Volkswagen Jetta 2019 and up | Radio Removal

Link to the parts used in this video shop.enfigcars...

[@sa5629]

Can’t wait for a speaker upgrade video!!

[@Enfig]

Me neither. I'm still looking for a car.

[@vintagetweed]

Great vid. Helped a lot and I’m a professional installer! Props for keeping your vids real and showing the whole process even if it’s not smooth!

[@Enfig]

Thanks man. I try not to make things look easier than they are.

[@brianmac4624]

VERY helpful! Be sure and use the plastic tools (I got them for $6 on Amazon). Be CAREFUL with panel #3 (the first panel he removes after moving the camera to the passenger side). I believe that one is the most difficult. I broke one T and two of the three shorter plastic clips. Look at the direction of the clips after he removes each panel. Also, be sure to pay attention to both his hands b/c sometimes he twists the panel but it isn't obvious b/c he's very good at it.

[@Enfig]

I don't sell my tools on amazon. 😂😂😂 Good advice. I sometimes do things without thinking about them.

[@boknowles6660]

I can not get that silver piece off to save my life.

[@boknowles5450]

I can not get this panel off without breaking the clips.

[@boknowles5450]

OK, job is complete. Like you, I broke 2 T getting it off. It was so type the broken piece was still inside the car. I had to use vise grips to get it out. I used a two part poxy to put them back on. The silver panel went on fine. Not as easy as the video for sure. Does make a big difference in sound though

[@Enfig]

I'll see if I can reshoot that part next time I do an install in that car to help other people.

[@toshirohitsugaya2]

Thanks to this tutorial I was able to spruce up the dash a little bit by adding some vinyl wrap to the shiny black parts didn't have enough guts to do the radio though!

[@Enfig]

Nice!

[@teetexas91]

Thank you we are painting the dash and didn’t know where to start. Not a lot videos o. The new jettas

[@Enfig]

You're welcome.

[@sa5629]

thank you for being the first to do this!!

[@Enfig]

Thanks for watching!

[@darrengilbert8467]

I'm having a lot of trouble taking off the long silver piece on the passenger side. It looks like the little clips on the top are undone but it's not popping out at all. It's still very tight

[@Enfig]

It might help if the car is very warm. Plastic is softer whenit is warm.

[@boknowles5450]

Were you able to get this piece off? If so, how?

[@acf142]

Hey man nice video I just got my 19 R-line 4 months ago. Im looking to upgrade the stereo

[@Enfig]

The amp is available. There is no dash kit for this car yet.

[@sa5629]

watched till the end btw!

[@Enfig]

I appreciate that!

[@sa5629]

any update on when the speaker upgrade vid is coming? I’m having my car done at the end of the month and I’d love to see your video as a reference since the car is so new

[@Enfig]

I haven't even tried to take off the doors yet. It really just depends on how busy I am during each week.

[@sa5629]

Enfig ah no worries. will be looking forward to when you get a chance to take the doors off

[@Enfig]

Pat hasn't worked here in almost a year and I haven't had another customer that wanted speakers.

[@christophertancrell6217]

Man, I don't know how you popped those panels off so easily. I bought your guy's amplifier kit and tool set and am in the middle of working the project now... I nearly snapped the bone tool trying to get the long silver piece off and I broke 3 of its clips while doing it! They sure didn't make it easy to disassemble. I just couldn't seem to get the same leverage that you did...the panel (or tool) would just bend regardless of where I put the tool. Any recommendations?

[@christophertancrell6217]

Update: project finished. The rest of the process went very well with no further broken pieces. I used 2-part epoxy for plastic to fix the trim pieces and they went on just fine. Man, installing that amplifier makes a neck of a difference! Thanks for the videos and products!

[@Enfig]

Is it possible that you were working outside and the plastic was very cold? Heat always helps.

[@boknowles5450]

@@Enfig I am in the middle of this project and can not get the silver piece off. Has anyone got it off without breaking the clips?

[@boknowles5450]

@@christophertancrell6217 I broke same pieces as you did. Also used 2-part eproxy to fix and all went on fine. I do not see how you could get that thing off without breaking.

[@jessenunez622]

I just bought me the 2019 Jetta and its in need of a sound upgrade and i never keep my car audio stock.

[@Enfig]

If you are close and need help let us know.

[@shaagealgareb9189]

thank youuuuuu so much

[@Enfig]

You're welcome.

[@ericlondono4251]

Thanks for the video

[@Enfig]

You're welcome.

[@easycomeeasygo8901]

Thanks this was a big help. Adding a amp line out, can i use same color wires for left right as the last gen jetta? Purple and green for speakers ( pos side ) red 12v brown ground. Still same?

[@Enfig]

I would recommend getting our break out harness for an amp. But do not power an amp off the radio harness. We do with a pioneer amp but its draws little power. enfigcarstereo.com/ENFIG_AAI4_VW16.html

[@leandrodesouza1647]

Obrigado pela ajuda amigo!

[@Enfig]

Google Translate: Thanks for the help friend! You are welcome. Google Translate: Você é bem vindo.

[@leandrodesouza1647]

@@Enfig i'm from brazil, i'm new in this area, follow me on Instagram @chicosfilm_, I've won one more subscriber

[@giohec1998]

I’m currently installing this upgrade on my Jetta r line but I’m really having trouble removing the long silver panel. I purchased all the tools you used in the video but I’m still struggling with that one long panel. I’m in Florida so the cold is not an issue. Any recommendations?

[@Enfig]

Sorry we get swamped during the holidays so I can't keep up with everything. I hope you figured it out.

[@luker.9098]

Can you post a video on how to remove the door panels please I’ve looked everywhere

[@Enfig]

I'm dying to do that video I just haven't found a local car that needs speakers. I even have the speaker adapters.

[@kalebkruegerkk]

Any idea where to find better wire diagrams for the 2019 jetta gli trying not to have to access the back of the radio

[@Enfig]

Unfortunately VW has become very secretive with their diagrams in the last few years. New cars don't even come with fuse box diagrams anymore.

[@timk8021]

Is there an adapter for the usb that allows to come out of an aftermarket head unit and attach to the factory usb connector?

[@Enfig]

I don't really understand your question. But I think you are asking if there is an adapter to use the factory USB with an aftermarket radio. But since there are car functions on that radio there is currently no way to replace it.

[@Blqman989]

Hello, wanted to know how I can upgrade my factory 2019 Jetta stereo to factory navigation stereo?

[@Enfig]

I would not know sorry.

[@taylorhollifield8630]

I've been waiting for this! Thank you so much

[@Enfig]

So have I 😂😂😂. It finally didn't rain this time.

[@ffd85]

Do u have a video of how to remove the central air vents?

[@Enfig]

No we have never had to take those out for anything.

[@warachito]

what happens if i have interior lights that goes on the dashboard

[@Enfig]

I have never seen that car before.

[@GavenEdmonds]

Do you provide removal tools to help with the installment and does this upgrade work on the R-line?

[@Enfig]

If you are talking about our amplifier upgrade it works on all cars that do not have beats audio. The removal tools can be found on our web site. enfigcarstereo.com/ENFIG_RRK4_RADIO_REMOVAL_TOOLS_KEYS.html

[@joeylantis22]

Hey is that a CD player at the bottom of the radio? Or is that the little bar that senses when your hand moves close.

[@Enfig]

That's a slot for an SD card.

[@joeylantis22]

Is there no SD card area in the glovebox, @@Enfig? Thanks for the reply.

[@jaminx2]

Some newer VWs do not have any stereo components in the glovebox. My VW does not have a CD player either. It has a SD slot, Apple car play, Android auto, mirror link and just plain Bluetooth.

[@alexitoe30]

can you add the bigger head unit from an autobahn into this model

[@Enfig]

I do not know.

[@falieresabdallah2005]

Where can i order the blue panel kit and radio key remover?

[@Enfig]

I have just added them to the description but here are the links. Keys to remove the radio enfigcarstereo.com/ENFIG_RRK4_RADIO_REMOVAL_TOOLS_KEYS.html Panel Pry tools enfigcarstereo.com/ENFIG_PPT_12345.html

[@c6262708]

Anyone have any ideas on how to add an aux input ?

[@Enfig]

There are a few USB to aux adapters floating around. If you still haven't found a solution let me know.

[@gregtrinks9824]

Is the 2019 Passat any different

[@Enfig]

I think they have different radios. Probably a completely different process.

[@andaspeyo]

hi.. men . What brand is the stereo?

[@Enfig]

Sorry I do not remember.

[@TheCOQuinn]

Any idea if I can do the same process on a MK7 GLI with ambient lighting? I would hate to pop the trim off and damage the LEDS.

[@Enfig]

I haven't seen a Jetta that has the radio in the glove box. It should be behind the dash.

[@KINGKJ2REAL]

I wish you would have fucking said you need special tools before the video started

[@Enfig]

Thanks for the feedback. I have added links to the needed tools in the descriptions of the video.