VIM Tools: Ratchet Tool Tuesday, Episode 57

[@josevalle92]

Mechanics cause technician can be added to any job title. While mechanic only belongs to us

[@djwambach6192]

I like the new room . That table is awesome.

[@fuzzman2000]

The lighting in the new room is off. Maybe the dark colored lumber is absorbing the light as well as casting a yellow hue on everything. The lighting in the other location is much better.

[@vimtoolsinc]

Yes, it’s unfortunate that it came out this way. We will fix it before next episode!

[@larrydudgeon2846]

So let's be a Darren and cry about it. Say it louder so the people in the back can see how much of a Darren you are. I personally think the lighting and set is awesome. Something different, that table looks amazing. I want one lol. I want the same lighting so I can get a Darren crying 😂🤣

[@shiloh5199]

Those rachet extenders are sick!! VIM tools look really good and i might have to order something just to try them out.

[@jefferyrapp8357]

I really appreciate you answering my question about the oil filter tool Please consider extending those handles it would be much appreciated. Again thanks

[@boosted2.4_sky]

3:30... I noticed right away..It's awesome... Yeah..keep that space as the VIM TOOLS KZbin video videoing space..👈

[@justinvanburen8259]

I love the table!!! And like the new room, I say use it for a while! Y’all make some awesome ratchets now I just need to make some more money to buy them!!

[@nonamegarage6721]

Would you guys ever consider coming up to Jersey and do a show with Nick @ Jersey Discount Tools..Would love to see it. Thanks for the Tool Tuesday vids.

[@nednedly3962]

The mini indexing ratchets look identical to Tone ratchets. Will yours be made in Japan? It would be great to have a US source for those.

[@JoeMalovich]

You should add regular and short fixed length handles to go with the TRK100 setup.

[@johnnygarcia2514]

I'm looking forward to the HBR810

[@daviddelpolito7067]

Mechanics !

[@brentsanders3807]

Do yall have a 3/8 HD but without the comfort grip? Like with just the metal regular handle?

[@Bhpyatte]

So, for the HBR1046, what is the possibility of having a design for the 10 mm side to have an insert to hold the 5/16 bits? Just got mine delivered today, along with the VHC77, and thought it would be nice to use all bits sizes with the HBR1046 from the VHC77 kit.

[@blakechinn5792]

Studio is cool. I daily choose vim ratchets over my snapon usually. I have choices. Vim is my tight access choice. Vim makes intelligent tools.

[@someguy2312]

I can vouch that the hbr12 inch stick is definitely very different than the competitors Ezred is always broken I literally bought mine broken Seizing up randomly at the flex head and the driver everyone I know who has one is also broken and they all got tired of getting it warrantied it never works as it should

[@randyduncan8863]

Thank you guys for answering my questions it's truly appreciated great video

[@bh10k17]

For the into ... whats up tool addicts ? Cause honesty if your watching you are. No support group needed.

[@hytekrednekbama4400]

I live in Tuscaloosa, Alabama. I couldn't care less about college games, or "Pro" games either. I will watch an Alabama game occasionally with my wife, because she really enjoys watching bama play. That said, as for myself, I tend to watch and care about the stuff that can actually effect my life, like politics, learning new skills so I can be that much more self reliant, etc....etc...

[@hytekrednekbama4400]

forgot to mention... FJB! and his puppeteers.

[@tannerivie8773]

Well looks like i need to add to my ratchet arsenal....only problems is were to start lol

[@jotu173]

QUESTIONS... I have heard here and elsewhere about VIMs heritage, but do not recall hearing much at all about it's current structure (who is in charge of what) and how many people work for the company. As a result. I often wonder while watching your videos what your official functions & titles are in the company. Are you product or marketing managers? or??? Are you the guys in charge of social media (and act as though you won the company)??? Are you the owners? Are there owners "above you"? Since (I think I remember that) it's a family business, do you work for your parents (or do they work for you), or has your company bought VIM from the original owners, or??? I can't be the only one wondering this as I watch.

[@soopersooper3291]

I like the new setting. The D shape shaft on the 3/4 telescoping handle is a nice touch. The story about the bent one gives me an idea - I love half moon wrenches, obstruction wrenches, S-wrenches - what about an HBR moon or S-wrench?

[@Owen-xw8cs]

Flex head hvac service wrench, can you please make one?

[@daviddelpolito7067]

Properly sized Steel tubing over the handles

[@AndrewRSoliz-qj3qn]

Hbr8 is awesome tool will be ordered some

[@agtech4580]

Are the on off levers on your ratchets the same as the big brand ratchets? Like Mac Snap On

[@warrenblanchard889]

Thanks for video I love my vim tools

[@toddmessina3105]

Since you asked. Bobby Bowden said this in 1992 about joining the SEC It would have been hard wading through that SEC. Too many good teams in there, boy But still. They should have gone and not Bama. There is also the matter of the 150 ish million they asked boosters for at the beginning of the season. The exact number needed to leave the ACC. It’s getting spicy!

[@260Jake]

What is the timeline for release to tool trucks on the new flex head comfort grip ratchets you showed the sneak peek of?

[@midatlantictools]

Will you be getting a 18"- plus 3/8 drive flex head HD ratchet with handle?

[@D-Marq88]

You sell mechanic tools only, so the addressing the viewer audience as mechanic’s is correct. Mechanics still can’t understand that by definition they are not technicians.

[@ThadrinC]

How long until we see flex head models? Also is there plans to make extra long models? For example the tool trucks go up to 30 inch 1/2 flex heads I believe.. anything like that?

[@hytekrednekbama4400]

everybody does not use mag rails. Many have their favorite method that works best for their situation.

[@simpsonrdlarry4385]

Put Big BOY on that telescopic 3/4” and test it, if he can’t bend it I’ll buy one!😎👍👍

[@Tabletop153]

When will the new mini indexing ratchets going to be available and what will the price be on those?

[@jeffroberts4416]

Hey guys. First of all thank you for getting the Fat Man Raceday seat. But another random question after watching this video with the 3/4 adjustable and interchangeable heads. Is there any possibility on making in a 1in drive for the industrial and Heavy Equipment Mechanics?

[@AndrewRSoliz-qj3qn]

Hang some tools on the wall room looks pretty empty

[@ResourceAdvisor-ue2pj]

Could you make some big ratchets and square drive ratchets that are dedicated devices without the removable bits? I like a dedicated breaker bar and a dedicated ratchet. The modular stuff is a nice novelty with the novelty wears off and those bits get lost

[@GregsAutomotive]

Im still using my old dads craftsman usa.im in the past.

[@johnbailey9682]

What is the part number on the 1/2 ratchet the extension one .

[@jeromequequesah3800]

Why can't I find the NR400 on the website

[@kratanicverses4805]

Why would one not want a mag rail?... Ill tell you. Some of us have invested in something like ToolGrid: and in my case, im not so worried about the cost of something that i will not use is i hate to throw away something that i do not intend to use.

[@Mrlalo96]

Do you guys have a 5/16 bit flex ratchet ?

[@johnbailey2034]

Why can’t I find the trk 100 ?

[@Ilovetools12]

Is there a 16mmx18mm flex head wrench? If so part number please

[@tylerfelix4558]

Hello, I purchased the mms450 kit and I got a duplicate socket in the set. How do I get the socket that I am missing?

[@vimtoolsinc]

Submit a warranty form on our website with a picture of the duplicate. We will get you the correct piece

[@bestblackoutvideos]

should make an rfb400k in 3/8 removable square drive 10mm ratchet wrench??? think that would be useful . and cool.?

[@jamesrahn8339]

Technician Tuesday???

[@johnbailey9682]

I know you brag about your part number ? So why is it whe I put the part number in your website says not found ? Trk100 ?

[@TheAllens315]

Looks like yall using a filter. Looks terrible.

[@johnbailey9682]

Your website really sucks . Never shows the product I’m looking for . What does that mean ? You keep talking about the 1/2 wrench extender but it’s not on your site ? Does that mean you stopped making them because it does not say out of stock this is exactly why you’re website SUCKS !

[@simpsonrdlarry4385]

Flex head 1/4 and 3/8” ratchets??