EASY projects to engrave and sell FAST

[@VoeltnerWoodworking]

Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP Check out the 40w module upgrade for the xTool and see how it compares to a 40w Co2 laser: kzbin.info/www/bejne/eGGzp3eJrLCKqbs

[@djeletropopstarify]

it's realy nice that you have such a busineses us hoby loby in US because in Lithuania we don't

[@VoeltnerWoodworking]

Very sorry to hear that. Stores like this are inspiring for projects.

[@margueritewhite3038]

To save material when you are setting up your rotary: Wrap your tumbler in foil then put painter's tape or masking tape around it. Engrave. It will not harm the tumbler and let you see if you have it set up the way you want. These are some great ideas!! Thank you!!

[@VoeltnerWoodworking]

That's a great idea!

[@michaelj8637]

Thank you!

[@lindascraftsandthings915]

I'm not sure I understand what you're saying. Do you mean that the laser will engrave the aluminum foil instead of the tumbler?

[@VoeltnerWoodworking]

I believe she was referring to testing before actually engraving so you don’t have to waste tumblers.

[@margueritewhite3038]

@@lindascraftsandthings915 as Voeltner Woodworking stated, for testing only. Once you ruin one or two tumblers because you had it set up wrong you look for other alternatives!!

[@laurieclos]

This is by far my FAVORITE video for this information! Dude! Great job!

[@VoeltnerWoodworking]

Thank you. Appreciate that.

[@karolvasquez3125]

This is by far the greates video I've come across that is teaching me how to survive in this crazy economy. Thank you so much. I truly appreciate your time and help.

[@VoeltnerWoodworking]

That’s great. Thanks for the feedback.

[@AndyBirdBuilds]

Congrats on this banger of a video!

[@VoeltnerWoodworking]

Appreciate it dude!

[@lasersandbeyond]

I have not even finished the video. I laughed, out loud, at the 16 second mark, when you said "hey" and pointed at the hay. 'nuff said. Dad humor appreciated. I'll finish watching now. lol

[@VoeltnerWoodworking]

Haha. I can’t help it. Plenty of eye rolls around my house. 😂

[@jerribresnahan8158]

As a hygienist who is patiently waiting for my laser to arrive. I love your shirt!!

[@VoeltnerWoodworking]

Haha. Designed it myself. 😬

[@GokouZWAR]

You should try the lasermatic by Roly. Theirs comes with honeycomb bed, full enclosure with exhaust and fully assembled. You’re up and running in 10 minutes and it’s $1399. Cheaper better and has the same power. You can also get an upgrade to 30w if you want. Comes with the rotary tool as well. It basically is all in one where with xtool you gotta pay to have the extras like the enclosure and honeycomb bed. Plus Roly has it all setup out of the box. You take off one or two shipping reinforcement and then it’s good to go.

[@Original_Waterboy]

Dollar store has a ton of Bass wood. Longer ray five ten watt is only three twenty nine and has one of the best detail lasers you can get for the price

[@VoeltnerWoodworking]

I haven’t checked out dollar store. Thanks for that tip.

[@jedikevin20]

A big unknown that I do great with us making electrical Control tag plates, push button legend plates Etc. Most companies want oil resistant custom tags and getting a dual color composite material so the letters are easily seen has been great.

[@VoeltnerWoodworking]

That’s a great idea!

[@JasonPeltier]

I've done a lot of last minute cutting board engravings for wedding gifts. People will go by Ollie's (a clearance store) and get one of those 9" x 12" boards and I can put the name on it in about 20 minutes. It's definitely a quick turnover rate. I should go to Ollie's and buy up a bunch of them to have ready.

[@VoeltnerWoodworking]

For sure! It’s a great way to make a couple of extra bucks with minimal effort. 👊🏼

[@APE-X-designs]

Really love the ideas you have come up with! Just ordered the Xtool S1 Thanks to your recommendation in another video!

[@VoeltnerWoodworking]

Thanks so much! You’re gonna love the S1.

[@engravedwithelegance3651]

I’ve been using hobby lobby for my business for ever!

[@VoeltnerWoodworking]

such a great place!

[@bekicarr6024]

Just found you and with just one video I know I’ll learn so much from you! My D1 Pro 20w is out of the box and assembled but that’s as far as I’ve gotten.

[@VoeltnerWoodworking]

Thanks so much! That's a great beginner machine that will teach you a lot about laser engraving.

[@juliemyersofficial]

Great idea! Last July I got a slab of wood that came from a tree trunk, from hobby lobby, I made a ring holder for my Goddaughter and fiance/husband. I put their full names, then 2 strips of rectangles 1 under each name and then roto zipped those rectangles out for their rings to sit in. I am putting a hole or hanger on the back side so it can be hung up and a forever keepsake. I've never seen another one like it. The last name is Paris so the A in the name was the Eiffel tower. It turned out amazing! This is just for anyone wanting to personalize stuff for wedding, anniversary, etc.

[@VoeltnerWoodworking]

That sounds like a great project!

[@RonMarshallrone]

I have the 20w xtool and 100w c02 OMtech. Love them both. Nice video and yes these are money makers. The xtool paid for itself in 3 weeks.

[@VoeltnerWoodworking]

Lots of great opportunities with both of them for sure. Thanks for watching!

[@myhoneyshandmade1077]

Congrats. Thoughts on omtech? Thinking of getting the 24x36 80w.

[@VoeltnerWoodworking]

@myhoneyshandmade1077 I love my OMTech. I have another video on it listed on my channel. I have the AF3555 and it’s been a fantastic machine. I’ve got a discount code for that OMTech if you want it, too.

[@xisssd]

returned the purchase? and what did you engrave?

[@VoeltnerWoodworking]

@xisssd I’m not sure what you mean? Returned what?

[@roystheboy]

My first Laser is on the way thanks for this video lot's of great ideas

[@VoeltnerWoodworking]

That's awesome! Congratulations. You're gonna love it.

[@ChristianTinyLiving]

Very very informative amen. I'm all in! Thanks much for sharing.

[@61spindrift]

Thanks Matt and enjoyed the video for its idea's. But true story here. Long story short, moved and at 62 not looking to work framing houses anymore. Have lots of tools (every carpentry tool imaginable and recently bought a D1. Lots of time on my hands and have made a total of 10 stove top covers and 6 cutting boards. Love the work but do not know where to sell what I have made. Gave a bunch to family and friends.

[@VoeltnerWoodworking]

Off to a great start! If your friends and family can post some photos on social media and tag you, I'm sure you'll start generating some customers by word of mouth. You can always try listing on Etsy or Facebook marketplace; with Etsy, the more you sell the more credibility you get with reviews. Best of luck to you!

[@Cricuter]

So many great ideas! Love your channel

[@VoeltnerWoodworking]

Thank you! Glad you enjoyed it.

[@feelgoodpiano]

Wow! This is a great video! Dude, you’re legit! I’m ordering mine using your link next week! 🙌🏼 I might reach out! 😅

[@VoeltnerWoodworking]

Thank you so much. I appreciate that.

[@Tennessee3]

Really thinking do this for a full time job. Try it part time then hopefully take off.

[@VoeltnerWoodworking]

Best of luck to you! It's a lot of fun. I don't do it full time right now...just a side hustle to help me support my hobby.

[@NewmanSpecialsWoodwork]

I’ll agree with all the comments on the helpful video brother! Love it!

[@VoeltnerWoodworking]

Thanks Logan!

[@scrappymama1]

Thanks for all the great resources, tips and honesty.

[@VoeltnerWoodworking]

You bet! Thanks for watching and subscribing!

[@purplepixiepops3037]

I think you just sold me on this machine lol, thanks for teh great information!

[@VoeltnerWoodworking]

It’s a great machine and can do tons of projects. You’ll love it.

[@thomashansen871]

Next time you do sheet stainless, try clamping it to a thick piece of aluminum. It helps when welding

[@VoeltnerWoodworking]

Thanks for the tip!

[@savvybuilds]

Great vid, thanks. A laser engraver is next on my list!

[@VoeltnerWoodworking]

Thank you!

[@phoenixoneproductions]

Love this. Cause its exactly how I think but i dont know where to start selling!

[@VoeltnerWoodworking]

A great place to start is by selling to friends and family on Facebook and directly. From there they will recommend you to their friends and your network will grow. This is by far the quickest way to get more projects done and gauge what types of products will do well when you get ready to sell on Etsy or your website. Thanks for watching and welcome to the channel.

[@phoenixoneproductions]

@VoeltnerWoodworking Good tips! I have my items in a Consignment store and have set up the Etsy store but haven't started yet. Look forward to more of your content!

[@millionmilerclub]

Nice video, thank you. I am starting to play with it and hopefully can make some money at one point.

[@VoeltnerWoodworking]

Thanks so much! So many possibilities. You'll do great.

[@gugun2660]

Thank you for this, i will be buying mine in a week's time.

[@VoeltnerWoodworking]

XTool has some really great machines. I recommend also checking out the S1 which is fully enclosed. I have a few videos on my channel about that machine. Glad it helped.

[@gugun2660]

The S1 is pricy for me at this time, hopefully in the future I will be able to afford it 😀. Does it come with same workspace like the pro?

[@ChadsCustomCreations]

Great video Matt, you give lots of great information for everyone to add to their tool belts.

[@VoeltnerWoodworking]

Thanks dude! We should team up on some laser content.

[@rockroosterfootwear7713]

Rock Rooster is in the house!! Keep up the great job!!!

[@VoeltnerWoodworking]

Woohoo! Love you guys.

[@fvillarrealg]

Thanks for the information

[@VoeltnerWoodworking]

Sure thing! Glad you enjoyed.

[@LarryDMitchell]

Great video and I like your thought process. I already have a 10W laser and I'm always looking for new ideas. I just went to Makerstock and will be ordering some of the 1/8" MDF tomorrow. Looks like a good place to shop. You just earned your self a new subscriber. Now...on to some binging your channel tomorrow.

[@VoeltnerWoodworking]

Hahaha. Awesome on all accounts. Thanks dude.

[@billysmether6237]

Ikea has super cheap prices for high quality cutting boards. They have all kinds of shapes also!

[@VoeltnerWoodworking]

That’s a great idea!

[@momphard]

Great info. Thanks Matt! I'm getting a D1 as well. Looking forward to putting it to use!

[@VoeltnerWoodworking]

Thanks Dave! It’s a good laser.

[@dgperforms1]

Thanks man! Im on the fence with getting one of these. Id like to use it on my Custom Made Cigar Box Guitars as well...

[@VoeltnerWoodworking]

Now that sounds like an awesome idea!

[@Nina-2311]

Oh it would be cool for you to review the xtool m1!

[@VoeltnerWoodworking]

Thank you! It looks like a great machine.

[@baileythompson3680]

Always enjoy your videos!

[@VoeltnerWoodworking]

Glad you like them! Thanks for watching!

[@chucky.chunder]

Have you ever had to Laser engrave a Walking Cane with a badge/ logo motif as it is round and the laser would have to go round the shaft as it is circular, be interested to know.

[@RD-wh3vg]

Hi thank you for the video. I just have 1query.. I can use leather and other material with this machine as well?

[@VoeltnerWoodworking]

Yes, you can. If you click on the link in the description for the machine it will tell you the materials you can cut/engrave. Glad it was helpful.

[@marcq1588]

Thanks for the ideas... How much have you sold yourself?

[@danielhernandez7534]

Thank you for this amazing video 👏🏻 Is there a computer program that you need for this engraver?

[@VoeltnerWoodworking]

You can use their free software to do everything you need. It’s easy to use.

[@a91customs]

Good video Matt. Definitely want a laser eventually.

[@VoeltnerWoodworking]

Thanks Buzz. A great addition for the shop.

[@oldlostminer]

Nice informative video. Thanks for sharing.

[@VoeltnerWoodworking]

Thank you. Glad you enjoyed it.

[@ammoush82]

Great video! Thank you. Would you end up in a darker engraving on metal if you run the same design twice?

[@VoeltnerWoodworking]

Thanks. Yes, but each material is affected differently so it’s best to run tests.

[@JoeDavidson-gc7zo]

Hello. Joe from Missouri. The laser you’re talking about in this video? Like to know the type, & cost? I’m new to this so I don’t want to go overboard on price. I buy stuff from Hobby lobby. They’re all finished wood. Just engraved it . Especially if you don’t have a lot of tools. Have a great weekend.

[@landonseale7307]

I liked it immediately after the hay joke

[@VoeltnerWoodworking]

Haha. Dad jokes are what bring me joy.

[@johnhubbard6262]

I never met a cheap woodcutting board that didn't fall apart the first time someone put it through the dishwasher, dropped it, or just used it regularly, though I do like Acacia as as Teak substitute

[@VoeltnerWoodworking]

I make my cutting boards primarily from cherry, walnut, and maple. Can't beat a good hardwood for quality.

[@shawnwalsh3502]

I have no doubt that you are correct. Personally I would never put a wooden cutting board in a dishwasher; I just think it’s asking for trouble.

[@JEBULLC]

Thank you so much for all the informations.

[@VoeltnerWoodworking]

You are so welcome!

[@terryh5677]

Great Video brother. First time seeing your video. Subscribed now.

[@VoeltnerWoodworking]

Thank you so much! Welcome to the channel. What type of content do you typically look for in a channel?

[@msharp1519]

What settings did you use on the stainless

[@TheVineyardFarmhouse]

New subscriber, searching out makers channels, because I like to make and build stuff

[@VoeltnerWoodworking]

Awesome! Welcome. What do you make?

[@TheVineyardFarmhouse]

Well, at the moment I’m working on a two-story farmhouse. But as far as making stuff goes, it could be anything. I put a video out of making a cornhole board not too long ago. I am heavily involved in the Homesteading community although I’m not really a true Homesteader. I am a maker at heart and and that’s where I want my channels focus to be. I have most of the woodworking equipment. Next step is to buy a drill press.

[@VoeltnerWoodworking]

Sounds like you're a busy guy!

[@carolwaller9605]

lol, you’ll barely have time to make KZbin videos 😂

[@victorialyles4452]

Where can I find the cork Coasters viewed in videos at 1:24? Thanks.

[@VoeltnerWoodworking]

Here you go: amzn.to/45E0wJw

[@stockstnt8]

Like to know more about your machine , where do we get the best laser machine .. i ran and industrial lasrer burner like to get a smaller one for things like this..thanks

[@VoeltnerWoodworking]

I have a few links in the video description if you’re interested.

[@TiroTofang]

Hi. Is it possible to do checkering and engravings on gun stocks which look close to handwork? Thanks

[@davidpike1047]

Great video as always Matt.

[@VoeltnerWoodworking]

Thanks so much, David! I appreciate you.

[@ScottBGKY]

Can you use the risers to engrave things that are larger than the normal size? For example a bourbon barrel lid is 21”. Could I use this machine to engrave one?

[@VoeltnerWoodworking]

Yes, you can set it on any surface.

[@ScottBGKY]

@ So I could raise it enough to slide a 21” lid under it and still engrave it?

[@VoeltnerWoodworking]

@ScottBGKY it’s very portable so you can set it directly in a surface without issue.

[@user-nu4cr1bh7m]

Can you use this for vinyl decals?

[@VoeltnerWoodworking]

There are much better machines for vinyl at a cheaper cost if that is what you’ll be doing primarily, just to be honest.

[@tonyfreechapel]

My wife and I want to start selling items on Etsy, what are some things that we should know about this laser machine? Is there a limit to how many things we could engrave? does it last long time without breaking down

[@VoeltnerWoodworking]

I recommend checking out the xTool S1 laser for another option. It will last longer and is fully enclosed. It’s a great machine that will keep up with your needs. There’s a few videos on my channel on that machine.

[@gerGoPrint3D]

10:05 lifehack: practice rotary engraving on empty toilet paper cores and empty pringles containers...

[@VoeltnerWoodworking]

That's a fun idea!

[@johnmay371]

Great video!

[@VoeltnerWoodworking]

Thanks

[@sangetube]

Subbed. Great vid 👍

[@VoeltnerWoodworking]

Thank you so much

[@arad04]

Isn't the artificial leather is spreading toxic fumes when laser engraving? Thank you

[@VoeltnerWoodworking]

There is laser friendly leather that I use but you should always protect yourself from all fumes when engraving.

[@josephdunston9378]

I have an xTool D1 20W pro. All videos I've watched stated you needed a medium on stainless to etch, ceramark, etc. How did you get the nice color? Can you please give you laser wattage and settings to give us a ballpark place to try on our own?

[@VoeltnerWoodworking]

I ran the pizza cutter on the 20w laser at 100% power 7mm/s. It was a little too slow, so I would say around 10mm/s would be best. No marking spray required on stainless steel. If you’re wanting to do other metals you will require marking spray. Maybe I should make a dedicated video on this?

[@josephdunston9378]

@@VoeltnerWoodworking video sounds good to me! Thx for the info and the videos.

[@kplicanic]

This is great-thank you! Do you have any info on how the ventilation of the xTool works? It just..... goes everywhere in whatever space you're in? There's no body/housing to force it through a duct system of any kind?

[@VoeltnerWoodworking]

They do make an enclosure for this system which will make it better, but they just announced a new laser that is fully enclosed. I’ve been testing it for a couple of months and it is awesome. I have a video coming out soon on it: www.xtool.com/products/xtool-s1-laser-cutter?ref=FCYiXVqZuxgXT&

[@Ishiisan]

Do you have a box for ventilation?

[@VoeltnerWoodworking]

I don’t yet, but it’s on my list once I find a permanent spot.

[@cfmendez]

Great video! Can you share the name of the font you used on the sign "grateful"?

[@VoeltnerWoodworking]

Thank you. I can’t remember which one it was, but I get most of my fonts from DesignBundles.net. They have a great selection of fonts.

[@cfmendez]

@@VoeltnerWoodworking Excelent, Thanks!! Really appreciate it!

[@VoeltnerWoodworking]

Sure thing

[@anaramirez9813]

Great content

[@VoeltnerWoodworking]

Thank you so much!!

[@dewmei64]

very informative. where did you find the hold down buttons at

[@VoeltnerWoodworking]

Thank you. I have links in the video description. These are made by TwoTrees.

[@dewmei64]

thank you just starting out alot to learm 😀@@VoeltnerWoodworking

[@jamesshelton1124]

On the Tumblr when you say that all they’re doing is burning through the paint to get to the stainless steel underneath and some cases that is accurate because they’re bringing the stainless steel the light however, in some cases they are rich in the stainless steel, the same as you are without the paint Also, there are some sprays you can use when edging an area that will turn the ocean color as well. All at the same time what are you do give him permission that is excellent within this show me information is not completely accurate or was lacking the full information is necessary, keep up the good work as I do enjoy watching what you’re doing and how you’re doing it

[@VoeltnerWoodworking]

Thank you

[@AndrewLaSane]

Great video, thank you

[@VoeltnerWoodworking]

Thank you!

[@MyLegacyLaserStudio]

I just purchased the 20 W version. I was curious can I do cowhide that has little tiny hair on it? I have a potential buyer… but I need to do more research into it. Thanks for your videos

[@VoeltnerWoodworking]

I haven't tried that type of leather, and the thing I would worry about is the hair catching fire. For this type of thing a closed system like the S1 or P2 would probably be best, unless you get the enclosure and flame system for the D1. I have a hard time recommending the D1 since the newer lasers have been coming out with full enclosures at a reasonable price.

[@loyal365]

How do you get the engraving so dark and black

[@VoeltnerWoodworking]

Increase power and lower speed to get darker engraving. It’s always good to do some samples for different materials to know which settings are best for each type of material. Hope that helps. 👍

[@kathykanterman9045]

Great video! Thank you very much!!! ❤

[@VoeltnerWoodworking]

Thanks for watching!

[@RoseKindred]

This was interesting, and a nice breakdown on the machine itself. I am curious, is there a reason why you shimmed the rotatory attachment at 12:20 ? The bubble level shows the surface to be level on that metal, are the attachment wheels on an angle?

[@VoeltnerWoodworking]

Thank you! The cup was slightly angled so I shimmed it level. Good eye!

[@RoseKindred]

@@VoeltnerWoodworking Nice trick, I haven't seen that one before. Though I guess it makes sense when you think about it and I just couldn't. I commonly see people suggest 3D printing or laser-cutting rings to slide on. That way you create the same circumference on the tumbler top and bottom.

[@CarterKeinath-sv9dp]

i just recently got a laser engraver and i was wondering what program you use to engrave your projects?

[@VoeltnerWoodworking]

I primarily use Lightburn for most of my stuff, although the xTool software (XCS) is pretty good now if you use one of their machines.

[@natalieschultz6065]

Do you have a link for the magnets used to hold down your leather patch? Please and thank you!

[@VoeltnerWoodworking]

They aren’t actually magnets. They are hold downs with the Two Trees honeycomb. I have a link in the description for the Two Trees honeycomb. Hope that helps. Thanks for watching.

[@marcisnee2150]

I get a lot from Hobby Lobby...especially the rotating sign. Can't share a picture here, though 😐

[@VoeltnerWoodworking]

It’s such a great place for supplies. I spend way too much there and Michael’s. Lol.

[@mjm917]

Is there some kind of adapter to etch glass? Specifically glencairn whisky glasses

[@VoeltnerWoodworking]

The RA2 rotary works with all sorts of cylindrical objects including the oddly shaped glencairn glasses. Should work great. You’ll want to use a dark tempura paint or something as a marking agent to absorb the light.

[@mjm917]

@@VoeltnerWoodworking thanks for the quick reply.

[@terryw5500]

Do you have a fee chart on how to charge for stuff

[@VoeltnerWoodworking]

I don't because it really depends on a lot of factors. The best thing to do is compare prices among places like Etsy, FB marketplace, etc. Based on your equipment and how long it takes you to complete something you can adjust from there. If I batch produce things I will generally have those products lower than one-of-a-kind type projects and those that take a long time to complete. If your machine is slower than industry standard, unfortunately you can't charge more because it takes you longer. If a set of coasters costs $3 in materials and you can design/engrave in 30 minutes versus another machine that takes 10 minutes, you shouldn't charge more. If the average for a custom set of coasters sells for $25 on Etsy then you should charge around that price. What you lose in time, by something taking longer to complete, you pay for by learning. Think of it like paying to attend a class where you're the teacher. LOL! Next time you'll complete it a bit faster and learn better ways to do it. I hope this helps!

[@jhroche75]

What are you using for your hold down pins? Those look perfect

[@VoeltnerWoodworking]

They are from TwoTrees. I have a link to the honeycomb set in description. They work good as long as the metal doesn’t warp. Lol.

[@rmkilgorejr]

Great video! Ive watched a few of your videos now and I wanted to know if you designed your power and speed pattern or purchased from somewhere?

[@VoeltnerWoodworking]

I use Lightburn which has a built in material test feature that you can use. It's very customizable and easy to do. Perhaps I should do a video on it?

[@deannahepner9355]

@@VoeltnerWoodworkingyes please

[@VoeltnerWoodworking]

@@deannahepner9355 sure thing!

[@BillJones-m4g]

Can I cut stained glass for real glass windows or panels w lazer?

[@VoeltnerWoodworking]

Unfortunately you won’t be able to cut glass. It can only etch the glass.

[@BillJones-m4g]

@@VoeltnerWoodworking I see some UT videos that mention cutting clear glass bit it gives no detail like thickness, power speed. Brand or type of lazer Wanted more

[@VoeltnerWoodworking]

@user-be5ng6il4y a 50w CO2 laser is capable of cutting glass. I haven’t done this as I have no need for that, but if you think it would make an interesting video let me know.

[@BillJones-m4g]

@@VoeltnerWoodworking imagine needing to make multiple windows for a building with similar images, with some center image changes but majority of fill is the same. Cutting by hand would be beyond difficult, could pay for a 40 watt machine on first job compared to a commercial contract shipped from out of state! I am strongly considering getting a laser to cut and image plywood. Wonder how much more it would cost to upgrade to do limited side huddle glass cutting and etchings?

[@VoeltnerWoodworking]

I tried cutting stained glass on the P2 co2 laser and referenced your question in the video. Give it a watch if you’re interested. This is the CO2 laser to beat! My xTool P2 laser review kzbin.info/www/bejne/r4OUaKh4aq2cn68

[@PuppetWood]

such great ideas.

[@VoeltnerWoodworking]

Thank you! Glad it helped.

[@TALKATIVE_CARTOON]

Finding the xtool hard to price. Amazon Canada has it for about 1,900. Without knowing anything about the accessories or if I would need them just the accessories add up to around 2k? 4K is what I should expect to pay?

[@VoeltnerWoodworking]

I have a link in the bio of the video that should work for Canada as well. If you’re looking for the 20w, there is a bundle that includes the rotary and attachments needed. That’s a great place to start. The 20w does plenty for most people and you can upgrade the module to 40w or IR module easily in the future if you need. www.xtool.com/?ref=FCYiXVqZuxgXT&

[@VoeltnerWoodworking]

Updated Canada xTool link: ca.xtool.com/products/xtool-s1-laser-cutter

[@TheStandUnited]

Can you share the settings for the pizza spatula thing? Was it a 20w diode?

[@VoeltnerWoodworking]

Yes, this was a 20w diode from xTool. I'll have to look for the settings for this one, but best thing to do is get a second piece of similar material and run some material tests. I usually run material tests and keep them for future reference.

[@sellarsr123]

What type of machine do you recommend buying

[@VoeltnerWoodworking]

Check out this machine. Highly recommend. xTool S1 40w laser kzbin.info/www/bejne/q2nSqoeih9GAd7M

[@davidrowe1254]

How do you deal with that is created by the laser? I notice that you are cutting without any enclosure in the middle of your shop. My shop is a attached garage below my dining room so the smell would go right upstairs.

[@VoeltnerWoodworking]

There is an enclosure you can buy with exhaust port for ventilation. I highly recommend that for any laser. I have a detached garage and since I do videos I leave mine open for now.

[@bearsstuff]

You can't do stainless steel with a C02 can you? I was surprised to see you could do it with a diode. I thought you had to have a Fiber to do metal.

[@VoeltnerWoodworking]

It works well on a diode. Either diode or fiber will work.

[@coreydavoll7622]

Very cool!!

[@VoeltnerWoodworking]

Thanks dude!

[@joshuahounds]

When you do customized products on Etsy do you set specific parameters that customers can choose from when it comes customization or do you let them send you whatever they want it to look like?

[@VoeltnerWoodworking]

Most customizations are done through my website. I find Etsy more difficult for things like that because there is a lot of back and forth for customization. Etsy has a metric for response time and I am not a huge fan of that for customization.

[@cedarandsound]

The problem with some projects that people intend to sell is that the Etsy market is flooded with too many, and at really low prices too. Best to try and sell local, or at least do something unique with the project.

[@VoeltnerWoodworking]

Yeah, good photos/video on Etsy along with personalization is a must to be successful there. I like to sell locally and on my website for most profitability.

[@ArgentumSphinx]

What about the fumes?

[@VoeltnerWoodworking]

If you’re working in an open space it’s not terrible, but they do make a cover for it. I didn’t use the cover for this video because it doesn’t make for great video content but would help eliminate fumes.

[@wfd805]

I have to ask, is this engraving the stainless or etching it? I have a project that will require real engraving with enough depth to add epoxy into it for a desired look. I had a local guy say he could engrave it and it was just etched.

[@VoeltnerWoodworking]

It's just etching. It won't be deep enough to hold epoxy.

[@taicronck9559]

Thank you

[@VoeltnerWoodworking]

You're welcome!

[@bowstobourbon]

would you still go for the d1 pro to start or the s1, currently i dont have an outdoor place with power

[@VoeltnerWoodworking]

If you can afford the S1 I would recommend that 100% mostly because of the safety and ease of use. The additional features like curved surfaces and conveyor attachments are great too.

[@bowstobourbon]

@@VoeltnerWoodworking thanks again!

[@kerrysnyder7731]

Can you tell me what machine you are using

[@VoeltnerWoodworking]

Sure thing. There’s links in the description, but here it is: shorturl.at/tJNV8 (Code: VW10)

[@johnmay371]

Super informative

[@VoeltnerWoodworking]

Thank you

[@crafteesoul7336]

I just received my first ever laser so have much to learn! Thank you for the information! Is it rude to ask how you etched the edge of the cutting board with the xtool d1 pro? I have the 20w and cannot figure out how to make it tall enough to etch the edge. Thank you in advance.

[@VoeltnerWoodworking]

Do you have the risers for it? You could always use 3 of the risers and shim up the remaining corner to make the machine level.

[@crafteesoul7336]

@@VoeltnerWoodworking I have the 8 extra riser pieces. Your way is genius! Thank you!!!!! And thank you for taking the time to respond. 🙂

[@VoeltnerWoodworking]

Absolutely! I always respond to kind comments. :)