Vintage Action Man Tom Stone Repairs - Toy Polloi

  Рет қаралды 13,020

Toy Polloi

Toy Polloi

Күн бұрын

Пікірлер: 76
@toysbackzen
@toysbackzen 2 жыл бұрын
I knew this figure was going into the right hands. It was really fun watching you repair a toy that I had at one time on my possession. He looks amazing, enjoy!
@toypolloi
@toypolloi 2 жыл бұрын
Thanks again for the trade. He turned out great in the end. Cheers
@sneakyskunk1
@sneakyskunk1 2 жыл бұрын
I love watching him restring Action Men. It is the best part of the restoration process for me. Also, I swear it looks like one of those Tom Stone figures is taller then the other. I hope he keeps going with this one. It already looks great, and I am sure he can make it look even better.
@Lestat_luar
@Lestat_luar 2 жыл бұрын
Action man is one of the best toys series ever. Thank you for the video!
@toyrescuer
@toyrescuer 2 жыл бұрын
With the elastic if you take a lighter and melt the tips it will be easier and it keeps it from fraying
@kieronball8962
@kieronball8962 2 жыл бұрын
Great repairs / restoration, Dave. This vintage Tom Stone now looks amazing.
@friscoliv
@friscoliv 2 ай бұрын
Many thanks for this video. I have tried similar methods for many years to restore the muscle body figures but didn’t have the best of luck. Now I know i was at least on the right track. I probably just needed to be more patient as it could be very frustrating! Your approach is the best I’ve seen. Many involve cracking open the body and I’ve never been receptive to that.. After decades I finally find this video and its such a perfect solution to a long time problem. Many thanks!
@toypolloi
@toypolloi 2 ай бұрын
Thanks. They can be tricky to do. But you don't need to split the body apart. Just go slowly. Cheers
@andycam1
@andycam1 Жыл бұрын
I did find putting the head in warm water was best way to remove neck piece
@toypolloi
@toypolloi Жыл бұрын
It does work well. You just have to be careful with the flocking that it does loosen and lift up.
@loganjorgensen
@loganjorgensen 2 жыл бұрын
Always such an irony that the bendy rubber hands get hard and brittle with age, severe toy arthritis heh. Same here, fingers snapped right off while cleaning them. Very nice completed restoration. ;)
@kalobhunt9001
@kalobhunt9001 2 жыл бұрын
Man pls give us a collection tour one day would love to see your collection
@eltenda
@eltenda 2 жыл бұрын
Great toy line and repair
@jackfarthing3513
@jackfarthing3513 2 жыл бұрын
Great toy line
@Tim-57
@Tim-57 2 жыл бұрын
Hey Dave Thanks so much. Happy weekend
@martinseel2837
@martinseel2837 Жыл бұрын
Great job. Gives my an idea what i had to do. Got 3 Tom Stone figuers to restore. (and another 8 from the bluepants era. Lets see how far i will get. My problem is that i am still searching for coloured hands. Again....great work !
@juanjosemunozgarcia1276
@juanjosemunozgarcia1276 2 жыл бұрын
Awesome work mate
@markshellard5894
@markshellard5894 2 жыл бұрын
Action man was my favourite toy
@ActionMenWorldPeacekeepers
@ActionMenWorldPeacekeepers 2 жыл бұрын
Same here I do animation with them
@matthewh5862
@matthewh5862 2 жыл бұрын
I have a Tom Stone needing a complete reattaching. Great figure, had him as a kid.
@jasonduplock3832
@jasonduplock3832 11 ай бұрын
The key to getting 4 strands of elastic through that neck piece is to have each piece slightly longer than the last... so you are only feeding one through and then adding another single strand to the previous strand, it wastes a couple of inches of elastic but it is so much easier!
@johngeraci3887
@johngeraci3887 3 ай бұрын
Great job & review
@toypolloi
@toypolloi 3 ай бұрын
Thanks 😊
@alexandraleigh
@alexandraleigh 2 жыл бұрын
Dave a Tip from a Doll maker Fabric glue, in the end, will be a better choice most superglues will eventually discolor or flake but a Good Fabric glue like Tacky or even a Washable glue from a Drapers or fabric dept of a craft store won't discolor and can handle a quick brush up if the fabric needs a light clean I did a few beading repairs with super glue and eventually had to replace the outfit due to color fading on the glue spots. and As Always Great job on Tom!!
@antman2919
@antman2919 2 жыл бұрын
Thanks Dave, enjoyed watching that. Looks like new again.
@toypolloi
@toypolloi 2 жыл бұрын
Glad you enjoyed it
@macorourke2222
@macorourke2222 2 жыл бұрын
Great video Brother. Great Respect for Vintage Toy's. Thanks for sharing Your passion and adventures 😀 👍 ♥️ 🇬🇧🇨🇦🇺🇸🌎🎉🎉👏👏👏👏🎉🎉💯💯💯💯💯
@toypolloi
@toypolloi 2 жыл бұрын
My pleasure
@sylvanyoung
@sylvanyoung 2 жыл бұрын
Great repair . 👍🖖
@sithcarebear1
@sithcarebear1 2 жыл бұрын
Is it just me or does the Tom Stone with the original body look slightly taller than the one you had before? He turned out looking great in the end. I’m so happy you were able to get him, Dave!👊😎🔥
@toypolloi
@toypolloi 2 жыл бұрын
Could be. The bodies are very different in construction and shape. The neck is much longer on the classic body. Cheers
@brianartillery
@brianartillery 2 жыл бұрын
Great fix, Dave. I always wanted one of these figures as a kid - but you never seemed to see them anywhere. You might find a set of dental picks/probes useful in removing that rubber. I'd be afraid of bending the tips of my tweezers. Those picks are good for any job that needs a bit of precision in a tight space.
@portland-182
@portland-182 2 жыл бұрын
Another great fix! Military berets typically have a short and long side. Short on the soldiers left side, with the longer side over the soldiers right ear. You could probably persuade it into shape?
@daverage4729
@daverage4729 2 жыл бұрын
Awesome job Dave. Just a tip: whenever I'm using superglue (or paint, etc) I use surgical rubber gloves. Always handy to have a box of them handy (I buy mine from Boots).
@robertshadbolt3056
@robertshadbolt3056 Жыл бұрын
I'd recommend using a lighter on the frayed parts of the elastic. This will melt the end and make it neater, and easier to pole through gaps.
@toypolloi
@toypolloi Жыл бұрын
It depends on what the thread is made of. As this is elastic it doesn't really melt.
@deopersad2915
@deopersad2915 2 жыл бұрын
Awesome 👍🏻👍🏽😀
@sugarfree1223
@sugarfree1223 2 жыл бұрын
Great repair! If you can't find 2mm black elastic maybe use a sharpie on the white. 👍
@carlosmontenegro6835
@carlosmontenegro6835 2 жыл бұрын
I looked but couldn't find the link to the store for Action Man replacement hands. Does anyone know if they ship to the U.S.?
@Phantasia_Workshop
@Phantasia_Workshop 2 жыл бұрын
I wonder if you could dye the elastic black?
@Thehumblecollectoruk
@Thehumblecollectoruk 2 жыл бұрын
you cant beat a bit of action man
@kalobhunt9001
@kalobhunt9001 2 жыл бұрын
Wow I really didn’t think that doubled up 3mm was gonna fit through the small arm hole on the body.
@davidneal9368
@davidneal9368 8 ай бұрын
What about adding rucksack holster pistol and what about finishing touches like knife and holder and binoculars?
@Black_Patriot-Veteran-1970
@Black_Patriot-Veteran-1970 2 ай бұрын
Hey mate, you should try the GI Joe muscle body rejoint kits. They take a little more work, but are eons better than the elastic method.
@manko8852
@manko8852 2 жыл бұрын
Use a brown marker on the white elastic.
@nickthomas181
@nickthomas181 2 жыл бұрын
Tom Stone was modelled on actor John Kani who played Sgt Jessie Link in The Wild Geese . This information came from him personally.
@TheDarthMushroom
@TheDarthMushroom 2 жыл бұрын
Might it be easier if a lighter was put to the end of the elastik
@davecardoza4762
@davecardoza4762 2 жыл бұрын
Hey Dave! Great to see another restoration video. Always amazed by the awesome ideas that you create in your head when it comes to restoring vintage toys such as that action figure. I've got to ask you my friend, Can you restore the hands of the Steve Austin SMDM action figure the same way that you did on this video or there's more difficulty in the process? My Steve action figure has his hands all crewed up & I purchased a new set of arms to restore it, but I just wanted to know if it could be possible to change only the hands without having to change the whole arms. Cheers my friend.
@toypolloi
@toypolloi 2 жыл бұрын
Thanks. I have not tried fixing SMDM hands as I always seem to have spare arms. I don't think they would be that easy to replace as the hands are made of a hard plastic and the fixing to the arm is not designed to be removed. Cheers
@sizoromero2269
@sizoromero2269 2 жыл бұрын
Another great video as ever Dave. Would this repair process be the same for a blue pants dynamic body action man?
@toypolloi
@toypolloi 2 жыл бұрын
Thanks. Should be as they have the same construction if I remember correctly.
@TheAstrojoe62
@TheAstrojoe62 5 ай бұрын
I'm looking for a way to make a reproduction of the beret. Does anyone have a pattern?
@toypolloi
@toypolloi 5 ай бұрын
I think it is just a circle of fabric with some elastic sewn around the edge. Would be simple to do. Not sure I have the sewing skills for elastic just yet.
@TheAstrojoe62
@TheAstrojoe62 5 ай бұрын
@@toypolloi I hear ya but I'll give it a try. What kind of fabric were those made of? It looks like felt. I'm in the States and have never seen anything but photos. I've been working on a reproduction box to finish off my custom. Used the muscle body Cotswold has been selling.
@leeharvey8544
@leeharvey8544 2 жыл бұрын
Another really enjoyable restoration, thanks. Did you come across any deterioration of the head plastic? Like the blue mould that other vintage Action Man head-sculpts suffer from? Just wondered if you know what causes the blue marks? Can anything be done to prevent them getting worse?Thanks.
@toypolloi
@toypolloi 2 жыл бұрын
Thanks. No issues with this head apart from a few areas of flock missing. The blue on other heads is most likely the plastic degrading. Unless it's pen marks.
@leeharvey8544
@leeharvey8544 2 жыл бұрын
@@toypolloi thanks so much for the answer - I really appreciate the way you take time to answer questions in the comments section. Thank you. 🙏💫
@ActionMenWorldPeacekeepers
@ActionMenWorldPeacekeepers 2 жыл бұрын
I like your accent that's what drives me to your videos because your accent is like awesome it makes you want to listen to everything that you're doing you know I mean it's awesome man
@toypolloi
@toypolloi 2 жыл бұрын
Thanks! That's very kind of you.
@paulclow3398
@paulclow3398 2 жыл бұрын
Hi dave great video as always that Tom Stone figure looked awesome. I have a mego question tho, one of my pota figures has a broken/missing thumb, I've got a replacement hand and wanted to know if the hands can be "pulled" out at the wrist like an action man or do I have to do something else?
@toypolloi
@toypolloi 2 жыл бұрын
Thanks. On the mego figures, push the pin out that holds the hand on, put the new hand on and push the pin back in. It's a really simple process on those figures.
@paulclow3398
@paulclow3398 2 жыл бұрын
Thanks dave
@MarvelDcImage
@MarvelDcImage 2 жыл бұрын
I bet a Lego traffic cone can be modified to look like the neck cone if that part is missing.
@MeanJohnDean
@MeanJohnDean 2 жыл бұрын
We don't have Tom Stone in the states that I know of.
@toypolloi
@toypolloi 2 жыл бұрын
He was released in the US first I believe.
@MeanJohnDean
@MeanJohnDean 2 жыл бұрын
I napped today so I'm guessing I'll be good for tonight. Though I am tired. We'll see.
@toypolloi
@toypolloi 2 жыл бұрын
Was my video that soothing?
@natesquestyouknowthatsrigh8269
@natesquestyouknowthatsrigh8269 2 жыл бұрын
👍🏽
@davidneal9368
@davidneal9368 8 ай бұрын
Brickle cheap plastic. Pallitoy Action man were built to last and take beating. In saying that I would still like to get hold of this figure hopefully boxed. I'm only just starting collecting. Thing is it's like an addiction. Once you bought 1 or 2 figures you want to go out the next day to pickup other ones
@ActionMenWorldPeacekeepers
@ActionMenWorldPeacekeepers 2 жыл бұрын
I am still waiting for Cotswolds to get them body back in they take forever smh
@arghjayem
@arghjayem 2 жыл бұрын
Tom Stone…..what if 1970’s Michael Jackson enlisted in the army instead of continuing with his singing career….🤔😂🤣
@MrDrokkul
@MrDrokkul 2 жыл бұрын
You would more than likely have to order it online, but that elastic cord can be gotten in brown colors as well. I know the clothes are going to cover the joints, but just as a mention in case there are any "stickler" repair-ists out there
@squirrelkilla7371
@squirrelkilla7371 2 жыл бұрын
He's a dude, playing a dude, disguised as another dude
@wesmadebuilds681
@wesmadebuilds681 2 жыл бұрын
If you don’t glue your finger to something you aren’t really doing it right. I spend a lot of time picking CA glue off my fingers.
@toypolloi
@toypolloi 2 жыл бұрын
So do I. It's part of the fun 🤣
@irvinelawrence2733
@irvinelawrence2733 2 жыл бұрын
Next time just dye the elastic to your required tone
Vintage Action Man Searchlight repair - Toy Polloi
22:21
Toy Polloi
Рет қаралды 9 М.
Vintage Action Man Atomic Field Radio repairs - Toy Polloi
19:41
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
Vintage MOTU Laser Bolt repairs + stickers - Toy Polloi
17:33
Toy Polloi
Рет қаралды 9 М.
Vintage G.I.Joe Bullet Man repair - Toy Polloi
24:04
Toy Polloi
Рет қаралды 10 М.
Vintage Action Force - Z Force restoration - Toy Polloi
25:35
Toy Polloi
Рет қаралды 7 М.
Vintage Tommy Gunn Zodiac Toys restoration - Toy Polloi
28:45
Toy Polloi
Рет қаралды 13 М.
Vintage Action Man Helicopter restoration: part one - Toy Polloi
26:35
Wiki Weekdays | The Only Thing Action Man Can't Do Is Rest
16:01
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН