Since you guys are on a mkV streak can you do a diy on the fsi timing belt replacement?
@jamesk35653 жыл бұрын
If only the 2.5 was this easy lmao
@Ridestereo765 Жыл бұрын
Was able i get 2 out of 3 bolts out, bottom right one loves to strip more than a female 😂
@singhsarabjit9 ай бұрын
Hello sir, Brake Vacuum is not sliding in all the way? I tried all directions. What should I do? Thank you
@fcpeuro9 ай бұрын
Be sure to align the shaft properly, and ensure no debris or anything got on the sealing surface of the block and pump.
@singhsarabjit9 ай бұрын
@@fcpeuroThank you very much!!!
@ampur883 жыл бұрын
This man is incredibly clear and detailed. THANK you for a straightforward and thorough procedure! :) Super valuable.
@fcpeuro3 жыл бұрын
Nathan's definitely valuable to the team! Thanks for watching!
@hectorbiarnes88383 жыл бұрын
Thanks for video! Please continue to post up MK5 content!!
@fcpeuro3 жыл бұрын
We certainly will! Thanks for watching!
@asherkimball83493 ай бұрын
I hear a rattling noise from my brake booster, any idea what that could be? I replaced it some time ago
@fcpeuro3 ай бұрын
A good start is checking all the hardware to make sure its secured!
@chinconcuac2003 Жыл бұрын
Hello , I want change only gasket in my vacuum pump is ( 06D 145 100E ) This number is 06D145117A compatibly in my vacuum ? Thanks
@natemiller2587 Жыл бұрын
Great video- on my Eos, the lower bolt also holds the bracket with the retaining clip for that wiring loom. There’s a ground wire attached to the bracket as well. That bolt is a wide washer head, rather than the pan head bolts that are up top- very different in appearance. Everybody says the lower bolt is tough to see- I spent 5 minutes looking past this one, trying to find one that matched the others! Once I removed the bracket, it all came open easily. Thanks for the great video.
@igalalon31052 жыл бұрын
Hi, how can I diagnose a faulty/wear pump except the oil leaks ?
@keanufarias10302 жыл бұрын
That’s my CAR !!! I need a ton of help 🙏🏼🙏🏼
@Jeroen68 Жыл бұрын
I have a p0171 bank 1 too lean code. And this pump is pretty oily could this cause the vacuum leak?
@christianreyes4874 Жыл бұрын
You fix it?
@scottbeeton274711 ай бұрын
Check pipes going into the vacuum pump, had the same fault and one of those pipes were cracked and leaking, noticed a drop in power.
@Jeroen6811 ай бұрын
@@christianreyes4874 yes it was the pcv valve
@Jeroen6811 ай бұрын
@@scottbeeton2747 thanks i fixed it already it was the pcv valve
@kayleighfrancisco7213 жыл бұрын
Here's a list that helped me out. "whinyl.com/bvp-guide/ In the end, I went with #10. 5:30