VirtualDJ 8: Control 4 decks with a 2 deck controller

[@weimarc.flores1983]

thank you so much.I was looking for this information for half a day.

[@ManicTwig85]

Found this usfull after 3 years haha cheers man

[@Pecocky]

probably won’t get a reply cause this is so old but when i use this code it’s taking the song with it to the next deck??? not sure why , i’m using ddj sb3 and it has deck 3 and 4 buttons

[@syidg5077]

Wow!!!! i knew there was some kind of way to do... Respect on the script... thanks!!!

[@boripapi100]

Thank You For This Mapping It Works With Numark Mixtrack 2 The Pfl Version

[@poche2521]

actually i found it i went to playlist usually not many arrange this section your awesome man!

[@tkleeschulte2011]

I have a numark mixtrack pro 2 and I tried to map it and the same button only controls the right side

[@NightshiftSoundsDJ]

This might be the wrong place to ask, but I need to ask anyway... Echo Papa, you seem to know all there is to know about VDJ8... I'm trying to get my Denon MC6000 (original, NOT the Mark II) to operate in 2 DECK mode. Basically, a left deck/right deck operation. Nothing seems to work. Can you offer any suggestions? Please???

[@pentagonedm3384]

Dude I need your help for mapping , how to map the two channel mixer + volume control in midi controller for 4 channels using shift button, while using 4 deck mode

[@kavenwaysome1624]

How can I get my Numark NDX 500 to connect to virtual DJ 8 on the Numark ndx 500 screen it says connected but virtual dj do not recognize it

[@montoyapbl]

Hello, can i do the same thing in rekordbox? I have pioneer RB controller. I want to mix with 4 decks in 2 decks controller. Answer me if that is possible? thank you !!

[@Merom]

Hey, Can you do this but than that deck 1 + 2 is playing if you press play on the left deck ?

[@petepercussion]

Hi Echo Papa please could you do a video or something for what i want to do listed below here goes I want to copy my entire music folder that i use on my main laptop (a) to my back laptop b retaining all the cue points ,colour coding and star rating etc.The music on laptop a is on my desktop so just normally access from down the side in virtual dj. I dont have it in favourites etc just that all music master with its sub folders 80,s 90s etc. it is very important that i retain all co;out coding and star ratings that have to be a long while to do. Thanks for your help in advance.

[@edwardrodriguez166]

How I do that with a Dj console mk2 ? in Virtual dj. Please help.

[@djthiagomarquesdetudoumpouco]

boa noite como faço pra usar a controladora numark mixtrak dois deck no virtual dj com quatro deck

[@michaelangelo8001]

I have my Twich set up this way. Run my turntables through it on decks 3 & 4. The setup is a real sleeper. Most people have no idea that the Twitch is anything other than a mixer.

[@EchoPapa]

Michael Angelo That is smart. 😀

[@michaelangelo8001]

I've done a lot of custom mapping/programming on the Twitch, and it's a wonderful little instrument the way I now have it configured. I love it, gives me the option of just banging tracks out digitally on the Twitch with full on-the-fly remix capabilities etc, using soundcode, or playing real vinyl via the pass thru on my Traktor soundcard. Pretty much the best of all worlds. Now if I could only find some practical way to rectify VDJ's awkward, backward waveforms...

[@EchoPapa]

@@michaelangelo8001 Is it just a controller or does it act as a physical mixer also?

[@michaelangelo8001]

Best to look it up on the Web for yourself, rather than have me try to explain all the details... But the Novation Twitch (discontinued for a couple of years now) is a full featured controller/mixer engineered for Serato Itch. Because of its unique design, it looks like a small mixer, but is capable of so much more: kzbin.info/www/bejne/q4qmcoOJe7NgoNU However, if you are asking if it will function as a standalone analog mixer, the answer is no... It is strictly a midi device. I run the output though a small secondary mixer, and set my final output trim, EQs, etc, there. This enables me to have all the controls on the Twitch, set normally flat. By utilizing the pass through feature of my sound card, I can then switch one or both chanel inputs, to "phono" on the secondary mixer, and mix in real vinyl whenever the occasion arises.

[@MrSlomotion007]

So how would that look in the audio config: Deck1= V7 ASIO= Out1 Mono Deck2= V7 ASIO=Out2 Mono Deck3= V7 ASIO=Out3 Mono Deck4= V7 ASIO=Out4 Mono Is that correct? Will it require me to change the way I currently have my cable connections? I also have a Pioneer DDJ-SB. Could I set that controller up to control decks 3&4?

[@EchoPapa]

MrSlomotion007 That is correct. Here is a video that demonstrates it with a different audio card. kzbin.info/www/bejne/aJ3JlWufetZ1rrM

[@MrDomsem]

Does this apply on the ddj sx

[@MrSlomotion007]

This video was perfect! Been looking for it forever. I have 2 Numark V7's and a Behringer DJX700 mixer and I finally got it mapped to control 4 decks...but I have no sound out of decks 3 and 4. I can control them just not hear anything. I need a step by step on how to set up the whole audio config. Can you hook me up? I do not have a seperate sound card. Do I need one?

[@EchoPapa]

You need a separate sound card if you want 4 channels of audio. So if u only have the V7's, you have 2 options; either you let decks 1&3 and 1&4 share or you switch to mono mode and split up your individual channels into 4 mono channels.

[@dawansukmatthiusblah3143]

I have Numark Mixtrack 3 How to do it with Mixtrack 3 Not pro. Please please

[@MrSlomotion007]

Mad Props to you , Bro! I got the V7's working. Spent all night practicing. One more question..can the Pioneer DDJ-SB be configured to control 4 decks as well?

[@EchoPapa]

Any 2 deck controller should work, you just need to find a button to use. Or if u don't have a spare button, try mapping it to the keyboard.

[@julygiordano14]

I have a Wego 3, what can I do To play witch 4 deks? Somebody speak spanish, that would help me n.n thnks

[@PressNPlayOfficial]

which skin is that? i cant seem to find it

[@EchoPapa]

It's the default skin, just in 4 deck mode. Look at the top bar and click on 2 deck, you will get a drop box that will let u choose 4 deck mode. Later

[@PressNPlayOfficial]

Echo Papa i've tried that and i always get a pop-up saying impossible to open skin virtualdj8:4 decks

[@EchoPapa]

PressNPlayOfficial Try going into settings and skins. See if it's in the list. If not u may have deleted it accidentally.

[@PressNPlayOfficial]

Echo Papa it only says internal...nothing else...ive never ever been able to put 4 decks on the default skin...im using a beta version 2191.295 is there a link where i can download the default skin and re install it?this is really weird

[@EchoPapa]

All downloadable skins are at VirtualDj.com - Addons - VDJ8. Or redownload and install the software.

[@djdrow9369]

tnx you so much , hi from chile

[@armak97]

THANK YOU!

[@ephrahimchristian3315]

thanks a lot buddy...

[@stephanpetit5199]

it perfectly work

[@boripapi100]

now im able to mix on four decks

[@jonschannel5850]

thank you

[@boripapi100]

thank you for this code

[@lafrogmhh]

works thanks

[@Mixed.Sounds]

lets fucking go.

[@boripapi100]

I Cant Thank You Enough

[@jcasanova4213]

thank you thank you thank you

[@EchoPapa]

No problem.

[@edwardrodriguez166]

??

[@tkleeschulte2011]

I have a numark mixtrack pro 2 and I tried to map it and the same button only controls the right side