Suzuki SX4 AWD front brake pads replacement

[@thedallas09]

My local mechanic wanted $200 dollars to change the brake pads on my SX4. I followed your video and did it for way less. Thanks a lot and keep posting!!!

[@UnspokenTreasure]

I used this video to replace my brake pads on my Suzuki. Thanks.

[@Draacid]

Excellent video, all the different angles, and detail particularly with the brake compression really made it clear.

[@volvosweden]

I am glad this helped.

[@MrFreshchico]

2019. Thank you. This is going to help me down the road

[@auxmike]

I enjoyed watching you work. You are careful not messy like shop mechanic!

[@derickpearson1078]

Absolutely excellent proceedures shown. Well done for making it simple.

[@davidstein5062]

Thank you for the video. Very clear with good camera angles. Now off to do it!!

[@volvosweden]

Yes it will work for 2008

[@TriMoot]

PERFECT! Very clear video, and directions. A great job! Thank you!

[@ericsankey5756]

Wow man sorry for whoever gave you thumbs down. This was exactly what I needed! Thank you!

[@joek9588]

You did good work , and lubricate the little metal but you should change it , and also need to check and lubricate the sliding pin.

[@darrellphipps9100]

Great job, Thanks !

[@volvosweden]

No don't use W40. Get proper grease from your local Auto Parts Store. Its a small pouch like 2$.

[@smallcnclathes]

Good video. Is it my imagination or is it that here you have vented discs and in another video they are non vented?

[@mcribs7811]

Great video! Is this the same for a 2007 SX4? I already saved your rear brake video to my favorites.👍

[@bjarturari5517]

thank you, this helped me alot!

[@danabourgeois9553]

So, do you have to use new clips or can you re use the existing ones? Reason for my asking is the ones i got were the wrong clip spacing. And there was only one set.

[@jbikedh]

I just used your vid to do my fiat sedici thx.

[@volvosweden]

Glad it helps.

[@EDENRAIN3]

Is there any that include bleeding the brake lines? My dad always told me it should be done when you change your pads, but for the life of me i cant remember where the nozzle is/how to do it. I was always in the car going pump, pump, hold. 😂

[@bunker931]

very nice tutorial and the quality is outstanding.

[@konstantinsemyakin9692]

Отличные видео по sx4 продолжайте.

[@larrypopejoy9561]

How do you put front brakes on a 2003 Suzuki XL7

[@Tao1988]

thank you

[@eugencoman7198]

Hello all, I would like to replace my brake pads for my Suzuki Sx4 2wd. Could you tell me what characteristics they should have (thickness, height and others)? I found on a website 3 different values for thickness (16, 16.8, 17) and I don't know which one should I order. Thanks

[@volvosweden]

Just go to any auto parts or Suzuki dealer and they will help you.

[@eugencoman7198]

Here aren't this kind of shops. I'm living in a small country.

[@BrunoMN]

That's copper grease?

[@rajup1487]

Open the bleeder plug first after press the piston

[@BrunoMN]

Friend, nice Video! I've a 2010 SX4 AWD and i've bought EBC BRAKE PADS that doesn't came with this grease... do you think i can use WD40 to do this ? Thank you!

[@ghostchaser8338]

No my friend, wd40 is a penetrative fluid and rust inhibitor not for brake jobs of this kind, eventually it will dry out. Use brake grease only, copper or synthetic

[@CriticalThinking-wl3og]

Very good sir very good

[@RoaldKoger]

Yes, it is.

[@vardamanbundren5225]

is the wear indicator on the leading or trailing edge?

[@volvosweden]

It depends on brand of the brake pads.

[@ginge_binge]

Can you make one with rear pad change?

[@volvosweden]

There is one on my channel

[@VirtualLunacy]

thanks.

[@stompme96]

Will this video work for 2008 Suzuki Grand Vitara?

[@volvosweden]

not sure.

[@richardmullins1883]

What was he doing with the g clamp?

[@volvosweden]

Compressing the caliper piston so that the new thick pads would fit.

[@MikePikolon]

I paid way too much to have this work done...should have done this myself

[@volvosweden]

I think my local dealer wanted 250$ including parts for this job.

[@apceron96]

perfect

[@gunsforum]

спасибо за видео! ))) какие-то хитрые пластиночки на колодки ставятся? У меня на "венгре" их нет и в новом комплекте колодок от Girling тоже они отсутствуют. Или это только на "японцах"? Рекомендуют цилиндр под резинкой смазать прежде чем его задвинуть, пробовали? И чем?

[@rustynutz7648]

Its ALWAYS snowing in Russia

[@TheMisterMib]

Огромное Спасибо за видео,очень познавательно. Вопрос.Передние такой же метод замены?. to HFFFunny. Просто долей тормозуху.Автор показал где клапан.Удачи

[@RobsonFerreira]

Hello i'm fron Brasil end i have one SX4 it's posibilt you teke me a PN front end back side if is posibilit oders pads write too i want all 8 parts Sorry my words Robson

[@ИванТкалич-о9щ]

Привет а на русском меньше просмотров ?

[@richardjalbert1334]

why dont you open the bleeder to evacuate old burn oil? you push back contaminated oil to master cylinder..you dont lubricate slide guide pins. lubricate under the hardware plates, between pads support and slide plates? cheap amateur jobs. sorry

[@robertr9372]

Can you provide a video to show the steps you mentioned?

[@MrFreshchico]

I am interested in your video as well please.

[@chrisnelson2465]

Excellent video. You gave good clear concise instructions. Thank you so much !

[@MrJoshdude101]

Thanks