Volvo S70 T5 V70 Front BUMPER Easy Removal Install

Volvo S70 T5 V70 Front BUMPER Easy Removal Install. In this episode I remove and install the S70 T5 Front Bumper. Someone smashed into my Volvo S70 damaging the passenger side front. So while I'm repairing and replacing parts here's a look at DIY bumper removal. Installation applies to all 1998, 1999, 2000 Volvo S70 T5, GLT, V70 models, and the 850 series Volvo sedans are very similar.
Did you like this video? Subscribe: kzbin.info?sub_confi...

[@donmoore7785]

Interesting. I tried to get my bumper cover off a few years ago, and removed the rivets on the ends, and the 10 torx screws that hold the cover to the bumper support. I could not release the cover from the bumper support in the center and was planning to cut the three 1" wide plastic tabs. I never did and the car has sat unused. I was unaware of the two long bolts. Now that I look back at the Volvo R&R procedure, I see the two bolts shown but they must have thought it was obvious and the was no instruction to remove them. And in the parts diagram, these bolts (item 10) are shown above the bumper, not below - so it wasn't clear they even exist. Doh! Thanks. You are the only one who has posted anything on this for the S70.

[@keithhiggins8610]

Thanks for the help. I’ll be removing my bumper tomorrow to paint it . 1998 s70

[@mancavecustoms13]

This actually just helped my for my V70 engine swap! Thanks!

[@zulmishat2568]

Thanks so much for this , will help me with mine.

[@natecorbett3235]

Thank you i was thinking about taking my bumper and fenders off and painting them or jus leavin my bumper off i appreciate the help

[@DonWSquared]

Glad I could help

[@marianmoncifoda7657]

That was helpful. Thanks!

[@CG45B]

I like this videos you make. Very helpful. Cheers (from Sweden)

[@DonWSquared]

Thanks for watching!

[@isend2c]

Do you still have the egg crate grill? I'm needing one!

[@swedishtuners6518]

Where and how much was the bumper paint done for

[@yinde5902]

Thank you.

[@DonWSquared]

Glad I could help.

[@OutdoorBoys100]

Those rivets that hold the bumper to the fender liner, were they reusable or did u need new ones when u went to install the new bumper. Thanks for the vid !

[@DonWSquared]

I needed new ones and went with Volvo similar rivets on eBay, link: www.ebay.com/itm/254260128708 and the Volvo part numbers would be 979878, 6848382, 981863. I hope that helps, and thanks for watching!

[@OutdoorBoys100]

Sure does gonna order me 10 just Incase hahah. Appreciate the help!