Vinyl Wrapping Damaged WRX Fender! Using Bondo and More Primer!

Here's part 2 of my Fender Wrapping Experience and also my first time using Bondo... I think it turned out great! Watch and see for yourself. Leave a 👍 for more videos!
All Items used during My Vinyl Wrapping Journey!
Trim Tool Kit: amzn.to/3cmLL2Q
Vinyl Tucking Tools: amzn.to/38fZFjK
Knifeless Tape: amzn.to/2PDil6G
Knifeless Tape & Tool Kit: amzn.to/2wgoQpl
Tack Rags: amzn.to/2Te3hP
Vinyl Wrap Starter Kit: amzn.to/2VzVOeJ
Multi Blade Knife: amzn.to/2vlctbu
Easy Cut Vinyl Tool Snitty: amzn.to/2vyiiCn
Swan Isoprophyl Alcohol 70%: amzn.to/2TcWqFt
Bodywork Items Used:
42pc SandPaper Kit: amzn.to/3cmCaZL
Tack Rags: amzn.to/2Te3hP
Sandable Filler Primer: amzn.to/3akC9nq
Etching Primer: amzn.to/32HuRaC
Masking Film: amzn.to/32GIMh3
Bondo Body Filler: amzn.to/2PCyn0I
Camera Items Used:
Camera Tripod I Use: amzn.to/38fYQHP
Tripod Phone Mount: amzn.to/2VCnuj6
GoPro Hero 5 Black: amzn.to/32FnQHj
EDUTIGE ETM-001 Microphone: amzn.to/3ahIHTG

You Can Follow Me On Instagram 👍 : 06WRXDUDE
Subscribe Here for more videos: / @06wrxdude
Subscribe to my KZbin channel for new videos on any new car parts I buy, installs, tutorials, car events and anything else car related!
Music from Epidemic Sound (www.epidemicsou...

[@andrewtierney1931]

Looking good man especially now the front end is done. Did well to say it was your first time filling a panel as well.

[@marckuyf8647]

Subie is looking better every time. Hard work is paying off 👌🏻💪🏻

[@steveb397]

I respect the grind man improvise, adapt, and overcome!!!

[@SpencerHogg]

Nice job on the vinyl dude looks great

[@oneg35]

what grit did you use to sand the primer?

[@natemagner]

Lookin goood 👍

[@dylanthevillian1]

Excellent vid, bud. How’s it holding up, after 3 years? I’m about to wrap my Land Cruiser, and will be doing bodywork as well. Thanks! 👍🏼👽👍🏼

[@06wrxdude]

Well here’s a video from a year ago. The wrap was about 2 years old. kzbin.info/www/bejne/nISVoIpuj9OtrK8

[@dylanthevillian1]

Thanks again!

[@notorioussouljur]

I like 👍🏼

[@jamesvancamp9813]

Great shit man ever in oregon got a club a 40+ subies we'll right out

[@MrFISCHER420]

Sick!!

[@destructo2505]

How did this hold up? Doing the same process but I’m told you need to wait a week for the primer to let it off gas

[@06wrxdude]

Funny you ask… I’m about to sand it back down to bare metal and do the process over again. It’s been about 5 years and it’s starting to crack. Going to fix the area before I vinyl wrap it again. Overall it was a decent job for my first time 🤷‍♂️

[@destructo2505]

@@06wrxdude nice, 5 years is good enough aha thanks man

[@Nardo_7_R]

Can you do it for my car please do you have a shop that I can come to?

[@06wrxdude]

No shop I’m sorry. Just a dude in the garage

[@ER-nn7dv]

How good does it stick on primer? I put a wide body kit on my car and it’s on primer so I order a sample of the color I’m gonna use and I tried to apply it on the primer and it barley stay even with heat. So I’m kinda scared. I don’t know if because it’s an small piece or it just won’t stick.

[@06wrxdude]

The Avery wrap I used stuck to my primer okay.

[@usa5046]

How's the vinyl holding up on that repaired fender ?

[@06wrxdude]

Still holding strong! 🤞🤞

[@usa5046]

@@06wrxdude nice good job I had a built bugeye not too long ago hows your Hawkeye treating you?

[@shakelmaldonado207]

How much would it cost to professionally get a body work prep like this done before a wrap

[@06wrxdude]

Not cheap I assume. I’ve never paid for body work . I’m a DIY kind of guy.

[@cesarcano6432]

Can you wrap over bare metal if the surface doesnt have any dips and is smoothly even with the rest I’m trying to wrap my hood

[@06wrxdude]

Sure you could but not ideal!

[@swagvids2911]

What grit did u sand the primer before the wrap? Also did you use edger primer or automobile primer?

[@06wrxdude]

I used a 320 sanding block for the primer. I used etching primer for any bare metal areas and followed that with sandable/fillable primer. Here’s a video that goes more in-depth kzbin.info/www/bejne/jWmwn3apd72Nmqc

[@donaldjohnson4570]

I recently had my whole car primered. Going to wrap it next week. I smoothed it out with 600 grit then followed up with 1000, 1500, then 2000. I wanted make sure there was enough surface tension. I also agree @06WRXDUDE to clay bar a few time to get the primer dust from the surface. It's a lot of work.

[@sandwich1247]

@@donaldjohnson4570 how'd it go

[@randabuffer6562]

if you ever paint the fender its going to show the dents lol -autobody guy 15ish years.

[@06wrxdude]

I assumed it would…just my DIY hack job 🤐

[@trustmeiknowwhatimdoing3720]

hey what vinyl brand did you use?

[@06wrxdude]

Avery Dennison

[@meme2363]

God he talks a lot.