VLT® Drives: The drive is displaying an Alarm 14 or Alarm 45 Earth Fault

This video discusses information and common troubleshooting tips for a Danfoss VLT® variable frequency drive in which the drive displays an Alarm 14 or 45 Earth Fault that cannot be cleared.
For additional information please visit www.danfossdrives.com
* If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677)
or
E-mail:
Customer Service: [e-mail]
Technical Support: [e-mail]
After Sales Service: [e-mail]
For additional AC Drive Technical Support, subscribe to the Danfoss Drives newsletter at bit.ly/NAMDDSNews.

[@maxesamusements5202]

Thank you very much for your help

[@DanfossdrivesNA]

You are welcome

[@மண்புழு87]

Watching your video helps to improve my skills life.thank you very much sir

[@Hi-CHOICE]

எப்படி சரி செய்வது alarm 14 m

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@sudharathna]

What’s the sensitivity or min earth leakage current for the vfd to cause earth fault alarm or trip

[@automesinmechatronic5206]

Warning 66 low temperatur please solution?

[@jhonnybellohidalgo4417]

in the fc101 models they do not have common current sensors, apparently the measurement is taken through the dc bus, because in my case I have an fc101 and the alarm 16 short circuit persists, having already measured the igbt module correctly

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@stalinsubbiah3238]

Sir: Put Video to install Dansfoss AC Drive, Parameter Settings and Troubleshoot it

[@DanfossdrivesNA]

Thank you for the suggestion, I have shared it with our training department.

[@user-kz3re5ym7h]

At 5:16, you spoke about high voltage frequency pulses that can find pass to ground through the smallest pinholes of insulation. How can we confirm this is the case? Will a Megger test or insulation resistance test be able to detect such minor pinhole leaks?

[@Julhas1850]

Please sir explain me:What is the causes of ground fault or earth fault(Alarm-:14)without load?this is a danfoss vlt 2800 and vlt 5000 series inverter....i am from bd supplier...

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com. Or if you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677) or E-mail: Customer Service: [e-mail] Technical Support: [e-mail] After Sales Service: [e-mail]

[@WaseemAlhazm]

FC102N showing the earth's fault, . During removing the cable it does not show the earth fault when we are connecting the motor cable it starts showing the earth fault. We checked the cable and motor and found it normal. Then what is the actual reason and what is the solution.

[@tariqpervez8385]

Dear Sir ,could you guide me regarding danfoss FC202 .Alarm earth fault 13 (A14),Sir how can resolve this fault .hope you will help me ,waiting your prompt response .

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@suhailjamadar7267]

AL-048 Gate drive voltage fault What's the solution for this alarm. Please help me out

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@jeffcuyos8454]

How about gate drive voltage fault It means. The supply of power card is out of range. Can you tell me how fix it fast?

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com. * If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677) or by E-mail: Customer Service: [e-mail] Technical Support: [e-mail] After Sales Service: [e-mail]

[@habeebolayinka6922]

Qe2s

[@ducnghiabk2007]

Dear Sir. We have one drive fc 302 earth fault 2 when it starting. We have checked earth connection motor cable ok. But we can not reset this fault? ( Please help or bypass this fault?)

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@shashikumar3113]

Replaced motor out put CTs

[@raoulboumi4043]

I have an alarm on my danfoss vlt internal MCO error[A199] Please how can i solve it

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@gajananr.maneshirol2710]

Sir on disply shows some frequency when start...But motor not start....what possibility ?

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@thailottery1986]

I have vlt microdrive this one running without motor when connected the motor shows alaram 16 pls send solution

[@shashikumar3113]

Replaced IGBT module ......

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@Julhas1850]

Please sir tell me.there is any component problem in the inverter,showing error -earth or ground fault...how to check in the in inverter there is any component...please sir,i need a help...i am from bangladesh

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com * If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677) or E-mail: Customer Service: [e-mail] Technical Support: [e-mail] After Sales Service: [e-mail]

[@user-pb3hi2ho3o]

​@@DanfossdrivesNA 0:54

[@willykristanto9957]

Please help, vlt5000, alarm 15

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com * If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677) or E-mail: Customer Service: [e-mail] Technical Support: [e-mail] After Sales Service: [e-mail]

[@hvacandvrvspecialvedoindus7891]

Sar my denforse alarm continue bilinking and warning light aup 🙏

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@ShriHariPrabhuBhakt]

Sir vfd not run in AUTO mode And alarm show U 12 Please Urgently for me

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@savewater53]

Sir showing boot during turn on and it not gone...

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@RajeshKumar-uh7mr]

Hello sir vlt 2900 Run command after Err 14

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@rameshpawar1412]

AL 13 please solution

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com * If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677) or E-mail: Customer Service: [e-mail] Technical Support: [e-mail] After Sales Service: [e-mail]

[@carlosbonilla3497]

fault internal 2068 (a38)

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com * If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677) or E-mail: Customer Service: [e-mail] Technical Support: [e-mail] After Sales Service: [e-mail]

[@hvacandvrvspecialvedoindus7891]

Helap

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail] or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)