Vortex Blow Torch Review | Is this the Best Blowtorch on the Market ?

Welcome to my review of the Arctic Hayes Vortex Blowlamp Brazing Torch. In this video i will give you a demonstration and show you a bit about the torch and my opinion of whether this is the best blowtoch on the market!
Link to buy the blow torch - amzn.to/2TjlopF
If you like the content leave a like and please subscribe for more content like this as I've got a lot more to come and there will be something that will help you out.
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The DIY Guy may earn affiliate commission if you purchase via the recommended links. These links will not cost you any extra.

[@Comm0ut]

Given your large audience a video on the classic air/LP and air/acetylene torches like TurboTorch. Prestolite, Goss, Uniweld and others have made for about a century could be a winner. Most home gamers using the simplest LP torches don't know how much more versatile the next step up can be. You'll have fun doing it. Their small heads and tip variety make them highly versatile and their simplicity makes buying used torches a safe bet while saving considerable money. The HVAC etc world has many useful tools more viewers should know about.

[@manninghr1]

cheers just purchased one after watching your review.

[@TheDIYGuy1]

Great, enjoy

[@Olleh987]

Is it good?

[@herobo123456]

Ya nice review

[@Jimmynoglue]

Good review thanks, I prefer the blue propane tom mapp gas as I find it heats more evenly, hard to describe but if you hold the torch undue say a 22mm fitting and feed the solder in from the top, by the time the top of the fitting is hot enough so the solder flows the bottom of the fitting in contact with the flame has been over heated and the flux burnt off. But then loads of my colleagues swear by Mapp, personal preference I suppose. Myles time served professional plumber 25+yrs.

[@TheDIYGuy1]

Great comments thanks

[@seanditch4419]

Is it normal for the ends of the nozzle like you have attached to glow red?

[@dominicagbata5995]

Can it be used for torch down installation?

[@alexnicanovich3636]

Hiya am new to your page found it very easy to understand as i have aspergers (autism) and am now getting my own to Yakasugi some timber to waterproof it. Could you do a video on using coach screws to secure wood planks to metal bench legs or suggest a video as i want to create my own garden bench. do you do weekly projects we can follow along or get inspirations from?

[@TheDIYGuy1]

Thanks. Glad you liked the video

[@6lr6ak6]

Good torch, l got mine a year ago, mate give me 4 emptys, l fill them from my 47kg Propane, gotta leave the emptys in the freezer first, just as good as using Map cost loads less😄

[@bells1969]

Great review tool station had them for £55 a great buy

[@TheDIYGuy1]

Thanks!

[@PritchyTurbo2000]

£78 now, bit of an increase

[@FantaLord007]

Got mine for £35@@PritchyTurbo2000

[@deanshalloe]

I've got one of these from toolstation today. I will use it for heating up seized nuts and bolts etc. What sort of run time would you expect out of a bottle?

[@TheDIYGuy1]

👍

[@nivea123]

Thanks... but I wish you showed how to connect the cannister to the torch first :/

[@foxconNI]

Hi,are you still using this torch.

[@philipdickinson9273]

Which actual model number is it?

[@Stratoszero]

Wish Id seen this before I bought a Rothenberger with its horrible fat flame.

[@TheDIYGuy1]

Ahhh

[@kgztn]

Why isn’t this available in the US?

[@poorfordtransitowner1627]

Us brits invented plumbing pal

[@jonm7272]

How about a bit less waffle, show the flame against a dark background so we can actually see it, for All three nozzles and, o, I don't know, maybe actually show us it heating up some metal!! That wasn't a review video, it was a crap instruction manual plus a lot of you saying you loved it.

[@diljitjedi]

Mighty mind has been made up you have sold it to me going down after Christmas to get one I'm only a DIY so I don't need something that is going to be expensive and that has to work every single time probably get used once or twice a year on copper pipes cheers bud

[@TheDIYGuy1]

Great points 👍