Villainator Mod Guide !

[@dennisbyers1784]

Would love for your mod videos to have reassembly on them. That's frequently the hardest part especially with this and more complicated blasters. Great video quality and fantastic content that is easy to follow and understand. Thanks

[@watertakken]

My villianator is all modded. It has a nerf rival Apollo spring that gest the blaster to 120 maximum FPS. Its got a doubled up catch spring. The only thing it needs is a tactical rail upgrade.

[@projectnerf7920]

Gotta send me some pics bro, would love to see it.

[@timshooter8033]

I know if you put too much spring, it can cause the cylinder to pop out....but I think you got just the right amount of umph (perfect I'd say) ....nice job Chris !!!

[@projectnerf7920]

Thank you my friend 😁

[@paullassahn4641]

Good idea for the stock extension. Might have to do this on my spectrum

[@m00k61]

My favorite HVZ blaster. Love the stock idea.

[@Drake_Nerf_Mods]

The plastic that was holding the pin snapped for me when I was hammering the pin out 😢

[@feb4862]

Solid! I've been trying to find ways to modify my villinator as a more acceptable hvz primary, thanks for the help!

[@mileslocman]

love watching your vids these are my favorite mods, old school kitbashing for the win thank you and keep up the good work Sir

[@ArTchN_Ei8ht_Industries]

Are you gonna make an addendum to show how the accuracy changed from the stock spring to the heavier spring? Would a 9/16 or 17/32 brass fit in the cylinders to make the dart fit more consistent without widening them or is the drum's cylinder walls too thin to fit those sizes of brass in them? For me, I think 17/32 are a bit too snug on darts that's why I'm thinking of going with 9/16, not 17/32, if their outer diameter will fit in the drum's cylinders without sanding the cylinders to make them wider. Thanks for confirming a spring that works and still retains the slamfire functionality of the blaster.

[@projectnerf7920]

I’ll get it out on the range, once I’ve had a chance to repair the range. The last winter storm really messed it up. But I wouldn’t expect any negative difference in accuracy at all. And you certainly could brass the drum but I would say be careful there, not a huge plunger tube or the greatest seal to the drum. Too much brass and you could actually reduce the power due to the added drag.

[@Rancid_Ninja]

last war I was at someone had one of these and with the used darts if he tipped it down they would just fall out... brassing it would fix that for sure

[@mr.jose100]

i have one where to find extra drum mags?

[@timshooter8033]

Wow...That looks sweet !

[@stuntmatt7124]

Wow, looks like a great HvZ Blaster ! Thanks.

[@virustheguardian]

I hoped this would have been attempted by now in the community but I have to ask could the barrels on the drum be brassed to bring it up to 120 or higher?

[@projectnerf7920]

I brasses one of my old ones, but it was with mixed results shot to shot. I guess the seal isn’t quite as good as I had hoped.

[@gabrielbrunser6401]

Where could I get a rival spring without having to buy a whole blaster that will then be useless when I take its spring? Or do you know of an equivalent spring that would work?

[@projectnerf7920]

You might check out if darts

[@Rancid_Ninja]

goodwill, I've gotten Apollo's for 2.99

[@gregoryeichner3055]

K 25 spring ...?

[@projectnerf7920]

Rival from an Apollo , I think

[@gregoryeichner3055]

OK well I got a box of them from out of darts we're going to try it in this and the rival saturn, also spring upgrade for the fate

[@Aidnidmsosj]

Just load in to short darts in one barrel… we got a shot gun now boys

[@projectnerf7920]

Fit is kinda loose, that said if someone was to brass the cylinder. 🤔

[@dustbustr91]

this gun needs two individual barrels rather than one huge loose one. it would be so much more accurate

[@tejasm1977]

firstttt