In this episode I talk through painting a customers MG Midget 1500 in a beautiful metalic silver! I'm delighted with the results! / visionautogarage / visionautogarage / visionautogarage
Пікірлер: 72
@darlocoluk94444 жыл бұрын
The Spray gun really needs to be more of an angle to get the paint on the bottom of the sills, try to bend your back a bit more and be flexible & please lay out your airline so that you have no knots - nothing worse than having to fight with an airline when painting . I am a time served vehicle spray painter with over 40 years experience & at one time had my own repair business. My comments are only as tips to try to help you - not as any criticism. My first garage was very similar to yours, no booth & yes I watered the floor too. If you are going to do a lot of spraying, particularly any involving a hardener please try & invest in a air fed mask. The charcoal filter type has its limits. I did enjoy watching you paint the car & it did look a nice job, all the best for the future .
@North491913 жыл бұрын
finally a silver MG
@sallyussher76675 жыл бұрын
More excellent work. FYI, it's a bad idea to leave the masking plastic flapping as you did: the overspray that sticks to the plastic then tends to get flicked up over the fresh paint. Also, if you don't wear a spray suit, you tend to drop cloth fibres into the paint as you reach over the vehicle. This is just nitpicking: you did a superb job that you should be proud of :)
@tomanderson-king18795 жыл бұрын
Absolutely spectacular, you make it look so easy! Your videos have encouraged me to think seriously about doing bodywork on my own Midget, whereas I was too scared to think about it before.
@VisionAutoGarage5 жыл бұрын
Thank you Tom! Take your time and be methodical, prep is 95% of the work. Good luck!
@haroldkreye87703 ай бұрын
A beautiful result, and I have learned much. Thank you.
@salsalero12775 жыл бұрын
My '73 Midget is that exact same color, it's been parked in my garage since 1987 , time to restore it now that I'm retired. Good video by the way.
@VisionAutoGarage5 жыл бұрын
Wow sounds nice! Enjoy! Thanks for watching!
@thomastice34755 жыл бұрын
La calacacaca I have a orange 73 midget that I haft to restor
@johndeacetis47072 жыл бұрын
In 1981... I recall someone painting a midget. 68 spec...with Matt red spec paint !....well the owner did try to pass the midget of as an investor....using probably..an electric sprayers...with the motor built into the soraygun......he ended up working for a dry cleaner ..maybe the manager took the car of his hand ..and gave him a trouser press for his own use ...and 20 hrs a week..job
@johnnysmith8634 жыл бұрын
Very nicely done and a great colour too. Mine needs painting again... I don't think I'll be doing it myself but you've given me an idea for the colour!
@VisionAutoGarage4 жыл бұрын
Thank you! And you're welcome, it's a stunning colour!
@shandogdad2 жыл бұрын
Great job on the paint, not easy when u don't have a booth.
@Anderzander5 жыл бұрын
Beautiful colour ! That and the finish really lifts the car 👍🏻
@marksmith27384 жыл бұрын
Can't say enough good things about this paint job. It looks amazing!! Well done!
@VisionAutoGarage4 жыл бұрын
Thank you
@starckmad17795 жыл бұрын
First to comment! Looks great! I'm glad you did it it in your shop. Gives hope for the rest of us DIY ers.
@mathewcozens50445 жыл бұрын
Great work as always and can’t wait to get her back and start with the fun stuff. Cheers Rob
@VisionAutoGarage5 жыл бұрын
Make sure you bring it back for a visit once its finished Mat!
@tomchurchyard84895 жыл бұрын
Lovely job been watching on facebook getting tips for my own project. Keep them coming and keep up the good work.
@VisionAutoGarage5 жыл бұрын
Thanks Tom! All the best with your project.
@lynnbourg49704 жыл бұрын
I am not a fan of silver, BUT that thing is beautiful. I guess I am a fan of silver now.
@timothyhall76065 жыл бұрын
Beautiful! Well done!
@VisionAutoGarage5 жыл бұрын
Thank you very much!
@edwardwright80964 жыл бұрын
Stunning
@VisionAutoGarage4 жыл бұрын
Thank you!
@anthonynatas50085 жыл бұрын
Excellent work my friend!
@VisionAutoGarage5 жыл бұрын
Thank you
@Gopherdave15 жыл бұрын
Damn you do nice work and make nice videos, very professional! Thank you!
@VisionAutoGarage5 жыл бұрын
Thank you! And thanks for watching!
@KloudCACA5 жыл бұрын
Sweet color dude...
@michaeljohnston60124 жыл бұрын
Looks great
@michaelbradley40505 жыл бұрын
Great job!
@VisionAutoGarage5 жыл бұрын
Thank you
@donnlowe91293 жыл бұрын
I like your video better without the music and it appears your exhaust fans Aren't doing their job when your Spraying the clear coat.Nice work.
@donrichards54354 жыл бұрын
😀my MG MIDGET was canary yellow which was original paint. Needless to say she got washed and waxed every weekend.
@jameswelsh5672 Жыл бұрын
Maybe I have been unable to find it but do you the video of the Midget once it is complete?
@ajanlit68922 жыл бұрын
I love your job. How much it cost for paint this car?
@LR950515 жыл бұрын
How much is to do a restoration like this? I found a car but they want 1k for it there is some visible rust but I’m not sure of the extent of it. Might offer them £500 hopefully they’ll accept it
@beginningvisionschilddevel9884 жыл бұрын
i have a 73 that i would love to do a frame off restoration...if you had to put a dollar amount on something like you've done all the way up to turn key ready...what would you say ?. thank you
@autoroom215 жыл бұрын
Hi mate great vid - which fans have you got installed? What breathing equipment would you recommend also? Cheers!
@VisionAutoGarage5 жыл бұрын
Thanks! I have two large 240v fans, in wooden housings with fibre-glass based filters. For breathing equipment, you're best looking though the many safety documents regarding isocyanates and make your own decision - I wouldn't like to advise, the consequences of getting it wrong could be fatal!
@studioequip Жыл бұрын
what an amzing job!!!!!!!!!!!!!!!!!!! is this the modern grigio ferro metallic???? whats the paint code
@VisionAutoGarage Жыл бұрын
Thank you! Always nice to get comments like this even a long time later! Its FER702
@studioequip Жыл бұрын
so whats the paint code.
@VisionAutoGarage Жыл бұрын
@@studioequip FER702
@studioequip Жыл бұрын
@@VisionAutoGarage thank you !...
@jeremiahnave42922 жыл бұрын
interesting color but where is the final reveal? 3 years and other cars are seen but this car has vanished and we never see it on the road
@VisionAutoGarage2 жыл бұрын
Hi. This was a customers car, so it’s with the customer…I didn’t feel like it was my car to “reveal”. Thanks for watching.
@MagicAyrtonforever5 жыл бұрын
That offside rear wing got missed at the back several times.. Did no one see it??!
@user7AAA4 жыл бұрын
I saw him missed that area several times too!!
@johnclayton66764 жыл бұрын
What happened after this episode, can't find any follow ups
@VisionAutoGarage4 жыл бұрын
This was a customer car, so hopefully the customer is now enjoying it :)
@waldenhouse5 жыл бұрын
Super job, but are you going to “bake” it?
@VisionAutoGarage5 жыл бұрын
Thanks! There's no need to bake it, clear coat is available in several curing speeds, so it can be adjusted to a couple of temperature ranges, but either way baking is all about speeding up the process. If I had a temperature controlled booth I would :)
@lesmauldin38573 жыл бұрын
How many liters of paint did you apply?
@llessibm5 жыл бұрын
I wished that my '66 wire wheeled midget looked like this, sold it for £200 many years ago, regretted it ever since
@VisionAutoGarage5 жыл бұрын
+Martin Bissell there is always one that gets away! My first Midget was a 72 rwa reg LMG 5K. It was quite far gone and I sold it for next to nothing!
@dee106ful5 жыл бұрын
Did you get runs on the drivers door ? Would like to see you spray at same starting point throughout the process.
@VisionAutoGarage5 жыл бұрын
+dee106ful no runs on the door.
@adsminibuild57915 жыл бұрын
Lovely job 👍 I'm planning on painting my mini in the summer, in a single garage and was thinking of using cellulose+clear. Would you recommend this for home use or be better with 2k for someone who's never painted a car?
@VisionAutoGarage5 жыл бұрын
I've never painted with Cellulose but the easiest method would be 2k solid colour, as there's no need for a clear/lacquer. I always use base and clear unless requested to use solid colour. Whatever you use, just be sure to protect yourself!
@VisionAutoGarage5 жыл бұрын
Read up on all the options and the health risks and factor in the cost of keeping yourself alive for longer :)
@adsminibuild57915 жыл бұрын
@@VisionAutoGarage thanks for the info 👍
@VisionAutoGarage5 жыл бұрын
@@adsminibuild5791 Look forward to seeing your videos :)
@adsminibuild57915 жыл бұрын
@@VisionAutoGarage thanks 👍 and thanks for the advice. One big learning curve, never stop!
@michaeljohnjames79983 жыл бұрын
Looks gorgeous what is the colour please?
@jeffhildreth92442 жыл бұрын
Go up and read the description of the video.. the color is there.
@racketman2u5 жыл бұрын
Makes me realise how boring the factory paint colours were back in the day!
@donrichards54354 жыл бұрын
😞I was sorry to see the MG go but in todays market I feel it would of lost it character and simplicity!
@jimmytwizzle78364 жыл бұрын
Not aware that mask filters the toxic vapeurs of two pack which is why professionals have a separate air supple to breathe from. Spraying two pack at home is dangerous. Many people have killed themselves with the vapors.
@VisionAutoGarage4 жыл бұрын
People should read the safety data. I’m not commenting or advising.