Aspen Plus for Reactor Design and Optimization Intro

[@babanzarah7488]

This is quite straightforward even for a layman. Thank you so much

[@guttanaresh4187]

Thank you so much Steve, It is very helpful, even for science background

[@davidcamilomorelosnassiest9934]

Such a video man! THANKS!

[@tubeyouwatcher21]

100 C gave me a 99.9% conversion, but I have my doubts about the validity and would have to do a deeper dive into experimental data too understand the limits of the reactions better.

[@meizaldiestu3055]

do you have a tutorial for simulating biogas production using aspen?

[@taimoorkhalid1435]

Hi Bro, did you get anything related to Biogas production using aspen plus ? If so, please can you share it with me.

[@chemicalengineersai4904]

Hi Steve..why did you choose equilibrium reactor rather than stoichiometric

[@sarahrmzni]

I need some examples about "manipulator." Can you please help me?

[@shubhamkalan6219]

Getting similar results but I have problem in produced separation and DME purification. Please post a video regarding the same.

[@kromerdude7]

Do you know how one could use the information gathered in this exercise to size a reactor?

[@sandykumar1061]

Thanks for this.

[@ramibecharalebfr]

I used to work on Aspen plus and now open search

[@stefaniteles6215]

Thank you! It is very helpful.

[@VincentStevenson]

You're welcome! Glad it helped!

[@user-cf3ce9dl7x]

It looks better to use aspen simulation work book for case study. And then we can find optimal operating condition for conversion ratio

[@mohdatifmakrani]

Thanks a lot !!

[@processengineerschannel9094]

I tested at feed temperature of 200c and same reactor temperature of 200c as well. I got 96% conversion and 98.9 selectively!! How you explain this?

[@jemuelbanares6698]

Assuming you did exactly what he did, then it might be due to a different version of Aspen he is using. Im using V8.8 and I got a slightly different value as well.

[@abirbakhtaoui288]

thank you so much

[@aytennecefli628]

If I ask, can you write what you said in the video? step by step. I did not understand some of them. i am foreign I want to apply what you say. pleaseee

[@zahrayari9164]

Just turn on cc on the video and then you'll be able to see English subtitle

[@rezatizhoosh3142]

thank you. was helpful

[@tugcedegirmenci3132]

Thank you so much

[@harunpampang2154]

could I use aspen for liquid phase?

[@karimkarim-ww5ii]

how to put ejector in aspen hysys

[@karimkarim-ww5ii]

how to put ejectpr in aspen hysys

[@Macam2macam]

super thank you man.

[@chanadug]

I was expecting some optimizations

[@hoyammustafa1891]

thank you very much , can you please check your email i have some questions