Volvo V40 seat heater repair

Рет қаралды 10,797

Garage Productions

Күн бұрын

Пікірлер: 19

@hvb9792 2 жыл бұрын

Zelf mijn Stoelverwarming vervangen door deze video👍

@markuskauranen7198 Жыл бұрын

I've changed my seatheater on the base without removing the seat out of the car, very simple process. Don't even need to remove the sidecover at all.

@garageproductions359 Жыл бұрын

Would have been nice to know how to do it. My thing was, I did actually know how this seat was built together and how to dissassamble.

@markuskauranen7198 Жыл бұрын

@@garageproductions359 I just pushed down the base on both sides to release the 2x lists and the same in front, lifted up the seat with the adjuster and pulled back on the base to release the list on the bottom of the base, disconnected the connector to the heating element from the module and the base was off. I also used steam to loosen the glue of the heating element so that the base was whole with out any missing foam at all, then replaced the heating element and used zipties to put everything together, installation in the car was just to connect the elementconnector to the module and press down on the sides to get the lists in place and the same in front, and then pull the backside to the bottom. My first job was actually as an teamleader for manufacturing seats for Saab so, yes old memories indeed. :) But thanks for your video, helped me alot. Just didn't want to remove the seat altogether when the only issue was in the base.

@goproev3941 Жыл бұрын

Is it necessary to disconnect the negative terminal from the battery if you remove the seat base only out of the car without removing the whole seat out of the car? (V40 d2 2015). Great video, will give it a try soon.

@markuskauranen7198 Жыл бұрын

@@goproev3941 hi, there is no need since it doesn’t affect the airbag at all.

@goproev3941 Жыл бұрын

Thank you!