappear. what would be the solution?
@tevzTVTevatronics Жыл бұрын
the panel I guess.
@สุพัฒน์มองทัง Жыл бұрын
Good great best job thanks for sharing your master 👍🏾👍🏾👍🏾👍🏾👍🏾❤️🙏
@superbrokes Жыл бұрын
hello sir can i message u i do have some monitors that has different problem will to pay for repairs po
@Chihuahua454525 күн бұрын
I have a split screen would this work it fell from the desk and has one side that’s has the same image
@heinz29875 ай бұрын
Good day sir baka po pwede nyo ako macontact nasira din kasi monitor ko
@hjorte. Жыл бұрын
Please explain how and why this fixes it.
@tevzTVTevatronics Жыл бұрын
The LCD panel has a two-gate signal on the left side and right sides of the LCD screen. the left and the right gate signal is connected in parallel. If one of the sides has shorted gates, the screen will flicker or distort the image. If you cut the shorted side, the image will be normalized. Because the connection is parallel, The LCD still has the other side work. But the side has the shorted will be darker or like lower resolution.
@harlyaguilar99112 ай бұрын
sir may inaayos akong ganitong monitor... inangat ko na ang mga resistor..pero no luck.. may ibang paraan paba mag bypass? salamat po
@Klaud_Gaming3 ай бұрын
Meron akong ViewPlus ML 24 na may horizontal flicker din. Same procedure din ba kapag horizontal?
@ruryalvarest8573 Жыл бұрын
My monitor has this flickering at the bottom side of the screen. It starts to appear after a few minutes of using. Do i need to buy a new one or can i still fix it?
@JayzeeTech3 ай бұрын
Sir binalik nyo pa po b mga capacitor??or Hindi na po??
@mr.sunnymahiwal4199 Жыл бұрын
Mind-blowing sir ,you are true engineer in sense
@goodelectronics41702 жыл бұрын
Galing master
@pinroshan02010 ай бұрын
Dude why are you using AI voice? Omg
@nikozambrano59762 жыл бұрын
thanks sir tev
@omarkasijo9713 Жыл бұрын
I have a dell 22" with the same problem, can this method solve the problem?
@tevzTVTevatronics Жыл бұрын
Im not sure
@Zak.r_photography Жыл бұрын
I have the same problem, exept i dont know how to fix it and theres no obviously bad chips or anything, tried the ribbon cables and display cables but nothing had changed
@patricktamunday61692 жыл бұрын
pwede p pala ayusin ang mga ganyan sir? may ganyan ako HK vision ganyan din problema. un lang baka walang magaling na tech duto samin
@tevzTVTevatronics2 жыл бұрын
hindi lahat pwede magawa. taga saan ka ba sir?
@dimitra.d7926 ай бұрын
sir in lg s70a monitor i have logo normal and set the menu but when i try to connect with someone source via hdmi it says it doesnt exist signal i noticed the basic ic of the mainboard is very very hot in your opinion from where is coming this hot bad contacts between ic and pcb via balls and needs reballing or there is someone shunt ? thanks on advance
@aldwinduque-ix4ih Жыл бұрын
Sir pano naman ayusin yung 24 mh na hindi curve glitch problem iba kasi yung panel board ng curve. Salamat more power.
@aldwinduque-ix4ih Жыл бұрын
Same brand view plus din
@tevzTVTevatronics Жыл бұрын
malamang ganyang method din, hindi kasi pare-pareho ang symptoms.
@nerwinflores7235 ай бұрын
boss ganyan din sakin pero may display sya pero sa pinakadulo may blerd pano po kaya ayusin
@pathiranagamagesarathdisan3540 Жыл бұрын
Good boy
@ronaldtamboy Жыл бұрын
sir meron ako 27inch viewplus led monitor after 10 minutes nag start siyang mag white display. ganyan method din po kaya pwede gawin.
@christinejoypalattao781 Жыл бұрын
Boss sakin hyc 24" ganyan din problem patulong sir salamat
@tevzTVTevatronics Жыл бұрын
malamang ganyan din ang sira.
@fakepewdiepiechannel5129 Жыл бұрын
Sa akin boss 23 inches viewplus regular pc monitor ganyan din may mga lines. Pareho din kaya ang pag ayos jan sa video mo?
@JayzeeTech3 ай бұрын
I will try it in my specterpro
@moviecell13352 жыл бұрын
Thanku sir
@nilocosmeph60822 жыл бұрын
newbie is watching master
@tollertup7 ай бұрын
My HP x24C just died, same vertical lines. It uses the same panel too!! I removed the resistors and its working again! many thanks :D
@niceguy21328 ай бұрын
only take out the resistor can fix the problem?
@jazzycantswim98082 жыл бұрын
pag nagkaka ganyan na yung mga monitor natin boss, naayos pa naman yan no?
@tevzTVTevatronics2 жыл бұрын
Hindi lahat
@72Yaca Жыл бұрын
Is there no other solution?
@tevzTVTevatronics Жыл бұрын
No at this tme
@richardlaque21372 жыл бұрын
EXELENTE
@Nostalgic1572 Жыл бұрын
Hello sir tinangal ninyo po ba yong mga yan?
@luigilouissecong95218 ай бұрын
Sir,ganyan din monitor ko same brand,Ang problem nya is no display. Maaayos pa po bah sir?
@tevzTVTevatronics8 ай бұрын
depende kung ga ano ka lala sira
@8but544 Жыл бұрын
san po shop nyo? para madalaw namin
@user-dw6fj1py1o2 жыл бұрын
Good Job at work repair TV!
@tevzTVTevatronics2 жыл бұрын
Thanks!
@user-dw6fj1py1o2 жыл бұрын
@@tevzTVTevatronics you're welcome.
@patrykpieczynski9701 Жыл бұрын
@tevz how about issue like this? kzbin.info/www/bejne/hnvMf5Kpgrypi9E Samsung c32hg70 after warming up is okay.
@tevzTVTevatronics Жыл бұрын
Cutting CKV line.
@patrykpieczynski9701 Жыл бұрын
@@tevzTVTevatronics If I cut even one line on right or left image is pernamently distorted with lines. I try cutting and soldering lines one by one on both sides.
@unicohijogaming Жыл бұрын
hello san po location niyo? and may naririnig ako na nag iiloco,may viewplus 27 165hz din po ako and kakasira lang. black screen lang siya and parang working naman siya. di ko lang sure baka backlight or anything. kasi pag sinaksak ko hdmi/dp may audio naman siya and nadedetect pa rin ng pc ko as monitor. so if po baka po dalhin ko sa inyo pag malapit lang kayo sa location ko thanks!
@tevzTVTevatronics Жыл бұрын
Laoag city ako.
@unicohijogaming Жыл бұрын
@@tevzTVTevatronics boss nag pm nak dijay page yo thanks!
@KieranL3x11 ай бұрын
Bos black screen paano? nagpapakita yung viewplus logo pero black screeen, Capasitor ba or Bypass gayahin koto?
@tevzTVTevatronics11 ай бұрын
try mo bypass
@KieranL3x11 ай бұрын
@@tevzTVTevatronicsWalang umbok yung capacitor. Pwede kaya to.
@kimgalang1473 Жыл бұрын
How about the 27inch is this the same?
@tevzTVTevatronics Жыл бұрын
no
@kimgalang1473 Жыл бұрын
@@tevzTVTevatronics can u content the 27inch viewplus 75hz
@tevzTVTevatronics Жыл бұрын
@@kimgalang1473 will do. stay tune
@tuyingcruz23832 жыл бұрын
wow good job
@ewardw6062 Жыл бұрын
Why not check with resistor is faulty and just change the bad component instead of bypassing
@tevzTVTevatronics Жыл бұрын
its the panel issue no other componnents.
@jhamilsalvador542 Жыл бұрын
nag gaganyan monitor ko kapag ng gagames na ako ☹️ dko alam kung gpu ba or monitor na
@natarajriya5550 Жыл бұрын
🎉🎉🎉🎉🎉❤❤
@viciousdia34422 жыл бұрын
Paano sir if my cloudi ng sa side part ng monitor?
@tevzTVTevatronics2 жыл бұрын
wala akong idea pag diko makita yung image.
@tagumpayjr.santiago99002 жыл бұрын
sir how about viewpoint 32 inch
@tevzTVTevatronics2 жыл бұрын
Not yet tried
@geovani606242 жыл бұрын
what did you bypass?
@tevzTVTevatronics2 жыл бұрын
Ckv lines ang vgh even and odd.
@geovani606242 жыл бұрын
@@tevzTVTevatronics thanks, I'm learning a lot from your videos
@geovani606242 жыл бұрын
@@tevzTVTevatronics I have a 60 pins (2 30 pins connectors) display that I wanna put in a tv with a 80 pins (2 40 pins connectors) display, have yoy already done a video about an adaptation like this one?
@tevzTVTevatronics2 жыл бұрын
@@geovani60624 60 to 40 pins LVDS is not easy to adapt. But there are ready made adaptors that you can buy online.
@ILoveSaoirse4Ever2 жыл бұрын
Sir paano po kapag HKC M24G3F naggarbage display po. Sana mapansin. More blessing to you sir.
@tevzTVTevatronics2 жыл бұрын
posible pasata kapareho ng lcd pannel sa nasa video.
@ramezaziz71512 жыл бұрын
very good
@tevzTVTevatronics2 жыл бұрын
Thanks
@jolodeocampo Жыл бұрын
@@tevzTVTevatronics boss ganyan din issue ng monitor ko same brand and specs ng.monitor sabe sakn panel na daw problem
@alec67802 жыл бұрын
saan po kayo located?
@tevzTVTevatronics2 жыл бұрын
laoag city
@MidoriShiro2 жыл бұрын
Paano po nasira yan sir?
@tevzTVTevatronics2 жыл бұрын
Defective panel
@csgo8481 Жыл бұрын
hey great video, i have a similar problem with my lg 34gl750-b curved ultragear 34 can you help me? Thanks in advance
@tevzTVTevatronics Жыл бұрын
you can do as shows in the video
@ghjeffreyp Жыл бұрын
idol paayos naman kaya ba home service?
@tevzTVTevatronics Жыл бұрын
Hindi po
@gheizz1012 жыл бұрын
Paano po ayusin may clouding na kasi viewplus monitor ko 19" kalat na sa taas ng screen.
@tevzTVTevatronics2 жыл бұрын
panel issue
@JenilynFajardo2 жыл бұрын
saan po location mo kuya
@tevzTVTevatronics2 жыл бұрын
Laoag city
@JenilynFajardo2 жыл бұрын
@@tevzTVTevatronics malayo po pala kayo upload ko po damage ng monitor ko huhu baka may advice po kayo
@JenilynFajardo2 жыл бұрын
ito ung link kzbin.info/www/bejne/qIfUoohvqbB2g80 any advice po???
@JenilynFajardo2 жыл бұрын
@@tevzTVTevatronics thank you po
@tevzTVTevatronics2 жыл бұрын
@@JenilynFajardo Malamng sira na yong LCD panel. Baka may crack sa loob ng panel hindi lang halata. hindi na magawan ng paraan tulad sa video content ko. Bili nalang ng bago.
@philipchong30982 жыл бұрын
How and why remove jumpers and resistors can fix the issue???
@tevzTVTevatronics2 жыл бұрын
There is a shorted CLK line on the side where thous resistor is been removed. It can solve the problem by disconnecting the bad clk lines. Its still work because the other side has healthy clk lines.
@engr.jeckerson4920 Жыл бұрын
@@tevzTVTevatronics how about po yung screen flickering lang, hindi kana maka pag trabaho kasi panay ang flick. I check it already sa cable niya ganun padin. Same po ba ng gagawin pag binuksan ko sakin?