Finding you on KZbin and joining the fb group has really opened my eyes to the kind of heating engineer I aspire to be. Thank you for your time.
@RayMondElec3 жыл бұрын
Thank you for taking the time and trouble for the video👍
@viessmanndirect4024 жыл бұрын
Nice job as always Andrew :)
@andrewmillwardwatford94104 жыл бұрын
Thanks John
@italianjob-vx6hp3 жыл бұрын
Lovely work ang great knowledge set. Have a new Viessmann 200w here with jig and flue. Struggling to find a competent person to fit it in a like for like swap out of a vaillant ecomax , in what could be the easiest replacement ever.
@andrewmillwardwatford94103 жыл бұрын
Where are you ?
@italianjob-vx6hp3 жыл бұрын
@@andrewmillwardwatford9410 in Somerset
@andrewmillwardwatford94103 жыл бұрын
@@italianjob-vx6hp I will find you an instaler. Pm me
@italianjob-vx6hp3 жыл бұрын
@@andrewmillwardwatford9410 thanks. Problem I have so far crazy quotes for what is an easy job. I know what I want to pay to fit this boiler.
@italianjob-vx6hp3 жыл бұрын
@@andrewmillwardwatford9410 I have emailed the Heat Geek
@snips73 Жыл бұрын
Hi Andrew, do you prefer the heat exchanger over a low loss header? I’ve got a complex property and being told a low loss header is required.
@andrewmillwardwatford9410 Жыл бұрын
Not preferred, it's got advantages and disadvantages.
@ecowarrior43554 жыл бұрын
Mr Combi - "If you are listening" lol - great comment.
@Richard-ij8ge4 жыл бұрын
Fair play Andy, your skill set dwarfs that of the average heating engineer including myself. Will you be looking to get into air source heat pumps and hybrid installations in the near future?
@andrewmillwardwatford94104 жыл бұрын
Already quoting for them but I'm not convinced its time for most customers yet.
@DaveXPAC3 жыл бұрын
Great install Andy. Beautiful. How do you like the Vitodens?
@andrewmillwardwatford94103 жыл бұрын
Its by far the best boiler in the UK.
@MSKChess4 жыл бұрын
Norwegian company Oso makes A-rated cylinders :)
@andrewmillwardwatford94104 жыл бұрын
Viessmann is A+
@MSKChess4 жыл бұрын
@@andrewmillwardwatford9410 A+ rating only on 160l and 200l versions, but yeah a Vitocell-300 V EVIA-A+ is £2.4K, an Oso Delta Coil 300l (A-rated) is £1.3K including vat, Viessmann 10 years guarantee on tank, Oso 25 years guarantee. Delta coil heat loss 3.5°C over 24 hrs or so it is claimed. Haven't compared the specs to be honest but videos are super interesting, thanks for making them, I am learning a lot.
@asif5304 жыл бұрын
Good video. Out of curiosity if the pump is positive pressure and depending on the size of pipework is that why a 8m head can pump to the upper floors which are greater than 8m?
@andrewmillwardwatford94104 жыл бұрын
The heating pump is in a circulsting system and so only needs to overcome the frictional resistances of the system.
@andrewalderson14 жыл бұрын
Lovely job, Andrew! Why not use one big plate at the point where the existing system begins, and keep the plant room completely sealed? Unless I’m not quite understanding the configuration.
@andrewmillwardwatford94104 жыл бұрын
I've done two off these now. One with a single plate and single pump and then this one. Its was about 6 or 7 hundred pounds cheaper this was as we had the pumps, the two plates are 170 ish rather than 600 for the single. Im just starting my third one if these today. Using two plates the existing pump and an additional matching pump.
@greenyamo13214 жыл бұрын
Flexible pipes onto the potable expansion vessels is against water regs
@andrewmillwardwatford94104 жыл бұрын
Do you have a reference for that. The flexible connectors come with the cylinders as a package may not be altered under g3.
@greenyamo13214 жыл бұрын
Andrew Millward should have been covered when you did your G3 training and assessment
@andrewmillwardwatford94104 жыл бұрын
@@greenyamo1321 no i was told I cant modify a package and must install as intended by the manufacturer
@greenyamo13214 жыл бұрын
Andrew Millward I don’t think the regs want you to install a 400mm dead leg, a flow through tee is the correct method.
@andrewmillwardwatford94104 жыл бұрын
@@greenyamo1321 this is why regulations need to be clear. One im not aware of requires me to break one I am aware of.