Volvo V70 MK2 Complete Headlight Replacement - How To Remove Lights and Front Bumper 00-07 V70 YES

[@warrenlewis7726]

You stay very calm.... By 5 minutes, I've snapped every plastic component I came across 🤪 great vid tho 👍🏼

[@IAMASPANNER]

Well, fortunately, if I have a moment or I trap my finger in something I can leave those bits of video out 😂

[@herkko61]

Really nice tutorial, thank you! So, the dipped beam (low beam) bulb is H7 and the main beam (high beam) bulb is H9.

[@juhansuits6555]

Thanks for the vid! Kinda surprised you kept the old bulbs. I would sure have installed brand new ones while I'm at it, as these buggers are a massive bear to change if they let go.

[@IAMASPANNER]

You’re welcome Juhan, thanks for taking the time to comment! I don’t mind changing the bulbs on this car, I guess I’ve had a lot of practice over the years. They still haven’t gone since I changed the headlights over so they must’ve been in good condition at the time of the video.

[@Firebobby927]

Brilliant video and well put together. I have a 2006 one needs the same for test. Fantastic!

[@terrydonegan1622]

Had fun today changing brake light bulbs in my v70 xc....,fun indeed

[@mikaeljonsson4686]

Thx for a really informative and straight forward video! Came in handy as the ballast for my left xenon headlight crapped out because of moisture inside....

[@IAMASPANNER]

Glad to help Mikael, you’re welcome!

[@casperhetspookje513]

Thanks, great video. I have the 2007 XC70 and it has the same hopeless design. When I replace a defective DIM light bulb without removing the whole unit, I use a piece of PVC pipe to place the lamp with a mirror. You have to have a lot of patience, but I do it again and again.

[@IAMASPANNER]

I find the dipped beams difficult to line up and have quite often put them in wrong but have changed them so much can do it by feel.

[@Themadscientist1969]

Noticed how very similar the V70 is to my XC70 model!!! thank you!

[@jrgordon47]

Funny you should say that...Volvo made 460,000 vehicles in 2004...I have one...But I can tell you that there are a total of 459,999 more that are totally different. They must make their cars like a Chinese menu......🖖

[@graemebrown1191]

Me to. I'm looking to upgrade my 05 xc70 lights to these

[@jrgordon47]

One thing I did do was drill a hole in the side skirt covering the hidden 10mm bolt, upon reinstall I covered the hole with foil duct tape. I have big hands and have a tough time replacing my turn signal lamps...so now I'll just remove the Headlight......🖖

[@IAMASPANNER]

That’s a great idea, it is quite tight, I’ve often had the dipped beam bulbs go in wonky because access is difficult.

[@kjellsundin5486]

How did you keep the light beam adjustment? Or you drove to a service shop to get a headlight adjustment after this.

[@moulder6040]

Excellent quality. Necessary to remove all that just to replace sidelight bulb? 2007 V70. Thanks. 😊

[@simonrrider]

You didn't need to do all that. I had exactly the same problem and made the lights like new with a simple sanding/polishing kit!

[@terrydonegan1622]

Peek polish and a tea towel works great for me

[@cazzie59]

Thanks for the demo, .... what a palaver just to change the headlights.

[@IAMASPANNER]

Tell me about it, look up how easy it is on the XC90, C30, S40 and V50!

[@raiderman28]

great job. It sucks when aftermarket stuff doesn't fit exactly like the originals. Usually have same issues with fenders

[@IAMASPANNER]

Yes it's annoyed me quite a lot, yes they were half the price but don't expect to see noticeable gaps like it has now!

[@2ManyJALS]

Anyway you could increase sound? Very helpful video but difficult to hear even with volume up on device and youtube. Thanks.

[@IAMASPANNER]

I can’t do anything now, it’s my mistake when editing I didn’t know how to balance the sound out before. Glad it helped otherwise though!

[@jspaulding4106]

If anyone else has this issue, try turning the closed captioning on. Doesn't make it louder 😉, but you can see most of the words...

[@peterscotney1]

Brilliant vid tolly! Most informative indeed ! ....cheers mate

[@IAMASPANNER]

Thanks Peter, much appreciated!

[@bonesofsteel7162]

@@IAMASPANNER Which year model ? 🙂

[@IAMASPANNER]

@@bonesofsteel7162 Mine is a 2004 caught in the middle of a facelift so it doesn't have the chrome trim you see in 2005. Although my car was originally sold in Germany in October 2004 before it was registered in the U.K. a few months later.

[@denisvic6768]

How to remove the side marker? I just have to change this lamp, but do i have to turn? Or just to pull?

[@julias-shed]

Thanks for this just changed a dipped beam

[@zulualpha4603]

Hi just wondering i am on the market for a station wagon and I am caught between getting a Passat b6 2L diesel auto up to 2010 or getting a Volvo v70 2.5 diesel D5 automatic up to 2007, what do u think, thanks

[@IAMASPANNER]

I’ve had a 2007 2.0TDI 170bhp Passat B6 saloon and loved it at the time but I didn’t know about the oil pump recall and my engine seized. Personally it would be the V70 for me but that’s more because of my experience with mine now having 298k on the clock and I’ve not had any issues that weren’t my fault in 66k miles. The Passat has an electric parking brake whereas the V70 has a hand brake which is pretty useless if you live somewhere hilly (like any drum in disc parking brake). If there’s anything specific between the 2 you’d like my opinion on just ask.

[@zulualpha4603]

Tolly Swift thanks for that, just found out that some v70 come as a 7 seater as well

[@IAMASPANNER]

Yes, not so sure how I’d feel about using the backwards seats but I guess the odd time wouldn’t be so bad. You can also get 7 seats in the E class estate of that era.

[@peterscotney1]

Go for the v70 mate

[@Saundersstrong]

thanks for the video , im changing out my siren module and heard there was a better way to do it , taking out the head lamp seems to be a simple approach. looks like you have a big lump on your hand did you hurt it ??

[@IAMASPANNER]

Hi Ben, thank you I’m glad to help. I’ve actually just posted a video about my hand the other day, it’s a ganglion cyst where the fluid has escaped from the joint.

[@MRTHC67]

Hi Tolly Swift. As usual clear practical in explanation and extremely useful advice. One question: I had a small accident breaking the bumper and the water tank. Is it the only way, to remove the bumper, to be able to replace the water tank? Thanks for your help. Alexander

[@IAMASPANNER]

Hi Alexander, yes you need to remove the bumper to replace the water tank if by the water tank you mean the windscreen washer reservoir.

[@MRTHC67]

@@IAMASPANNER thank you.Tolly. Yes i mean the windsreen washer reservoir.

[@MRTHC67]

I've done the job. In reality wasn't broke the windsreen washer reservoir but there was a loose tube. I didn't have to replace the water tank si was more Easy. Thamk you Tolly. I would have liked to have been able to help you with some small funding but at the moment I am unemployed. I'm waiting for better times.. Ciao

[@IAMASPANNER]

@@MRTHC67 that’s very kind but not necessary, I’m more than happy to see people save money and help themselves. Glad you got sorted!

[@timven8402]

Thanks mate! Nice video! What I was wondering was that u used the old bulbs....and u didnt put led bulbs to side light and parking light....those bulbs specially dont last long time...🤔

[@IAMASPANNER]

Hi Tim, I’ve actually only had 1 side marker blow in 5 years and the sidelights are easy to get to anyway but you’re right it would’ve been best to change the bulbs out for new while you’re at it. I’ve grown tired of LED bulbs, they cause more issues than they’re worth and it’s really hard to get quality ones even branded. Thanks for the comment!

[@timven8402]

@@IAMASPANNER I see, how do u get easily to side lights? What about parking lamps? As Volvo is a very reasonable manufacturer I cant understand why they made the bulb change such a mess....I changed xenon bulbs without taking the bumper off and it took hours. Of course I was checking this and that while doing it but had to use mirtor and rip off air filter and boxes etc...terrible job anyway....in one video somebody does that with one hand holding camera in other hand. I couldnt do like that😁

[@mikebroughton8644]

Do you have a video about how to change out a wiring harness for the low-beam? I was looking through your extensive library but didn't see anything. I have a passenger side low beam that won't work. Bulb replaced, no luck.

[@IAMASPANNER]

Hi Mike, I don’t have a video for it but I can tell you it’ll most likely be the headlight switch inside the car. My car did this a few years back and one on my dipped beams is wired into my sidelights.

[@davidpedder9048]

So happy I have the newer 2011 S80. Lights are held in place be two sliding pins. Much easier !!!!!

[@IAMASPANNER]

Same on the XC90 and C30 at least, probably the later V70 too if the S80 has them. Fortunately you don’t have to remove the assemblies to change the bulbs on the P2, awkward though!

[@croooaaalagraula]

Thx for sharing the how-to remove bumper and replace headlights... my old 2006 V70 get the same bad look and this is causing a problem at night where the lighting is not that good enough. What is your experience with these aftermarket ones after some time ? We see you struggle with some unexpected space between the new fitting and the bumper, is it due to their different shape ?

[@IAMASPANNER]

You’re very welcome! These lights I have I don’t think they’re very bright but I may be used to BMW HID lights being so much better. I think if I changed them again on the V70 I’d go for aftermarket projectors instead of standard ones. I think the fitment was terrible because they’re a cheap copy.

[@fabianhenrich4697]

Did you tried to not only polish the headlight but also to sand it down with wet sandpaper and clear coat it after that to seal it?

[@IAMASPANNER]

In all honesty I was taking the easy option replacing them. I had polished them before but not clear lacquered. The car deserves the love but I wish I’d bought genuine ones, I don’t think they illuminate the road properly these ones.

[@jorgeomarfarias4850]

Excelente video muy explicativo, pero en inglés, en mí caso y creo que de muchos no comprendemos ese idioma, sería fantástico que los subtitules en español, puede ser factible? Desde ya muchísimas gracias, un saludo cordial desde Argentina.

[@L3nny666]

how did they become so foggy in the first place? arfen't they made out of glass?

[@IAMASPANNER]

The facelift version are plastic unfortunately!

[@Colin623]

Thanks for the excellent video and headlight change, lovely clear images, you must be using a decent camera ? I have the same car and need to replace the H7 bulbs and sidelights, and I'm sure you know just how difficult that is without dropping the bumper ! so will be doing it soon, my headlight lens are a bit cloudy too, but I won't be spending that amount of money to clear them, have watched a few videos on YT how to do it, though a bit tedious looking.

[@IAMASPANNER]

Thanks Colin, I think I was using an iPhone 11 at the time which recorded in 1080p. My current videos are 4K. If I recall correctly one side of the car is easier than the other to change bulbs, you can change the bulbs without removing the assemblies but it is fiddly and I’ve often not got the headlight bulbs fitted straight. I did polish the lenses 3 times before replacing them but I never lacquered them which may be why they didn’t last. They were close to failing the MOT so I just replaced them this time as I don’t have the patience many others are blessed with.

[@Colin623]

@@IAMASPANNER Hi Tolly, yes changing bulbs is a nightmare, the passenger side (UK) model isn't too bad as it's simply a job of removing the airbox which allows easy access, but the offside is a nightmare, because of an electronic box of some sort which just makes it almost impossible to get access to the bulb with any control over what you can do ! But the side light needs changing too, and they are even more tricky to get out ! So overall it will save a lot of stress by dropping the bumper ! So thanks once again, done it before, but needed a refresher to remind me how to do it 😊

[@Ilmars_Dzigurs]

How does new TYC headlamps looks after all these months, like brand new or already wisible some damage to reflector ore lense?

[@IAMASPANNER]

I’ve only done around 3500 miles so far and they still look fine, no issues, I do believe they’re a slightly different shape to genuine ones though but genuine were double the price.

[@seantudi]

S60 2006, same headlights??? Where do you buy???

[@IAMASPANNER]

Yes they’re the same. I bought mine from Prasco and they were about half the price of genuine ones but they don’t fit that great, there’s a gap underneath them.

[@nikosuoa]

Thanks for the video! How much risk you think there is for some of the plastic bits breaking?

[@IAMASPANNER]

The only bits I had break were removing the side marker by twisting the wrong way, damaging the tab you use to remove, and the sort of guide tunnels that lead to the manual adjustment. So neither of these things are much of an issue. The plastic was very brittle even though temperatures pretty high so I'm putting it down to age of the car (approximately 16 years old).

[@terrydonegan1622]

Peek polish and a tea towel would de fog the head lights no problem. 10 minutes all done

[@gheorghinacov6008]

Valeo headlights are exactly as the OEM ones. TYC a little cheaper but as well less quality.

[@IAMASPANNER]

I couldn’t justify double the price unfortunately. I never know when the V70 might decide it doesn’t want to go on any longer. Currently at 314k.

[@gheorghinacov6008]

@@IAMASPANNER By the way I still can’t wait for the coolant change video on Euro 4 D5😁

[@IAMASPANNER]

@@gheorghinacov6008 😂 I’ll see what I can do, the coolant is pretty good on my car but if I run out of jobs I’ll get a video done for you.

[@burghysingson2056]

Hi Colin! Is this headlamp will fit in my 2002 V70? Thanks!

[@IAMASPANNER]

Yes, it’s just the earlier headlamps have glass lenses and not plastic. 👍

[@chongomcsenditdluxe8960]

Thanks for this video, don’t know why Volvo made this so complicated I should have stuck with BMWs

[@IAMASPANNER]

You’re welcome, glad to help. They’re not all this bad and some jobs are much easier on Volvos and some are easier on BMWs. The later Volvos and the XC90 it’s just 2 pins to remove the headlight assemblies.

[@chongomcsenditdluxe8960]

@@IAMASPANNER used to work on Volvo trucks they’re so easy the headlights just fold out 😂😂

[@chongomcsenditdluxe8960]

All this cos I accidentally pulled the headlight retaining clip out on our xc70 😂😂

[@IAMASPANNER]

Oh no, is it just too awkward to do it with the light in situ?

[@chongomcsenditdluxe8960]

@@IAMASPANNER cos it’s the passenger side and the xc70 has the ecu on top of the airbox there’s not enough access, putting it back together now all sorted, just seems needlessly complicated for a headlight, makes up for it in safety I suppose 😀😀

[@berntnilsson8906]

Where can one by the plastic tool for the clips? Great video btw!!

[@IAMASPANNER]

Hi Bernt, www.cleverproducts.co.uk and thank you for the feedback!

[@АндрейТретяк-ш9щ]

Я имел ввиду таким заниматься.😅😅😅 очень много манипуляций для замены... Когда мне будет нечего делать, тогда буду ковыряться так.😅😅😅

[@danielebbeling4056]

Can older model glass assemblies fit to replace these ?

[@mariusdudenas2628]

2000-2004 requires modification of the connector. Motor for height adjusting does not fit for models 00-04 with this Headlamp, but yes you can 😄

[@DutchCarspotter]

Excellent video!!!

[@drew4561]

Were your replacements glass or plastic? I got a rock through mine and really hate to go to all the trouble to replace with glass only to run the risk of it happening again.

[@IAMASPANNER]

If yours is glass then it must be an earlier model, the facelift has plastic headlights. The glass ones don’t deteriorate like the plastic ones do but they outlawed them for safety. You could buy some used ones that are glass and fit them, I’d be surprised if there are any new for sale.

[@imanenglishman]

Conveniently you didn't show replacing the bumper trims. Is that because it was an absolutely nightmare?

[@IAMASPANNER]

I’ve had them off plenty of times with no issue refitting, are they damaged?

[@fidoforme8561]

Excellent ! Many thanks

[@IAMASPANNER]

You’re welcome, thank you!

[@stevehoulihan726]

Any tips on changing the side marker light bulb? I've just bought a 2007MY XC70 and neither of them work.

[@IAMASPANNER]

Hi Steve, looking at mine I think you need to remove the headlight assemblies completely unless you can get in from the wheel arch although even that is blocked by the alarm module on the drivers side.

[@stevehoulihan726]

@@IAMASPANNER Jesus! On some forums some posters have said they've heard you actually pull the wire, which they say, and I agree, sounds bizarre! Can't believe I have to take the bumper off and headlight out to change a bulb. That's madness.

[@IAMASPANNER]

@@stevehoulihan726 I agree it's bonkers when most of the jobs on this car are relatively straight forward when compared to other cars. I wish I could suggest another way but if you can get to the cables that might be your best option.

[@stevehoulihan726]

@@IAMASPANNER Thanks mate. Obviously don't want to pull the cables out of the bulb holders though!

[@IAMASPANNER]

@@stevehoulihan726 no but if it saves you dismantling the car you won’t be in any worse position because the lights don’t work anyway. I hope you get sorted anyway! 🤞

[@graemebrown1191]

The gap at the bottom.. Is that to fit the xc70 bumper

[@IAMASPANNER]

The gap under the lights? I think it’s just a bad shape aftermarket part, the old ones didn’t have the gap.

[@GD0TEP]

Where did you get the lights from???

[@IAMASPANNER]

Prasco, can't remember the brand, maybe TYW, they're already clouding up inside so they have water ingress somewhere.

[@ianhuizinga5487]

Are the push in tabs re-useble?

[@IAMASPANNER]

You’ll have to be more specific, without watching the full video I don’t recall what you mean?

[@andywarrington4738]

early models had glass lenses which dont fade like the cheap plastic ones , damn Ford

[@IAMASPANNER]

They were much better, and the grille used to be made of solid metal too, not just Ford that move to plastic though, everyone moved to plastic. At least the Volvo build quality and reliability was still good at this point.

[@donmoore7785]

Excellent informative video! I have to do the same job.

[@IAMASPANNER]

Thank you and good luck!

[@hahbldmat8988]

How remove n replace new fuel pump

[@IAMASPANNER]

I have done this recently but still haven’t edited the video unfortunately.

[@salomonyosifbulhosenlozano1750]

Exelent video

[@roemerschultz3537]

Thnx brilliant!

[@jrgordon47]

Danger Wil Roberson...Danger...While going through the "Monumental" task of trying to replace a front passenger directional lamp...Something that I'd never expected happened...The Lamp fell into the Headlight assembly...Now I have to go back in there and take the Assembly out to retrieve the lamp...Has anyone ever heard of this happening...EVER......🖖

[@IAMASPANNER]

I’ve lost a few sidelight bulbs in headlamp assemblies before and have dropped the dipped beam before but managed to get it back, it’s not great is it.

[@Charlitos1988]

7:05 7:19 having hard time disconnecting

[@IAMASPANNER]

I imagine you’ll have sorted it by now, did you remove the bulbs complete with the holder?

[@Svisse90Gaming]

Good guide, but really dumb way to transfer part between the old lamp to the new by PUSCHING your new lamp to the floor! To much of a risk getting scratches all over the surface!! Otherwise, good guide

[@IAMASPANNER]

Thanks Jonas, that's what the carpet is for, I always put one down for jobs like this or bumper removals on newer cars.

[@farmdve]

You could have just sanded it down and polished. While the video is informative, the replacement was not needed.

[@IAMASPANNER]

I still have a pair of original headlights I’d like to restore just didn’t have the patience back then, think it would’ve been an MOT failure. The aftermarket ones in the video are already fogging up inside 🤦🏻‍♂️

[@farmdve]

@@IAMASPANNER Well that is unfortunate.

[@JisMeister]

@@IAMASPANNER That's such a shame. For $250 per headlight you can get the original one from Valeo. I got it for a whopping $30! I bought a slightly dull set that I will polish on the outside and clean on the inside. Costs me in total including purchase only 70 dollar for 2!

[@highinthesky64]

👍

[@Иванов_ИИ]

Заебись! То, что искал!

[@filip_tellander]

Thats not a mk2 V70

[@donmoore7785]

Looks like a P2 V70 to me. Mk2 = P2?

[@filip_tellander]

@@donmoore7785 p2? what does the p stand for hah? all i know of is Gen so this would be a gen 2