VW Beetle - Super Beetle Sound Deadener - Floor Pan Protection - Cheap & Easy! DIY! Part #1

How to install vw beetle sound deadener on a budget!!
Donations to help support the video content, please click here:
www.paypal.com/donate/?hosted...
Check out the Members...Tshirts, And Apparel! Thank you!
www.bonfire.com/store/sladesb...
For A Members Quality Sticker: You don’t have to do anything special to be a member, just be subscribed to the channel & grab your members sticker! 👍🤗 They are high quality vinyl. If you want your sticker they are $4.00 free shipping in the USA ( outside the USA $5.50 free shipping) you can go to:
sladesvwbeetle.com/sticker/
My Website:
sladesvwbeetle.com
Friends Website:
www.superbeetles.com
www.allaircooled.com/
#vwbeetle #vwbug #aircooled #sladesbeetle #beetlerestoration #vwclassicbeetle #classiccar #vintagecar #restoration #vwlivechat #vwwillitrun #vwbeetlebarnfind #vwbus #vwstrokermotor #vwsalvageyard #vwhowtovideos #vwdiyvideos #howtoremoverust
Bad Ideas - Silent Film Dark by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

[@user-fl5we5vc5v]

and i have stared working on my v w beetle very good teacher 😊

[@user-fl5we5vc5v]

hi you are doing very good work iam learning from you day buy day thanks fot the all the ideas and the information iam from sweden 😊

[@douglasbarnhart3324]

Nice video thank's for your time looking forward to the next one.

[@SladesVWBeetle]

Thank you Doug, thanks for being here all the time my friend. I truly hope you have a wonderful Thanksgiving.

[@boothpepper1492]

Thanks I look forward to everything you are doing sound deadening, foam removal as I am currently doing a 70 bug your project is coming along quickly hopefully mine will too, esp with your great videos and explainationis.Thanks Pepper road speed shop.

[@gustavotellez1036]

Stuck gold with your channel, thanks a lot man big help 🤘🏽

[@SladesVWBeetle]

Thank you so much for the kind comment.

[@pstreetgarage7304]

Great job. Stuff seems nice to work with. And yes for the foam area

[@SladesVWBeetle]

Thanks my friend, I’ll be doing that video in a couple of weeks.

[@TimsWorkshopTJY]

Hi Slade, You do great work on restoring these vehicals to live again

[@SladesVWBeetle]

Thank you so much Tim I truly appreciate that.

[@lbach6471]

Absolutely would love to see that. I hope it’s soon because I was just about to spray new foam into that area. I never thought about it holding moisture.

[@SladesVWBeetle]

Oh no, you don’t wanna spray new foam in there!!! I will do that video very soon. Foam holds moisture. I will definitely show the remedy. Just give me a couple of weeks.

[@frankdobry4514]

I got my first beetle and I like how u completely explain things and yes I subscribed

[@SladesVWBeetle]

Thank you sir!! Welcome aboard and congrats!!

[@bogodfrey8649]

I like your videos and will defiantly do the sound deadening. And sure would like to see the foam removal. Thank you for sharing the tips. Always appreciated. I'm restoring a 64 Bug for my wife as the 64 Beetle was her first car when she was 16, over 50 years ago.

[@SladesVWBeetle]

Thank you for being here! Wow that is so cool, she will really like that when it is done. I still have to sound deaden the rest of the car inside. So I’ll do that part and show what all I do on the sides and back. That will be in a couple of weeks probably. Welcome to the community here!

[@mikemoreno2444]

yes would like to see the foam video thx for all the step by steps

[@SladesVWBeetle]

Thank you Mike! And I will definitely be doing the video in a couple of weeks.

[@thebadbug7026]

Dual cameras is working out great. Having that extra vantage point when you are working really helps to show what you are doing! I like it!! I would like to see the foam removal too. I did not know anything was packed back in that area.

[@SladesVWBeetle]

Thanks!! It’s hard without being filmed by someone else, so the second camera has been handy!

[@billdowney6891]

Yes please, show it al!

[@diegooceguera7256]

Love the videos man. Really helping me out with my beetle. Was looking far back and couldnt find one but when you get the chance maybe do a diy alignment!

[@SladesVWBeetle]

Thank you, I appreciate you being part of the community here. I will be doing a front end alignment on the 68 soon as I get it together. The last one that I did on my super beetle must’ve come out perfect the tires are wearing nice and even

[@richdrenga7384]

another great video, thanks as always for doing this....yes, please, I am looking at that area on one of my restos and have been scratching my head as to what to do. So, I vote yes!

[@SladesVWBeetle]

Thank you very much Rick, I will be doing a video in the next few weeks. I hope that you have a wonderful Thanksgiving.

[@richdrenga7384]

@@SladesVWBeetle you as well!

[@acdcfan5672]

Project is looking awesome!! And sure would like to see the foam removal. Thank you for sharing the tips. Always appreciated. Have a great day brother and best wishes for you and Heather

[@SladesVWBeetle]

Thanks my friend I appreciate that. I’ll be doing the video in the next couple of weeks. I hope you have a wonderful and happy Thanksgiving.

[@acdcfan5672]

@@SladesVWBeetle Happy Thanksgiving 🦃

[@haskyb9184]

Keen to see the foam removal from the rear quarters, mate. Enjoying the uploads as always 👍🏻

[@SladesVWBeetle]

Thank you Ben! And thanks for taking the time to leave a comment.

[@oldtanker4860]

@@SladesVWBeetle I'm interested too.

[@randypannell2509]

Enjoyed the video

[@SladesVWBeetle]

Thank you Randy!!

[@KenBulldog]

I’m going to watch the rest of this another time, your video’s are awesome… i talked… and i forgot….😆😆😆 my life story

[@SladesVWBeetle]

Thank you ken thanks for taking the time to leave a comment.

[@lisab4842]

I bought my quick roof just waiting for the atmospheric river to end. Luckily we are not directly effected by the flooding but the rain is unprecedented! Yes I would like to see a video about ridding our beetles of the dreaded foam. Thanks again for the great vids

[@SladesVWBeetle]

Thank you Lisa! I truly appreciate the kind comment. I think we have some rain coming in very shortly. Of course it’s really cold I live Northeast.

[@GoneFishing62]

Great Vid .Yes definitely interested in knowing how to remove foam from behind the quarter windows. Brisbane 🇦🇺

[@SladesVWBeetle]

Thank you very much I appreciate that, and I will be doing that video in 2 to 3 weeks.

[@coreypint8358]

Yes do a video on getting the foam out. I have a 72 super beetle that is starting to rust.

[@SladesVWBeetle]

I will definitely be doing that, 2 to 3 weeks I will have the video.

[@danielneuenschwander7381]

Great Video Sir Slade! Out here in AZ, the brand name Quick Roof is limited, but there is a product with identical packaging & verbiage called Peel & Seal, pretty well the same thing from what i can tell. Keep up the great work!

[@SladesVWBeetle]

Yes!!! I’m pretty sure it’s the same thing, and will work the same way. My last car was from Arizona, I could not believe how solid it was. I’m Northeast so usually our cars need completely restored.

[@antoniorivera6187]

Very nice job sir I’m Injoying watching your videos and the knowledge you share 👍🏻👍🏻👍🏻👍🏻 yes I would like to see the form removal videos also take care and stay safe 🙏

[@SladesVWBeetle]

Thank you so much Antonio, I truly appreciate you taking out the time to comment.

[@leonardramsey3458]

I'd most definitely would like for you to show us the foam replacement/substitute. Thanks for sharing these DIY Beetle Videos 📸💪🏼😎👍🏻❤️

[@SladesVWBeetle]

Thank you Leonard, I will be doing that in the next coming weeks. I hope your Thanksgiving goes well.

[@philipperoy1759]

Yes please do the foam removal video! Would be very helpful for me and my SB!

[@SladesVWBeetle]

It is a little different on my 68 where I didn’t have that issue. However as promised I will do it. I’m going to take a trip down to that salvage yard whenever the weather warms up a little. I’m going to pick a Beetle there and do it!

[@Doubleodude]

Great video.

[@SladesVWBeetle]

Thanks so much my friend I truly appreciate it. I hope you have a wonderful Thanksgiving.

[@hosocat1410]

Yes please on rear quarter area video. Thanks!

[@SladesVWBeetle]

Sounds great, thank you so much for chiming in. I will definitely be doing that video.

[@sheldonshirley9500]

Yes I would like to see the video on removing the foam from the quarter panel. I have a 1973 superbettle

[@SladesVWBeetle]

Sounds good Sheldon, I will be doing a video in the next few weeks. Thank you for being here.

[@ferdinandbaez2410]

Would like to see the video on handling the foam behind the rear windows to the engine side. My two beetles got rusted in that area. Thanks

[@kevingendron5586]

Outstanding! It’s great to see someone that loves working on the genius cars. Too bad for me the prices are going up. Please show how to remove the foam near the quarter windows. Thanks!

[@SladesVWBeetle]

The weather is starting to warm up, I’m planning on a trip to the salvage yard. Believe it or not that’s where I am going to film doing the foam removal. Since I can’t do it on my car. Thank you so much for being here.

[@eugenebaroni1298]

Great job 👍 on the sound deadening. I would like to see what you do with the quarter window. Have a good Thanksgiving. Stay safe

[@SladesVWBeetle]

Thanks Eugene, and I definitely will be doing a video in a few weeks on the quarter window foam section. Happy Thanksgiving my friend I hope you have a wonderful holiday.

[@ferdinandbaez2410]

Excellent work. Using your videos on my 71 SB restoration. I would like to see a video on the rusting on the rear panels where the foam is installed. A section of mine was done with fiber glass but I have an area that the rust is bursting. Point me out to a video if it’s done already.. thanks

[@paulgardner6388]

Great video, I'm doing this now on my bug. I look forward to watching video II or at least seeing the end result of the sound deadener so I know how far up to put this in the luggage area. Also looking forward / voting for a video on the removal of the death foam.

[@SladesVWBeetle]

Thank you for being here Paul. The second part of that video unfortunately will be four or five weeks away. But if you scroll back through my channel, I did a part one, and part two sound deadener on my last one. It will give you a great idea. If you need it sooner

[@eduardorodriguez3262]

I will love to see the foam removal vid.... I hate that stuff Enjoy the Holidays stay safe

[@SladesVWBeetle]

Thank you so much I hope you have a wonderful holiday. I will definitely be doing that video in two or three weeks.

[@jamiewalton23]

Great video Slades, never done sound deadening before, huge thanks for the tips. Please could you show the sponge removals as I'm interested to see what you'll replacement it with. Stay safe but see ya soon.

[@SladesVWBeetle]

Thank you so much my friend. I will definitely be doing that video in the next coming weeks. Stay safe and have a happy Thanksgiving.

[@user-cx3gl3np2z]

Hello,can you look into doing one about the heater tube replacement that is located between outer skin and inner footwell,how do you replace that original cardboard tube without cutting out sections of inner body just above heater channels?

[@michaelrobinson1945]

I used Jute for sound deadening the floors. I had solid floors to work with...zero rust, no leaky spots. And a TMI carpet kit over that. TMI seat covers and it feels like a newish car. Luckily the headliner was still in great shape...I don't believe I could have done a good job on that.

[@SladesVWBeetle]

Thanks for commenting Mike, I use the TMI carpet kit on my last one and I was pretty pleased with it to be honest with you. I’m going to be using a TMI upholstery kit for my seats, I hope I’m happy with the outcome. I don’t enjoy doing interior stuff, lol Especially when I did a headliner..what a nightmare 😁

[@mastermatt289]

Yes I would like to see what to do there. Almost every bug I had or worked on even if it was super clean and rust free had that one fender bolt that rusted up and broke off. I didn’t know if that foam was a factory thing or not. I had one the a guy must of bought a case of foam spray and went crazy. This car was rust beyond belief.

[@SladesVWBeetle]

Yes the foam was put in by the factory. I believe in 72 and up is when it got worse. But I’m going to remove mine anyhow just to show what to do. Fender bolts often break off, or the nuts end up rusting and spinning. I have to weld some new ones in place which I will do a short video on. I always use anti-seize when I’m putting all the bolts on. Thank you so much for being here.

[@polypetalous]

Great video, bet the stuff helps the sound a ton! I do and dont wanna see a video on the foam… I got the bubbles forming there on the ‘74 SB, yikes.

[@SladesVWBeetle]

Thank you very much, I will be doing that video in a couple of weeks. It’s really not too hard to do is just a little tedious.

[@JMKGarage]

Nice work, and glad to hear the positive feedback on the new owner of your old super beetle. My beetle is certainly not that quiet inside… sounds like a tin can inside, with a ton of road and engine noise… I’m OK with it as it’s just used for short local drives, but would definitely want to do what you did here if I got opportunity to drive it more

[@SladesVWBeetle]

You truly have a really nice Beetle, I got a tell ya…. it is very sharp. Truthfully, the stuff really silences the car inside. Makes a nice difference.

[@JMKGarage]

@@SladesVWBeetle thank you, I appreciate hearing that. Your ‘68 will be a very nice bug too one you’re finished with it. Keep the videos coming.

[@SladesVWBeetle]

@@JMKGarage Thanks very much I truly appreciate that! I hope that you have a wonderful Thanksgiving.

[@zimms-world]

Great video. I’d love to see you do a video on the death foam. I’m battling it right now on my project. I got most of it out but want to make sure no more rust comes back

[@vintage76vipergreenBeetle]

The death foam was an issue the 73?-77 type 1 cars. The 68-72 cars use different foam materials.

[@SladesVWBeetle]

I will definitely do it, I wasn’t sure what your yours was.

[@SladesVWBeetle]

@@vintage76vipergreenBeetle seems the later years were definitely more of an issue. I’m going to remove mine anyhow, and put the homemade pillows in.

[@tylersanders6080]

Another killer video! I would love to see you do the foam removal on the quarter panels. I have bad rust in those spots on my '74. 👍🏼

[@SladesVWBeetle]

Thank you Tyler, and you can count on it. Give me 2 to 3 weeks and that video will be up.

[@FunFun-tv7gq]

Great job as usual. I am interested in seeing how you would replace the foam behind the quarter windows. Cheers from Melbourne Australia 🇦🇺.

[@SladesVWBeetle]

Thanks very much, I will definitely do that video in a couple of weeks.

[@MusicFan0136]

Beetle aside, you may have just saved my leaking box gutter! Its hard to find people who will work on them anymore.

[@rongibbs1778]

Please make a repaire on the back quarter panel

[@OTTO-1303]

Good vid as usual Death foam removal would be a good video , since you are doing it anyway, document and share, thanks

[@SladesVWBeetle]

Thank you so much, I will definitely be doing that in a couple of weeks, thanks for chiming in.

[@TheWhitetailrancher]

Yes I'd like to see that. If you think its worth doing, Then yep, i would like to see it.

[@SladesVWBeetle]

Sounds great!! Thanks very much, I hope you have a wonderful Thanksgiving.

[@TheWhitetailrancher]

@@SladesVWBeetle My very best Thanksgiving ever! As you know I'm absolutely NOT supposed to be here anymore!

[@SladesVWBeetle]

@@TheWhitetailrancher And I’m very glad you are! Celebrate and smile!!!

[@TheWhitetailrancher]

@@SladesVWBeetle Thank you brother!

[@GT.Bugger]

I've left most of my foam in. Hasn't rusted in almost 50 years so figured it won't so long as I keep an eye on it.

[@SladesVWBeetle]

I think you’re probably plays a part in where you live. If you’re in a dry climate probably not as much to worry about. Hopefully that’s the case lol

[@GT.Bugger]

@@SladesVWBeetleI'm In the cold soggy UK? Lol

[@SladesVWBeetle]

@@GT.Bugger As I get older, the colds not very much fun 😁

[@daGar-qf4cf]

Great video, really appreciate everything you put out. I would definitely like to see how you address the foam issue in the rear window, what do you replace that with?

[@SladesVWBeetle]

I’m actually going to be doing that when it warms up at the junkyard oddly enough. My 68 doesn’t have that type of foam issue. But he has some down there that do. So I’m going to do it there and film.

[@FixinBugsNStuff]

Great work! It will be cool to see about the foam removal. I have done it in many ways but, I am curious what you would do. My current 66 beetle doesn’t seem to have a problem with rust where the foam is. Happy Turkey Day!

[@SladesVWBeetle]

Hey my friend I hope you’re doing well! This probably won’t surprise you much, you’re pretty good at what you do!!! I just figured I better show some folks. I hope that you have a wonderful Thanksgiving my friend!

[@foggyjeweler7423]

Would like to see the foam video

[@stevecurtis3263]

very good info. when you do 2nd layer do you stagger seam or change direction. i have a sb and i would like to see removal and replace of foam. thanks

[@SladesVWBeetle]

When I do the second layer, and I should have mentioned it. I go the opposite direction like a Crosstitch pattern. I surely hope that made sense. I will be doing the foam removal video in a couple of weeks.

[@dubworldvwadventures]

Slade, would it benefit to cut the strips longer so that they fill the dips in the pan better? Stick on one end and roll into each of the lower areas one by one as you move backwards. I’ve never put in any stick on sound deadening on my vw’s before. My concern was always trapping water and causing rust.

[@williamtanner1372]

I think I may need more than 2 rolls when I do my bus. lol Everyone talks about the foam and it needs to be addressed but I haven't seen a video on how to do it. I'd really like to see one. And If Heather is included, the views will be higher.

[@SladesVWBeetle]

Oh wow!!! Yeah a bus you’re gonna quite few rolls! 😁 I’m definitely going to do a video on that farm removal. And of course Heather is always helpful with views. Lol

[@cafo76]

Know-how always appreciated. Thank you. Quick question, any issues gluing your carpet kit on to the aluminum layers? Any suggestions?

[@SladesVWBeetle]

I used the adhesive in a can with a brush over the aluminum, no problems at all!

[@VWBEETLEOVAL1955]

Great video Tony, you are flying again to get this beetle done. I hope you will reduce the noise big time. I don’t know if I will do that in the oval. Still not decided yet.

[@SladesVWBeetle]

Thank you so much my friend, if you’re not going to be driving it every day all over the place, I probably wouldn’t bother. If I had a 1955 I would probably be using the original tar board. Maybe from Wolfsburg west.

[@VWBEETLEOVAL1955]

@@SladesVWBeetle well there was no tarboards installed from the factory, so it would stay original.

[@SladesVWBeetle]

@@VWBEETLEOVAL1955 Oh I never knew that!!! I never had one that old. And I probably will never get to, they are extremely expensive near me. 🥺

[@VWBEETLEOVAL1955]

@@SladesVWBeetle yeah the same deal here, finding NOS is very expensive.

[@SladesVWBeetle]

@@VWBEETLEOVAL1955 Oh I bet it is!!

[@francodesapri9174]

what kind of paint ( the black one you have on the floor pls??????

[@1Also]

Does this material work on keeping heat at bay?

[@jefsch7]

Yes... I'm trying to decide whether to remove that padding that can hold moisture as I'm considering applying Kilmat there; but I have rust bubbles visible on the outside below the half-moon vent.

[@SladesVWBeetle]

That would be from the foam inside of there. You definitely need to address that issue before it would get worse. I have found when I start sanding little bubbles I end up with a hole. 🤦🏼‍♂️

[@SDsailor7]

@@SladesVWBeetle Where do they sell the quick roof aluminum? I dont think you mentioned it. Thank you

[@SDsailor7]

@@SladesVWBeetle How long did it take to do the whole pan?

[@SladesVWBeetle]

@@SDsailor7 I will attach a link in this message to Lowe’s. They are much cheaper than Amazon right now. It took me a couple of hours to do the whole pan. On the last project. I still have to finish this when I have other things going on. www.lowes.com/pd/Peel-Seal-Instant-Waterproof-Repairs-6-in-x-25-ft-Aluminum-Roll-Flashing/1018733

[@PatrickGreen]

Did you ever do the video on removing the foam? I'd love to see it.

[@SladesVWBeetle]

Honestly Patrick I had to wait until winter is over. Mine doesn’t need it done, so I’m going to take out some extra time and go to that salvage yard. And do a demonstration there when the weather is warm.

[@superbear617]

Nice video (again). I have seen this sound deadening treatment, but I was not sure what the product was. Question: when you do the second layer, do you start at the opposite side so you overlap the joints on the first layer?? And, yes, a quick video on that side quarter area would be interesting. Finally, happy Thanksgiving to you and your family as well!!

[@SladesVWBeetle]

Very good question my friend, and I did not think to bring it up!!! When I do the second layer I go the opposite direction. I hope that makes sense? And I will be doing the video with the foam removal and a couple of weeks.

[@superbear617]

@@SladesVWBeetle Makes sense! Thank you!

[@michellepostill8796]

Going to give this stuff a try. Did you also cover the tunnel?

[@SladesVWBeetle]

Only use on your tunnel, if the factory deadener is missing.

[@mikebridgewater9228]

Foam removal would be great

[@SladesVWBeetle]

Sounds great Mike, I will definitely get it done. I hope you have a wonderful Thanksgiving.

[@ScratchProgramming]

What kind of black paint did you use ? Thanks for the video

[@SladesVWBeetle]

I actually use the rust bullet, it dries like a coat of armor. Here’s a video to where I talked about it and showed it. I hope you’re having a great day. kzbin.info/www/bejne/oZfVhGh7bbOJp7M

[@vintage76vipergreenBeetle]

Your 68 doesn't have the bad death foam like the later cars do. The foam in your 68 is better than, what was used in the later cars. Look it up. Its your car either way.

[@SladesVWBeetle]

Yes I believe the scary stuff started in 72 or 73? I can’t remember. I’m going to go ahead and do the video just to help people out. And I might as well go ahead and show them the results of what you can use. I hope you have a great Thanksgiving my friend

[@vintage76vipergreenBeetle]

@@SladesVWBeetle Happy Thanksgiving to you too.

[@mikemcdonald7166]

I have been tempted to use the roofing stuff in the past, but I have read many places that they will make the interior smell really strong of hot tar. Especially on a hot day. Has this not been a problem for you?

[@SladesVWBeetle]

I’ll be very honest with you Mike, I have heard other people say the same thing. And then the other 50% say they didn’t smell anything. Me personally, I have never had any odor from it.

[@geofferyc4080]

Would love to see how to get that foam out of there…

[@SladesVWBeetle]

I need a VW to do that on. Would make a great video! I should go to the salvage yard and do one there

[@supernova6677]

Let's see the foam!

[@BecksTKD]

Do you ever try and clean up the carpet glue and old carpet fuzz before laying this stuff down? Or a general clean did get dirt and dust off?

[@SladesVWBeetle]

Honestly I'll be doing that soon on an upcoming video. If its really bad, I would try and get the heavy stuff off. I sanded one time, but of course had to rattle can the area.

[@BecksTKD]

@@SladesVWBeetle awesome I’ll tune in!! Thanks!!

[@edgarbradford]

Wouldn't it be advantageous to run the 2nd layer opposite the first. Longways first then along the short. You would be pretty much assured you got at least one layer in every single spot.

[@SladesVWBeetle]

Actually you are right. I ended up doing that on my buddies car. I should’ve done it on mine, but I’m just trying to keep the vibration down. Thank you so much for being here.

[@SDsailor7]

Is nice when you don't have the doors in the way.

[@SladesVWBeetle]

Absolutely! That’s why I take advantage of doing videos, so they are better seeing without obstructions.

[@1969nickie]

What happened to the Scat seat install?

[@SladesVWBeetle]

I did not get to that part yet. Although I did order the brackets a few days ago from Jegs. I probably will be doing that very soon, while nothing is in my way.

[@jameski5oeb668]

has there been enough interest on the foam replacement for you to make a video?

[@SladesVWBeetle]

There seems to be, I am currently waiting for him to get a car in for me to do that on.

[@terisahayes6483]

What mils are you using? Thickness

[@SladesVWBeetle]

@@terisahayes6483 I believe the quick roof is approximately 26 mil thick.

[@badbenito]

Ted Bundy approved.

[@SladesVWBeetle]

Thanks very much. I truly appreciate that.

[@natewelch6608]

Did you end up making the foam video?

[@SladesVWBeetle]

No but I will be doing that soon. They were redoing some things down at that salvage yard. That will be this weeks video of being there. And I had to wait, it’s down by a river and it was extremely cold over the winter. In about 30 days hopefully we will be into spring here. He’s going to allow me to demonstrate it on one of the cars down there.

[@rondesjardins2476]

Is Rust Bullet similar to Por-15 ?

[@1tsthelittlethings]

Similar as in they are both a paint... Rust Bullet is much better and tougher...

[@SladesVWBeetle]

Hi Ron, this is a personal opinion, and coming from a friend who used it, he liked the product much better.

[@rongibbs1778]

How come you didn't cover the tunnel also

[@SladesVWBeetle]

The factory sound deadener is still good on there. And I have to weld that part shut first that someone cut open

[@rongibbs1778]

Thank you for your answer

[@SladesVWBeetle]

@@rongibbs1778 And thank you for being here! There will be a part #2 with the sound deadening

[@SDsailor7]

@@SladesVWBeetle Big thanks to the link to lower on the aluminum repair roll.