Villiers MK12/2 Engine

A quick tour of my Villiers MK12/2 engine.

[@TheFlyingBusman]

I have found the valves like to stick open if left unused any length of time. Nice resto. Have a mk25 HS that I’m currently getting parts together for. Missing exhaust and fuel tank my main issues.

[@martin-et9gt]

Good luck on the resto👍

[@tonyday7233]

i have one of these, had it a while, all complete, no compression, made in Ballarat Victoria Australia, it's a 12/2.

[@khilanandnishad9268]

mk12 ka full engine repairing video dalna plz

[@roberthdavies]

where did you bye the new exhaust,i need one for the same engine ,please let me know .

[@krist876]

i may have a air filter you can have if you like? ill have a dig about

[@martin-et9gt]

Thanks let me know if if any luck.

[@khilanandnishad9268]

unka piston install aur timeing milana

[@forestgump7587]

high comp motor.

[@keithrees6437]

Just bought one of these but it refuses to run without the choke being left on. As soon as you turn the choke off, the revs build up and the engine stops. Carb problem I suspect. Any ideas?

[@martin-et9gt]

Keith

[@martin-et9gt]

Keith Rees Fuel starvation check fuel filter at the petrol tap and inlet banjo on carb also main carb jet blocked.

[@keithrees6437]

Hi Martin, There is no filter at the tap and I thought that I had cleaned the filter in the banjo. I'n going to have to strip the carb again because I thought that I had clean all the components thoroughly. Let you know how I get on. Keith.

[@keithrees6437]

Hi Martin, You were right about the main jet being blocked. Although I stripped the carb completely and cleaned and blew the jets and passageways through, I hadn't realised that the main jet had a white/grey deposit inside and the blast of air hadn't moved it. Now cleared and the carb rebuilt, the engine will run, albeit quickly, after a warm up, without the choke. Thanks again for your help, Keith.

[@thomasbeasant8420]

Hi mate, Is there anyway I could contact you by phone? I've got two rotovators with mk15 engines that both don't work and wondered if you interested in repairing. Will pay. Thanks

[@maufid1611]

Is this type of engine Villiers still exist on market,if yes may I have the address and contact number.Thanks.