Vintage Electric Hammer Drill Restoration and Conversion from 100V to 18V

[@nsbhagwat]

Gear Show rewinding the armature, thats more like it. Loved it.

[@gear_show]

I'm glad you love it, thank you!

[@mcrwy]

​@@gear_show But when the engine is modified, it becomes weaker than it was, so it is preferable not to modify it and make it as it was. There are many repairmen who do not do this for this reason

[@MetalRestorationBho]

This was excellent. You really went all out. Love the result. 🥰🥰🥰

[@gear_show]

Thank you so much 🤗

[@jonxchannel]

NICE BATTERY KIT I LIKE IT A LOT

[@gear_show]

Thank you!

[@Kamidashi77]

14:30. When I saw these armature rings, I immediately remembered how we used to throw shaped transformer plates in childhood. They were in the form of the Russian letter "Ш", or "E". 😄

[@gear_show]

Oh, you have a good childhood memories. Thank you for sharing!

[@Kamidashi77]

@@gear_show Thank you for amazing work and video montage! 🙂

[@beaverone3837]

The proper use for a 50mm socket 😂

[@Gorphee]

It looks like the spot labeled '12v' on the circuit board wasn't soldered down like the rest. You can see it at 3:47

[@Pushpin06]

also didnt add a grommet where the power cables go into the (metal) body

[@russelblackwell6041]

always one to pick a fault

[@juanpena9386]

People who spot potential problems are much better at their job than those that just sit in awe.

[@yeagerxp]

Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦

[@gear_show]

My pleasure, thank you!

[@ЕвгенийШмыга]

I`m one of your biggest fans! Every video is a masterpiece. Really grateful you`ve inspired me to do a lot of my own projects.

[@gear_show]

Thank you for away come to this channel! I'm glad you like those contents.

[@plageran]

wish i had the patience

[@hrishikeshjoshi8074]

I was feeling restless for some reasons this restoration video calm me down

[@taufiksaputra7958]

どうもありがとうございました、私はあなたのコンテンツにとても満足しています。

[@gear_show]

どういたしまして！ あなたがこのコンテンツを生きてくれてとてもうれしいです。

[@pindrixsechon6311]

A masterpiece, in a masterclass, by the master ! Hey dude, you rock !!!!

[@7mdaemam97]

نبويو ت

[@gear_show]

Thank you! I'm glad you like it.

[@husseinali-km3ug]

Good work, I think adding the left and right direction key is necessary for this work

[@alikasem8058]

Wow that amazing job and you have a great experience too

[@gear_show]

Thank you!

[@FranciscoRoura]

I love this, the voltage convertion was a master piece, It would be nicer a more elaborated adaptation to the battery and a cover for the exposed wires, consider 3d printing 👌

[@gear_show]

Okay, thank you for sharing! I'm glad you love this content.

[@dumalaanjaneyulu4696]

You are genius to make these kind of things sir❤️❤️❤️

[@gear_show]

Thank you so much!

[@pareshgajjar6601]

Excellent work with useful tools and techniques.

[@СергейЖилинский-щ7г]

Да. Хорошая и серьёзная проделана работа. Удачи вам. Ну и конечно лайк

[@SC.243k]

Awesome… very beautiful 👌 Fully watched 👍👍👍👍👍

[@gear_show]

Thank you so much 😊

[@larrykelly2838]

I really enjoy your conversions.

[@gear_show]

Glad you like them!

[@lopa2000]

Another great video and i like the sound! 👍

[@PhG1961]

Great craftsmenship !

[@gear_show]

Thank you!

[@thomastechnical2075]

Thanks for change Table sheet Gear show Very Excellent work Brother

[@gear_show]

My pleasure, I'm glad you like it.

[@nathkrupa3463]

What a wonderful restoration and you are very hard worker thanks for the sharing this video and nice restoration good work sir 👍👍.

[@George_Borman]

Лови плюс! Я бы оставил 220. Эта серебристая краска быстро сотрётся. Инструмент сделан на века !

[@gear_show]

Спасибо, что поделились!

[@uccuong9309]

Oh man! I love your videos

[@garyjones2582]

Very impressive G.S... Nice video...

[@gear_show]

Thank you!

[@Hybriddiag]

nice build

[@gear_show]

Thanks

[@re-fix9678]

very good👍👍

[@gear_show]

Thank you!

[@antrepenor]

Nice, looks SF, like a fallout experimental weapon :)

[@gear_show]

Yes, thank you!

[@andreasmoll_0924]

Please a Quick-release chuck and a brushless motor

[@billykulim5202]

so scary powertools with full metal expose like that with no rubber coating, and its electric AC to, you bassicaly play with your life using a tools like this, convert it to dc will be safer from electric shock

[@Йохан-м7т]

Щетки у моторчика нужно было поменять на медно-графитовые, с низким сопротивлением, которые расчитаны на большой ток. Спасибо за контент!

[@gear_show]

Хорошо, спасибо за советы!

[@DamianosJDM]

U forgot to solder the 12v signal on the battery module at 3:25 . Nice videos!

[@gear_show]

Yes, thank you for the feedback!

[@EDUARDOGONZALEZ-lq7zb]

THANKS GREAT JOB

[@gear_show]

You're welcome, thank you!

[@vichetdragoncars3186]

I’m your fan. Excellent job

[@gear_show]

Thank you my fan :)

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented

[@gear_show]

I appreciate that!

[@MeilyFoodie]

❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️ Amazing video ❤️

[@gear_show]

You are so kind ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

[@mostafaallam2552]

very good

[@gear_show]

Thanks

[@boueng]

Nice job, good content! 👍🏻Thanks! 🌹

[@gear_show]

Thank you very much!

[@arturlend2297]

Świetna robota 👏👍😎

[@andrewjarvis5814]

cool project but idk if its too fit for masonry. hammer drills can do it but its slow compared to a sds rotary hammer

[@gear_show]

Because the old mechanic structure.

[@juancarlosruizlopez6764]

Me encanta tu trabajo y conocimiento.....siempre estoy pendiente de tu videos.....gracias

[@gear_show]

Me alegra que te guste este contenido.

[@ahmetemindeveli8521]

Türkiye den selamlar 🇹🇷🇹🇷

[@ramonesteban5473]

Fantástico trabajo ! Gracias por compartir.

[@gear_show]

¡Denada gracias!

[@leandrosilvaleallima1991]

Parabéns pelo vídeo. Faz um vídeo explicando com Faz a ligação da bateria 🔋

[@dendyfebianto4157]

good job... 👍👍👍

[@gear_show]

Thanks

[@hsinus666]

Great job as usual but the motor seems to be not powerful enough for this drill?

[@gear_show]

Yes, it is less power than original.

[@algeriemonpays5828]

really beautiful great job thank you

[@gear_show]

Thank you! 😊

[@janu5797]

The japan script says it's makita, i guess that's the brand

[@gear_show]

Okay, thank you for sharing

[@TheGodsrighthandman]

Other than perhaps a bit better cable management from the handle to the battery, you've done an excellent job. I'd have sleeved the wires into one flex, grommeted the hole they emerge from or, indeed, routed them out of the smaller hole @ 28:38 and blanked off the large aperture at the bottom. Still, definitely a 9.5/10.

[@gear_show]

I'm so glade with your feedback, thank you for sharing!

[@seagullag]

Beautiful job.

[@gear_show]

Thank you so much 😀

[@brifpot]

allways good thanks

[@gear_show]

Always welcome

[@AnsonBelvin]

The motor laminations will produce eddy currents because each lamination wasn't isolated electrically with varnish etc. But overall great work!

[@RestorationAustralia]

Well done. 👍

[@gear_show]

Thank you! 👍

[@محمدالبغدادي-ح9ط]

أحسنت يا مبدع استمر

[@gear_show]

شكرًا لك! أنا سعيد لأنك أحببته.

[@valmirramos4195]

Trabalho de mestre! Gratidão Gear Show!

[@gear_show]

Muito obrigado!

[@muhammadrais4889]

Nice job 👍🇮🇩🙏

[@luisbarrioszavaleta9779]

excelentes videos compa bendiciones , sigue asi dando videos chingones , saludo desde martines de la torre ; veracruz , mexico.

[@pauloteodoro2415]

Olá, dar pra modificar a bobina de campo também, pra não colocar imãs?

[@smmcreative]

It was really great

[@gear_show]

Thank you!

[@BlackKnight-ch4en]

How will you stop the drill for draining the battery cells all the way?

[@boueng]

What is the name of the company that made this drill?

[@هشامالعدل-ت6ل]

نسأل الله العظيم ان ينصر اخواننا في فلسطين

[@vinodpatil495]

Nice 😊

[@gear_show]

Thanks

[@أبوحكيمالنجار-ص4ص]

That's a very nice

[@gear_show]

Thank you!

[@ArifKamaruzaman]

You're supposed to melt that plastic pole. The one that came through nickle plate. It's there to lock the metal in place. I used low temperature solder with old tips.

[@gear_show]

Okay, thank for the tips

[@Nick.Tran7777]

Nice !

[@edyeduard4368]

Thats a lot of work. I have a drill very similar i found it in a dumpster i dont that i will power it from the mains i think it s dangerous beacause of the metal body maybe i wil something steampunk from it... i have one guestion what that that one cluch do?

[@gear_show]

Becarefull with all aluminum tool.

[@tioja92]

Wow! Your job is amazing.... I need to know... how did you remove the rust and the grease?! that must be difficult

[@blastingweevil2968]

nice but you should not use plastic to "Insulate" the windings.. you should use insulating paper that is designed for it you run the risk of it heating up and melting and sticking causing a short with prolonged use.

[@gear_show]

Yes, you're right. Thank you so much for sharing!

[@vicdun12.21]

Винтажный киберпанк)))

[@gear_show]

Да спасибо!

[@magnoluciodomingos1331]

Bravo 🤠🏆🇧🇷🇧🇷👏✍️

[@gear_show]

Thanks

[@mrt5393]

What was the blue component marked as z08, a bridge rectifier ?

[@gear_show]

Which part of the video? Could you please point it

[@androidmandroid7647]

Crazy!!

[@octavianraducanu4048]

Îmi place foarte mult.

[@jgprojects912]

Use dc switch or 30a relay with normal switch Switch u are using will not handle >2 amps current because it is made only for AC current load

[@gear_show]

Okay, thank you for sharing!

[@girthquake1413]

Have you ever done the math to see how much more powerful your mods have made tools like this one?

[@gear_show]

When I was studying physics, I knew how to calculate its force.

[@andisme]

Q: Do you have to tamper with the motor in order for it to work with a battery, I have added a battery to my corded Strimmer to make it cordless, however, it doesn't give the same power?

[@gear_show]

Did you change the motor?

[@andisme]

@@gear_show no i have not

[@andisme]

So i take it motor requires changing for it to work?

[@Flyonwaterslow]

Very nice ! ...but one question... How you calculate number of spire?

[@gear_show]

I follow DC armature 18V

[@Saber_Matrix]

Dope💯

[@gear_show]

Really..

[@Saber_Matrix]

@@gear_show What do you mean by "Really.." ?

[@Nonro12]

Все очень круто, но не тонкие ли провода питания от аккумулятора к дрели? Потери в них будут(((

[@tidleso5637]

Some math to why you take the winding you do would be very helpful to redo this oneself. Otherwise great video!

[@plageran]

does the additional turns give you more torque or higher voltage range?

[@tassottia]

hero!

[@gear_show]

:D

[@kesz40]

Good job Where can I buy the battery case. the link I can't find yours in the description link does not work

[@X11R7]

Thank you for great video bro. 21:20 I need your help. I use RS 775 and its wires broken high voltages. What did use this liquid glue for secure wires? I find a glue, Permabond 920 but is it very expensive.

[@gear_show]

It is A&B glue.

[@Homeworkshop_Evgeniy]

А сразу нельзя взять готовый аккумулятор??

[@gear_show]

Это искусство создания видео.

[@omidkarimi-fr3fx]

ممنون وخداوند خیرتون بده

[@ruyani8511]

👍👍👍 mantap

[@gear_show]

Thanks

[@klimchugunkin8244]

жидкое крепление аккумулятора!! Можно было в алюминиевом корпусе сделать

[@Asadkhan-kn7er]

Sir can I upgrade 12v battery to 16v for my china makita drill if any problem or not.

[@phuocnguyen-mw5bq]

Có mô tơ 18v đc sao anh ko thây, mà quấn như vậy thì làm khó em quá.hehe theo dõi anh đã lâu

[@repair_and_restoration]

Mo to 18v loại mạnh nhất là 895 cug ko mạnh bằng mo to quấn lại này nên họ quấn vẫn hơn .

[@ArdianF4]

Interesting project. But was it worth? I mean, there is really lot of work you did. Anyway when you testing drill on different materials like wood there is no question. When you drill concrete, I see a low performance in this case. And there is not showing drilling metal plates. Good job anyway. Good luck!

[@gear_show]

The battery can be used with the original power tool, so It can't count into this project cost. I do this project for learning and showing. The vintage mechanic structure is designed not so good, that why it performs not so well. Anyway thank you!

[@valera050883]

👍👏 отлично

[@cabinvibeetsystore9094]

New sub , liked ❤️👍👍🙏✌️

[@gear_show]

Thanks for the sub

[@蔡阿興-x3e]

nice

[@krishnabhakti108i]

i thought you are going to use a SDS chuck

[@Alex300zxTT]

How come never post product links? Where can I get those battery cells?

[@sammyd7996]

I like to disassemble things as well but I never put them back since I don't remember what part goes where 🤣🤣

[@gear_show]

After you watch my videos, you will can do it

[@mahesasanggadipa]

can you restoration for electric die grinder? or mod it into battery

[@gear_show]

I'm not promise, but I noted what you want. Thank you!

[@AbbyChau]

Did you input 100V in the beginning? What is the current or power of the new motor?

[@gear_show]

I didn't test with 100V in the beginning, I know the original power by the label. My multimeter can't measure the current of the new motor.

[@AbbyChau]

@@gear_show the drill is designed with 100V so maybe your initial test with 200V+ AC broke it? these vintage makita hammer drills are surprisingly durable and ppl are still using them practically today.