Virberello Scooter Tips is live!

[@fredtait5297]

I have a 50cc in Florida in I use it to doordash in I watch your videos it helps me fix it

[@VirberelloScooterTips]

Thank you for watching my videos

[@fredtait5297]

@@VirberelloScooterTips how hard is it to put new engine into one of these moped

[@VirberelloScooterTips]

@@fredtait5297 That is easy but will need a little time to disconnect all the wires It will take you around 3 hrs

[@Tnic79]

Im new to the 50 cc do you have to charge the battery any when you door dash?

[@Nightbaker-qx3ek]

Most spare parts can be purchased on Wal-Mart or Amazon site..Fyi purchase intake manifold in fact one along with tool kit. Also in tool kit have a new Sparkplug,fuses.

[@Scooterman-GY6]

👍🏼👍🏼👍🏼

[@neostouchentertainment549]

I have a 125cc it won't start and i checked COMPRESSION,battery and fuel all fine but only starter and flywheel are turning....i do have light as well.......i dont know what to do now please help virberello.....

[@VirberelloScooterTips]

If your 125cc motorcycle won't start despite having checked the compression, battery, and fuel, and only the starter and flywheel are turning, there could be a few potential issues to investigate: Ignition System: Check if there's a spark when you try to start the engine. Lack of spark could be due to a faulty ignition coil, spark plug, or other components in the ignition system. You may need to replace these parts if they are defective. Fuel System: Even though you've checked that there is fuel, it's possible that the fuel isn't reaching the engine properly. Check the fuel lines for any clogs or leaks. You may also want to clean or replace the fuel filter and ensure the carburetor is functioning correctly. Air Intake: Ensure that the air filter is clean and not clogged. A blocked air filter can prevent the engine from getting enough air for combustion. Timing: If the timing is off, it can prevent the engine from starting. This could be due to a timing chain or belt issue. Check the timing marks to ensure they align correctly. Compression: Although you've checked compression, ensure that it's within the recommended range for your engine. Low compression can prevent the engine from starting. Electrical System: Double-check all electrical connections and wiring to ensure they are secure and free from corrosion. Faulty wiring or connections can prevent the engine from starting. Starter Motor: While the starter motor is turning, it may not be engaging properly with the flywheel. Check the starter motor and solenoid to ensure they are functioning correctly. Engine Seizure: In rare cases, the engine may be seized due to lack of lubrication or other internal issues. Try turning the engine over manually to ensure it's not seized. If you're unable to diagnose the issue yourself, it may be best to consult a professional mechanic or technician who can perform a more thorough inspection and identify the root cause of the problem.

[@dywanebrazier9491]

I have a 150cc a question for you I changed my carburetor but now my scooter want start. I need your help to get it started

[@VirberelloScooterTips]

If you've recently changed the carburetor on your 150cc scooter and it won't start afterward, there are several potential reasons for this issue. Here are some steps you can take to troubleshoot and hopefully get your scooter running again: Check Fuel Flow: Ensure that fuel is reaching the carburetor from the fuel tank. Make sure the fuel valve is open and that there are no obstructions in the fuel line. Verify Choke Position: If your scooter has a manual choke, make sure it's in the correct position for starting. Typically, the choke should be engaged (closed) when starting a cold engine and disengaged (open) once the engine has warmed up. Inspect Fuel and Air Filters: Check the fuel filter to ensure it's not clogged or dirty, restricting fuel flow. Also, inspect the air filter to ensure it's clean and not obstructed, allowing sufficient airflow to the engine. Check Spark: Confirm that the spark plug is properly connected and that there's a strong spark when you try to start the engine. If the spark is weak or nonexistent, you may need to replace the spark plug or check the ignition system for faults. Verify Carburetor Installation: Double-check that the new carburetor is installed correctly and that all connections, including fuel lines and vacuum hoses, are secure. Ensure that any adjustment screws on the carburetor are set to their recommended positions. Check for Air Leaks: Inspect the intake manifold and carburetor mounting gasket for any signs of air leaks. Air leaks can disrupt the air-fuel mixture and prevent the engine from starting. Inspect Carburetor Jets: Make sure the jets inside the carburetor are clean and free of any debris or blockages. Blocked jets can prevent the proper fuel mixture from reaching the engine. Battery Condition: If your scooter has an electric starter, ensure that the battery is sufficiently charged and in good condition. A weak or dead battery can prevent the starter motor from cranking the engine. If you've gone through these steps and your scooter still won't start, it may be necessary to seek assistance from a professional mechanic or scooter technician who can diagnose the issue more thoroughly. They may have specialized tools and knowledge to pinpoint the problem and get your scooter back on the road.

[@dywanebrazier9491]

@VirberelloScooterTips ok will do I appreciate you trying to help us me and my spouse with our scooters. Because it's been almost year since we've gotten to ride them. Again thank you so much (SIR)!!!!!!!!!

[@karmarandall4240]

Promo*SM 😥

[@VirberelloScooterTips]

Thank you for watching my video