How to repair body lines with bondo! auto body filler, diy auto body

In this episode I'll share the process of repairing a cars body lines after being damaged. I'll share to process of pulling out the dent with a spot welder, shaping the metal before filler, mixing filling and blocking body filler. and how I recreate perfect body lines for amazing results!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️
vevor best auto 110v spot welder dent puller
amzn.to/3ShblLB
80 grit hook and loop sand paper
amzn.to/3J2mJGY
320 hook and loop sand paper
amzn.to/3PtUGme
round sanding block
amzn.to/3aSzXJy
dry guide coat
amzn.to/3oD6CGx
evercoat z grip filler
amzn.to/3B6nyfL
evercoat plastic honey
amzn.to/3Po1Rw0
clean sheets mixing board
amzn.to/3rfoeK7
dura block kit
amzn.to/3PE8DNO
motor guard flex block
amzn.to/3JxTUR6
Roberlo me1 2k primer
amzn.to/3xkBhO5
prep solvent
amzn.to/3O3JrR3
Auto body line maker tool
amzn.to/3KxzusJ
mirka dustless sanding system
amzn.to/2Y5h2VE
Icing glazing putty
amzn.to/3iPXVG5
3m Performance paint gun
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
amzn.to/3scqGAf
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
SUPER THANKS button
Business Inquiries: [e-mail]
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
g90 e tool demo
• G90e wavy wire demo #s...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain...
Song: Dipcrusher - Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Dipcrusher - Islands (... ​ -----------------------------------------
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

[@johnm5943]

Thank You for purchasing and using The Auto body Line Marker Tool I manufacture and Sell You do Amazing work. love your Videos

[@PaintSociety]

Great job and loving the new music you’re adding to the videos

[@GarageNoise]

Thank's Brian , I went with epidemic sound. I think you suggested it . Thank's for the support!

[@PaintSociety]

@@GarageNoise yes current beats Great job

[@vanblindguy4600]

I really enjoy the voice over detailed instructions, very very helpful.

[@GarageNoise]

Awesome, appreciate the support!

[@joanwilliams3221]

Great job as always I never quit learning when watching your channel 👍

[@GarageNoise]

That's awsome Joan, I try hard to include new information and topics to keep things somewhat fresh. I really appreciate all the support!

[@shanesmaineshop]

I dont think i would use it enough to justify buying one, but what a great tool for pulling dents. Thanks for sharing.

[@GarageNoise]

Appreciate the support!

[@renecenteno5921]

You make it look easy, great job.

[@GarageNoise]

Thanks so much! Appreciate the support!

[@husky1239]

Great job and I love how you explain things thank you for the video Chris

[@GarageNoise]

Thanks brother! Appreciate all your support!

[@mustangal8534]

I have bad cab corners on my truck and surface rust on the edge of the doors that I want to fix now before they get worse. Your video's will definitely come in handy. Thanks for sharing.

[@GarageNoise]

Thanks for sharing

[@harrydemetro1935]

I’ve been doing crappy body work my whole life I hope this can improve it

[@GarageNoise]

👍

[@benjaminmartinez2877]

Very nice work I started doing body work

[@GarageNoise]

Nice 👍

[@oopspaint]

As always, Chris getting it done!

[@GarageNoise]

Thank's buddy! Appreciate the support

[@MattWilson-nl4zk]

Thanks for the video!!! Great channel!!

[@GarageNoise]

Thanks brother! Appreciate the support!

[@someonethatwatchesyoutube2953]

Beautiful job!

[@GarageNoise]

Thank you!

[@sealisland1]

When doing those pushed in door edges, I've been putting tape on the body hammer head and on the dolly. Works pretty well and doesn't damage the inner panel.

[@GarageNoise]

That's a great point! I forgot to mention it but I had some gorilla tape on the hammer. Thank's for watching Kent Appreciate the support!

[@jimfeaster4837]

Once again insight ! Or input.

[@GarageNoise]

Thank's brother!

[@eazymac904]

Very nice and thorough

[@jeremychippett905]

I love ur videos bro. 📹

[@GarageNoise]

Thank's so much, appreciate the support!

[@diamonddetails9445]

You knocked it out of the park, boss. TYVM for the knowledge and inspiration 😎😎😎😎😎😎💯

[@GarageNoise]

Thank's brother! Appreciate it! It's my pleasure, hope it helps and thanks for the support!

[@zacdrilling4554]

Great job 👍

[@GarageNoise]

Appreciate it!

[@juniorizq2342]

I used reduced black base and a cloth and use it as guidecoat on bare metal

[@GarageNoise]

Good to know maybe I'll try that, I know the make guide coat for metal and some guys use purple markers. Thank's for the comment brother! Appreciate the support!

[@josecontreras9402]

Good video

[@GarageNoise]

Thank's brother! Appreciate the support!

[@rcs0296]

thanks for the video,but I never got a link for the clear base, used as a wet bed, a spot welder has an attachment to install that wire for pulling as well

[@GarageNoise]

Here is the link to a blender amzn.to/3Q9pCYC This is a clear basecoat blender similar to what I use different brand. Appreciate the comment and support!

[@rcs0296]

@@GarageNoise 29 a qt, I can get clearcoat for less than 50 a gal,I think Ill try that first

[@GarageNoise]

@@rcs0296 Richard this is not clearcoat it's clear basecoat. That's what is used for a wet bed. If you want clear coat for around 50.00 upol makes one that I've used quite a bit and it's a good clear.

[@GarageNoise]

Here is the clear coat price went up a bit. amzn.to/3vvc6XD

[@rcs0296]

@@GarageNoise yessir I use that and the primer too, I like not having to buy all different kinds of activator, and yes I understand that its not the same, I dont like using 1k with 2 k products

[@argenisdominguez7395]

Just wondering broo..at what temperature or at what level do you keep the heat.or power or welding power..first timer so my bad.do you have a video where it shows at what temperature 🌡 should keep the level of welding..thanks in advance

[@GarageNoise]

Thank's for the comment, I start out a 5 power level and if I'm not getting the weld I want then I'll increase it from there. Appreciate the support!

[@argenisdominguez7395]

@@GarageNoise thanks for replying back..I appreciate that

[@zztopjhonsson2484]

What about using a shrinking disk?

[@donchoate13]

Are those new T-shirts available.? I think it’s got a 69 Camaro on them .

[@GarageNoise]

Yes, 69 camaro. I'm gonna give a bunch away as soon as they're ready. They will be available for purchase at some point. I'll keep everyone posted.

[@donchoate13]

Ok thanks

[@seaton95]

what size nozzle used for primer.thanks

[@GarageNoise]

1.4 is what I'm using. Appreciate the support!

[@ray6808]

I say a good video would be make one with little or with cheap tools for DIYer to see it can be done.

[@GarageNoise]

👍

[@keithvlogs1]

Its easy if you got the right tool. The problem stems from when an ordinary person spends 80 bucks trying to buy each if these heheh

[@GarageNoise]

True, good point. I did without alot of tools in the beginning. You make do with what you have.

[@rajivsewnandan4865]

You sound like Joe Rogan 🤞

[@GarageNoise]

Maybe I could get some voice over work!🤣 I've had a few others say that.

[@nathanderrick3140]

If you put filler over 80 grit scratches on paint it'll sink back

[@GarageNoise]

I've never had an issue with that , appreciate the comment!

[@ray6808]

I'm in a body shop and I've seen where filler fills those scratches and doesn't show in the paint.

[@handyishrandyish334]

It’s not bondo that’s evercoat. Bondo is just a brand name my teacher use to get mad at us all the time for that 😅😂

[@GarageNoise]

Yeah your right, I put bondo in the title cause that's what everyone searches for.

[@handyishrandyish334]

A smart man I never questioned it! Great video and even better repair

[@Grzegorz-i7g]

the same technic teach me my sensei in Italy hard-working men he told me never to try to do both sides at the same time