Vintage Belt Sander Restoration

I bought a vintage belt sander from a used tool store. Through my research, I discovered it was manufactured by Makita, model 9400, in Japan. When I found it, the shaft was seized and it was quite rusty. In this video, I will restore its functionality. I hope everyone enjoys the video
* Belt Sander Information *
- Brand: Makita
- Model: 9400
- VOLTS: 100-110V
- Power : 880W
- Curent : 8A
- Frequency: 50/60 Hz
- Belt Size: 100 x 610 mm (4 x 24")
- Belt Speed: 400 m/min
- Net Weight : 8kg
I'm very happy to receive your feedback, advice, suggestions to improve myself.
-------------------------
Like and subscribe to support the channel ^^
Thank you so much for watching !!
Have a nice day ^^
#restoration #restorationvideos #restore #repairwork #beltsander
-------------------------
Content
0:34- Intro
10:36- Disassembly
21:36- Restore and clean
32:43 - Complete and check operation

[@robertkovacic4623]

For €30 I bought a very old belt sander Makita 9924DB...it is in excellent condition and works...just a little dirty, rust etc...I already have all the bearings etc...I will also restore it😃 Good video...keep it up.👍

[@hbrestoration]

Hope you can bring it back ^^

[@ModelsExInferis]

Another great restoration! I love it that you just get on and fix things, no fuss, no drama, just broken to working. I look forward to the next one!

[@hbrestoration]

Thank you very much ❤️❤️❤️ have a nice day

[@kpoper_multilover2653]

A melhor lixadeira do mundo, eu tinha uma dessas, só na fera da marreta da pra, achar uma dessas ainda.

[@hbrestoration]

but it's too heavy 🥲

[@GeorgeWMays]

Consider the Zen of sanding the sander....

[@hbrestoration]

zen??? I do not understand

[@hbrestoration]

I hope you will enjoy the video 🥰

[@user-hl3yz2zf2m]

استمتعتُ بعملك الجميل.. من لحظة بداية الفيديو وأنا أتساءل: ما هذه الآلة، وما عملها؟ وجاء الجواب واضحًا في الثواني الأخيرة.. شكرًا لك على هذه المتعة..

[@hbrestoration]

many thank, have a nice day ^^

[@RonaldoSilva-tn8in]

Restaurada lixadeira de cinta 😉

[@hbrestoration]

Thank you very much ^^ Have a nice day

[@paulmcmain1760]

Very nice restoration

[@hbrestoration]

🥰🥰🥰 many thank

[@armandoarturorosabalsanche7173]

Well done my friend, from, Bayamo, Cuba

[@hbrestoration]

Thank you Cuban friend❤️

[@brentdallyn8459]

Wait!, the sander was jittering so much because he wired it wrong, it was running backwards...watch which way the belt turns lol

[@hbrestoration]

😅Yepp you are very observant, I had to reverse the wires

[@marcom2248]

Very well done my friend!👍

[@hbrestoration]

❤️❤️ Thank my friend 🥰

[@drstrangefart]

Good work on that one, it's always gratifying to see old power tools brought back.

[@hbrestoration]

many thank ❤️❤️❤️ have a nice day

[@prod_change_up]

And then put to use!

[@resurrectiongarage1506]

I think I would have polished the body of it but personal preference, looks great.

[@hbrestoration]

Thank you I will try to do better next time

[@resurrectiongarage1506]

@@hbrestoration nothing wrong with it, it turned out great, i just like polished aluminum

[@danceswithaardvarks3284]

I was thinking it would look good polished, but then remembered restoring an ELU MHB 90, After fully polishing the case (took ages0 the motor let out the blue smoke, so now it's on a shelf and may get a rewind some day.

[@andrewgrace4410]

Nice restoration 😊

[@hbrestoration]

Many thank ^^ have a nice day

[@jt9498]

Excellent restoration, but not everything needs to be painted....like the 2 rollers and flat plates.

[@hbrestoration]

Yepp, I was also wondering if I should paint it

[@garymucher4082]

Nice refurbishing job. I felt bad for you when you broke off the corner when removing the screw that was holding on the plate. But you welded it back drilled and taped it and made it work. All in all, it came out nice. A great color for the sander body would have been a hammer stone silver grey. But it still looks good how you painted it. Thumbs Up!

[@hbrestoration]

Many thank ^^ have a nice day

[@jasoncdebussy]

"Tapped" not "taped" 👍😊

[@hbrestoration]

@@jasoncdebussy

[@jasoncdebussy]

​@@hbrestorationI have no idea what those emojis are meant to convey 🤔

[@hbrestoration]

@@jasoncdebussy nothing, just kidding. I want to write something but don't know what to write😅

[@alexandres8846]

good job and. using torch whit wd40 for the tight bolts.

[@hbrestoration]

I used wd 40, but no luck

[@seekimheng8929]

Great job 👏👍👌❤️

[@hbrestoration]

❤️❤️❤️❤️ many thank

[@georgebrown8312]

Beautiful restoration job you did restoring that belt sander. It looks much better and it works like a charm too. Just like new. Excellent work.

[@hbrestoration]

Thank you very much ^^ have a nice day

[@user-lv8yw2hr9h]

THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@hbrestoration]

Many thank🥰🥰🥰🥰

[@danceswithaardvarks3284]

Great video and authoritative teardown and rebuild. I restored two of these. One is a Makita and the other branded Wolf (made by Makita). I use one for sanding and one for pulling out vehicles stuck in mud. Joking of course, but they are a beast of a sander. Not sure why yours was bouncing around so much, which it shouldn't. Maybe a belt bump issue?

[@hbrestoration]

because my sandpaper has a burr

[@anthonyvincent5892]

Push in a bearing by the outer race not the inner race.

[@hbrestoration]

Pressing on the shaft will apply force to the inner ring

[@user-gt3ew5tk7h]

Спасибо класс.

[@hbrestoration]

❤️❤️❤️ many thank

[@CharlesCantilena-mw5fg]

I don’t know how 😊they can disassemble and put it back together without an assembly book!

[@hbrestoration]

Complex machines may have to use it😅

[@brentdallyn8459]

he can't, he rewired it wrong, the belt was going in reverse! check it close, you can see it rofl

[@adnanmurat3171]

Superb

[@hbrestoration]

❤️❤️❤️

[@vicentebarajas2311]

Doesn't sandblasting hurt your hands?

[@hbrestoration]

I don't spray it on my hands, it's very dangerous to do that. Warning, don't do the same as me

[@rosellabill]

I just read the specs on the sander and the thing that really caught my eye was the weight 8 KG's. WOW Some mauls or sledge hammers wern't that heavy. Do you know the year Sir?? Great job and have a nice one. I am only at minute 9 but you always do a fantastic job. Please have a decent Week.

[@hbrestoration]

it's quite heavy for me, I tried and couldn't find its year of manufacture

[@rosellabill]

@@hbrestoration Thank you for that. And nice work. Looks great

[@brentdallyn8459]

what caught my eye, that the belt was moving in reverse...he wired it wrong, check it

[@gauloisrefractaire3492]

Exactement la même conception que nos bidules en plastique actuels 😢

[@hbrestoration]

It's much heavier, it's tiring to hold 🥹

[@-Gzegosh-]

8:57 - хотел починить - доломал...

[@hbrestoration]

🥲

[@Unboxing.Channel]

😍😍😍😍👌👌

[@hbrestoration]

❤️❤️❤️❤️

[@adrienlanglois4963]

ou avez-vous acheté vos bandes de papiers sablés de 27 pouces. car jj'ai vintage de 1950

[@hbrestoration]

Is there any e-commerce site where you live or you can search on google, there are many, size 610mm

[@user-to3mx8pt2y]

😢😢😢

[@hbrestoration]

🥺

[@robertobezerra8376]

👏👏👏👏👏👏💯💯💯💯👍👌🇧🇷🇧🇷

[@hbrestoration]

❤️❤️❤️🥰🥰🥰

[@neilhaas]

❤🎉🎉⭐⭐🎀🎀

[@hbrestoration]

😘😍❤️

[@neilhaas]

🤩☺️😁😀😇🤗👍🤓😎💯😊

[@hbrestoration]

🥰❤️🥰🥲🥰❤️

[@rogerpatrongonzalez5800]

👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍

[@hbrestoration]

❤️❤️❤️🥰🥰🥰

[@nelchan2421]

second

[@hbrestoration]

Thank^^

[@user-dn2hj4be5w]

После того как этот "мастер" отломил кусок от алюминиевого корпуса я выключил видео. Это ужас.

[@hbrestoration]

Should I cut it off and act like nothing happened?

[@namescout5652]

First

[@hbrestoration]

❤❤❤

[@troyna77]

fake

[@hbrestoration]

🥲