Voge 900 DSX Handle bar modification

Hi guys, Finally got around to fitting bar raisers up and backwards to the Voge. It makes a huge difference on the stance of the bike i advise rolling the bars forward and adusting the mirrors, brake and clutch lever after fitting. the parts are from Aliexpress link below. parts for BMW f850GS. i re jigged the bars after a test ride hence the addition at the end. Ride safe guys.
Just found this amazing item on AliExpress. Check it out!
17,97€ | Handlebar Riser Clamp Back Move Mount For BMW F900R F900XR F900 R XR Motorcycle Accessories F850GS F 850 GS Adventure ADV
a.aliexpress.c...

[@motechRevolution]

It rides and handles superbly. I think the points I mentioned in an earlier video will iron themselves out with a map update and running in. Thanks for commenting ✌🏻

[@quickjan]

Hi Paul, thanks a lot for your video, I follow them as they come, so keep them coming :). My DSX will come in September maybe, but I already ordered parts as you recommended - risers and engine covers 🙃

[@MrPriba91]

Hey, just wanna share with you how lucky I was when I ordered my dsx. In dealership they told me that first available bike will be at the end of the year, and while I was there someone canceled his order, so I took it. That was last week and I'm expecting my bike tomorrow XD

[@christopherlynch235]

Great video,thanks for the updates on your experience with this new model.Superbly informative and insightful. Great bike at an excellent price point.Unreal.

[@ivanrushtonthelonewolfrides]

Great Video mate im thinking of putting some on my CF Moto MT800 Explore as you just need to crouch when standing

[@motechRevolution]

Had the same experience on the Voge, I was hunched over standing.

[@alenfora1400]

So are you happy with your bike and much kilometers so far

[@tamaskumanovich502]

Hello, when turning, the clutch cable is slightly stretched. Not for you? Thanks!

[@motechRevolution]

Mine is fine, if you have installed bar raisers you need to cut all the zip ties and move the cables so there is more play then replace the zip ties

[@jmvicentemendes]

Is 30mm the maximum for the cables to have a good clearance /slack or, can we buy for example a riser with 55mm?

[@motechRevolution]

I'm not 100% certain but if you unclip the cables further down maybe, it might involve removing the tank though.

[@TAZZZBOY]

You are riding it on the softest set-up on front? It is too Soft for me, I have hardened it on 2 lines

[@motechRevolution]

Yes I've softened mine up purely for our local roads they are brutal. Main highways and A roads are good, not a route I would have gone down on my super sports bikes of the past. But needs must especially with the wife on the back 😁

[@Pacollons86]

Hola Paul, son de fiar los tornillos qué traen las alzas o mejor sustituirlos? Y a que par de apriete los montaste? Gracias

[@motechRevolution]

Son de buena calidad, utiliza los que vienen con las bandas ya que no agarran el manillar. Utilice los pernos originales en las secciones superiores del manillar original. apriete a un par de 10 nm

[@Pacollons86]

@@motechRevolution Muchas gracias por contestar y por los videos Paul. A disfrutar de nuestra Voge 900DSX

[@Pacollons86]

Paul, hemos revisado el manual y dice que el apriete del manillar va a 24 N , por si quieres repasarlo. Me enviaron en el grupo de Telegram. Saludos

[@filipedl251]

Hello I have just a question, what do you think about the material quality of these risers. Thank you so much Filipe from France

[@motechRevolution]

They seem good quality Aluminium not sure what grade, but the threads were good and didn't feel soft like some I had in the past, no bad feeling when torquing up. Although they are under €20 on AliExpress they don't look cheap and also look very clean on the bike. I would recommend them

[@filipedl251]

@@motechRevolution ok thank you for your response

[@Carlosguca539]

Many thanks and congrats for your video. I got mine 2 weeks ago, and was thinking about fitting the handlebars raiser. After watching your video, I am now less afraid to do it on my own. I did not get what you mentioned about the headstock and which cable to cut. If you wish to have a ride around Alicante please let me know.

[@manosde]

Running hot with that compression ratio is normal I guess

[@motechRevolution]

Yes, most definitely the reason. ✌🏻

[@jerzykorol6785]

Hi, how tall are You? 👍👍👍👍👍👍

[@motechRevolution]

Hi I’m 5’10” or 178cm

[@bobanppvc]

To small for me im 197...Even if i get seat and bars higher tft is too low...

[@motechRevolution]

The seat has a very low dip, word is Voge are bringing out much higher seat options.

[@bobanppvc]

@@motechRevolution even with higher seat tft stays low and you need taller handlebars...

[@motechRevolution]

I've put lifters on mine but if you wanted more aggressive handle bars you could always put some Renthal bars on it. Although last time I took mine on a trail standing up it was fine.